Product.ai
Product.ai / Buying Guides / Running shoes

Product.ai Buying Guide

What are the best running shoes?

Most running shoe searches split between carbon-plated race shoes and everyday cushioned trainers, because race foam cuts running effort by 4% when new yet matches standard foam by 450 km (280 miles). Below is how Adidas, Altra, ASICS, Brooks, HOKA, New Balance, Nike, On, and Saucony compare on foot width, heel-to-toe drop (heel-to-forefoot offset), and foam wear.

The category answer

What are the best running shoes?

Most running shoe searches split between carbon-plated race shoes and everyday cushioned trainers, because race foam cuts running effort by 4% when new1 yet matches standard foam by 450 km (280 miles)2. Below is how Adidas, Altra, ASICS, Brooks, HOKA, New Balance, Nike, On, and Saucony compare on foot width3, heel-to-toe drop (heel-to-forefoot offset)4, and foam wear.

Sources and scope notes

Source-checked November 2, 2026 against biomechanics studies, randomized trials, and materials research from Product.ai's primary-source research.

Powered by Axioms.aiZero affiliate linksFalsifiable findings
Powered by Axioms.aiAll 34 findings passed the source check on November 2, 2026.
Zero affiliate linksThis page has no affiliate links.
Falsifiable findingsAll 34 findings name what would prove them wrong.

8 questions not yet answered on this page.How this page knows ↓

Contents: 6 topics and 4 questions

The answer in one sentence

Fresh polyether block amide (PEBA) racing foam cuts running energy cost by 4% when new, but loses that edge by 450 km (280 miles). Clinical reviews recommend lightweight, comfortable everyday trainers with minimal pronation control, matched to your foot width and running frequency.

About the readings on this page

Checked readings cited on this page
43
Have a recorded test that would prove them wrong
43
Last source check
2026-11-02
Questions answered in full
9
Each reading names its source in the sentence, records who checked it and when, and states what would prove it wrong. The sources footer lists every source link and quote.

Major running shoe brands

How do Brooks, New Balance, HOKA, On, Nike, ASICS, Adidas, Saucony, and Altra compare?

Nine brands anchor peer-reviewed biomechanics, metabolic running economy, and foot-morphology studies, organized across four runner archetypes: daily trainers and multi-width fit leaders (Brooks, New Balance), maximalist and rocker cushion (HOKA, On), carbon-plated PEBA race and tempo super-shoes (Nike, ASICS, Adidas, Saucony), and zero-drop anatomical toe boxes (Altra):

Brooks logo

Brooks

Comfort filter and minimal pronation control
Economy or impact
Coming soon
Fit or drop
At least 3 shoe widths per length class are needed to fit 90% of runners
Foam wear
Coming soon

A 2015 British Journal of Sports Medicine review proposed the preferred movement path and comfort filter, where runners pick a comfortable shoe that lets them keep their natural stride. A 2022 clinical review of four footwear paradigms found limited evidence for pronation control and recommended lightweight, comfortable shoes with minimal pronation control, while a 2019 study of 5 mm foot-length increments showed at least 3 shoe widths per length class are needed to fit 90% of runners.

New Balance logo

New Balance

3 shoe widths per length class and PEBA foam
Economy or impact
Coming soon
Fit or drop
At least 3 shoe widths per length class are needed to fit 90% of customers
Foam wear
PEBA foam gives a running economy advantage over EVA when new, but after 450 km both foams perform similarly

A 2019 Scientific Reports study found significant foot-shape differences across regions and sexes and concluded that at least 3 shoe widths per length class are needed to fit 90% of customers. A 2024 study showed that polyether block amide (PEBA) foam gives a clear running economy advantage over ethylene-vinyl acetate (EVA) when new, but after 450 km both foams perform similarly.

HOKA logo

HOKA

Maximalist shoe and thicker soles
Economy or impact
Maximalist shoe produced 10.7% higher impact peak and 12.3% higher loading rate at 14.5 km/h
Fit or drop
Thicker soles increased stance time, ankle dorsiflexion, and foot eversion
Foam wear
Coming soon

In a 2018 biomechanics study, a maximalist shoe produced a 10.7% higher impact peak and 12.3% higher loading rate than a conventional shoe at 14.5 km/h (and a 6.4% higher impact peak at 10 km/h) because runners landed with a stiffer leg. Two 2026 reviews of 14 sole-thickness studies and eight footwear brands found thicker soles increased stance time, ankle dorsiflexion, and foot eversion, while commercial rocker descriptions lacked consistent measurable thresholds.

On logo

On

Cloudboom Echo 3 and Cloudrunner 2
Economy or impact
Oxygen cost was 5.4 ml O2/kg/km lower in On Cloudboom Echo 3 than in On Cloudrunner 2
Fit or drop
Ball-of-foot energy absorption was higher in low-stiffness shoes than in high-stiffness shoes (0.21 versus 0.13 J/kg)
Foam wear
Coming soon

In a 2026 crossover study of 14 moderately-trained runners at 7.5, 9.0, 10.5, and 12.0 km/h, oxygen cost across all speeds was 5.4 ml O2/kg/km lower in the On Cloudboom Echo 3 than in the On Cloudrunner 2. In a 2025 biomechanics study across low (0.31 Nm/deg), medium (0.40 Nm/deg), and high (0.48 Nm/deg) longitudinal bending stiffness, ball-of-foot energy absorption was higher in low-stiffness shoes than in high-stiffness shoes (0.21 versus 0.13 J/kg).

Nike logo

Nike

PEBA super-shoe and prototype racing shoes
Economy or impact
Prototype racing shoes reduced running energy cost by 4.16% compared with Nike Zoom Streak 6
Fit or drop
Coming soon
Foam wear
PEBA super-shoe energy cost rose after 450 km of wear (from 14.87 to 15.21 W/kg)

In a 2018 study of 18 runners, Nike prototype racing shoes reduced running energy cost by 4.16% compared with the Nike Zoom Streak 6 and 4.01% compared with the Adidas Adios Boost 2. In a 2024 crossover trial at 13 km/h, PEBA super-shoe energy cost rose significantly after 450 km of wear (from 14.87 to 15.21 W/kg), while EVA shoes showed no significant change (15.15 to 15.13 W/kg).

ASICS logo

ASICS

Metaspeed Sky+ and carbon-plated shoes
Economy or impact
Carbon-plated shoes with resilient foams improved running economy by 2.6 to 4.2%
Fit or drop
Coming soon
Foam wear
Coming soon

In a 2026 crossover trial of 22 trained runners at marathon pace (15.0 km/h) across the Asics Metaspeed Sky+, Nike Alphafly Next% 2, and Puma Fast-R Nitro Elite v1, shorter ground contact time was linked to lower energy cost, with about a 1% running economy gain per 4 ms reduction. A 2026 systematic review found that carbon-plated shoes with resilient foams improved running economy by 2.6 to 4.2%, and by 2 to 6% during prolonged running.

Adidas logo

Adidas

Adios Boost 2 and Adios Pro Evo 1
Economy or impact
Nike prototype cost 4.01% less energy than Adidas Adios Boost 2
Fit or drop
Coming soon
Foam wear
Coming soon

In a 2018 Sports Medicine study across three running speeds with shoe mass matched, running in the Nike prototype cost 4.01% less energy than in the Adidas Adios Boost 2 (16.45 versus 17.14 W/kg). In a 2026 study of 15 trained runners, a prototype advanced footwear shoe improved running economy by 3.54% over the Adidas Adios Pro Evo 1.

Saucony logo

Saucony

Endorphin Pro 3 and Kinvara
Economy or impact
Oxygen uptake drift was lower in Saucony Endorphin Pro 3 than in Saucony Kinvara (0.00056 versus 0.00088 mL/kg/min)
Fit or drop
Coming soon
Foam wear
Coming soon

In a 2025 randomized crossover study of 15 trained distance runners over 60-minute treadmill runs at about 75% of critical speed, oxygen uptake drift was lower in the Saucony Endorphin Pro 3 than in the Saucony Kinvara control shoe (0.00056 versus 0.00088 mL/kg/min), and postrun vertical impulse dropped by 0.2% versus 4.9%. A 2023 study of advanced footwear found individual responses ranging from an 11.3% drawback to an 11.4% benefit in world-class Kenyan runners and a 9.7% benefit to a 1.1% drawback in European amateurs.

Altra logo

Altra

0 mm heel-to-toe drops and minimalist footwear
Economy or impact
Coming soon
Fit or drop
6 mm and 0 mm drops: lower injury risk in occasional runners (0.48), higher in regular runners (1.67)
Foam wear
Supervised retraining of at least 12 weeks may support adaptation

In a 6-month trial of 553 runners across 10 mm, 6 mm, and 0 mm heel-to-toe drops, low-drop shoes (6 mm and 0 mm) were linked to lower injury risk in occasional runners (hazard ratio 0.48) but higher injury risk in regular runners (hazard ratio 1.67). A 2026 meta-analysis found that transitioning to minimalist footwear raised injury risk (effect size 3.529), while supervised retraining of at least 12 weeks may support adaptation, and a 2019 foot-scan study found that at least 3 widths per length class are needed to fit 90% of shoppers.

How Product.ai knows this21

In a 2026 Journal of Sport and Health Science study of 15 trained runners (11 males and 4 females), Healey and colleagues found that running economy in a prototype advanced footwear technology (AFT) shoe, the FR3, was 3.15% ± 1.24%, 3.62% ± 1.25%, and 3.54% ± 1.16% (mean ± SD) better than in the PUMA Fast-R 2, the Nike Alphafly 3, and the Adidas Adios Pro Evo 1 (all p < 0.001), and every individual performed best in the FR3. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled metabolic testing showing the FR3 prototype is not better in running economy than the PUMA Fast-R 2, Nike Alphafly 3, or Adidas Adios Pro Evo 1, or that fewer than all runners performed best in it.

In a 2018 Sports Medicine study of runners at three velocities, Hoogkamer, Kram and Arellano found that, averaged across all three velocities and with shoe mass matched, the energetic cost of running in the NP shoes (16.45 ± 0.89 W/kg) was 4.16% lower than in the NS shoes (17.16 ± 0.92 W/kg) and 4.01% lower than in the AB shoes (17.14 ± 0.97 W/kg), both p < 0.001. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Metabolic crossover trials showing the energetic cost of running in the NP shoes is not lower than in the AB shoes when shoe mass is matched.

In a 2016 American Journal of Sports Medicine study of 553 leisure-time runners observed for 6 months after receiving shoes with a heel-to-toe drop of 10 mm, 6 mm, or 0 mm, Malisoux and colleagues found that low-drop shoes (6 mm and 0 mm) were associated with lower injury risk in occasional runners (hazard ratio, HR, 0.48; 95% confidence interval, CI, 0.23 to 0.98) but higher injury risk in regular runners (HR 1.67; 95% CI 1.07 to 2.62). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Six-month injury data from leisure-time runners showing low-drop shoes (6 mm or 0 mm) are not associated with lower injury risk in occasional runners, or are associated with equal or lower injury risk in regular runners.

A 2026 Gait and Posture meta-analysis found that transitioning to minimalist footwear was associated with a moderate increase in injury risk (overall effect size, a standardized measure of the difference, 3.529; 95% CI 2.41 to 4.646), most frequently bone marrow edema (swelling inside the bone) in the metatarsal region, Achilles tendinopathy (tendon pain above the heel), and calf pain, related to adopting a forefoot strike pattern, and noted that supervised retraining programs of at least 12 weeks may support progressive adaptation of the musculoskeletal system and reduce injury risk. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials of runners transitioning to minimalist footwear showing no increase in injury risk, or no link between the transition and metatarsal bone marrow edema, Achilles tendinopathy, or calf pain.

In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, that a shoe designed for a single group fits a different segment of the population in another group, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Foot scan data showing that fewer than 3 shoe widths per length class still provide a proper fit for 90% of customers, or that a shoe designed for one group fits the same segment of the population in another group.

In a 2026 Sports Medicine - Open crossover trial of 22 trained long-distance runners (50% female) running multiple 5-minute bouts at their season's best marathon pace (15.0 ± 2.3 km/h) in the Asics Metaspeed Sky+, Nike Air Zoom Alphafly Next% 2, and Puma Fast-R Nitro Elite v1, shorter ground contact time was significantly associated with lower energetic cost of transport (the energy used to cover a distance; p = 0.002), reflecting a ~1% improvement in running economy per 4 ms decrease. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing across advanced footwear models at marathon pace showing that shorter ground contact time is associated with higher or unchanged energetic cost of transport.

A 2026 BMC Sports Science, Medicine and Rehabilitation systematic review found that carbon-fibre plate shoes with resilient midsole foams improved running economy by 2.6 to 4.2%, with some models improving running economy during prolonged running by 2 to 6%. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled metabolic trials showing carbon-fibre plate shoes with resilient midsole foams improve running economy by less than 2.6%.

In a 2015 British Journal of Sports Medicine review, Nigg and colleagues noted the lack of conclusive evidence for two variables once thought to be the prime predictors of running injuries, and suggested two new paradigms, the preferred movement path and the comfort filter, in which a runner intuitively selects a comfortable product that lets them stay in their preferred movement path. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials showing conclusive evidence that the two variables once thought to be the prime predictors of running injuries do predict them.

In a 2022 Frontiers in Sports and Active Living clinical review of four paradigms (Pronation Control, Impact Force Modification, Habitual Joint Motion Path, and Comfort Filter), Agresta and colleagues found that evidence in support of any paradigm is generally limited and, in the absence of a clearly supported paradigm, proposed that in general clinicians should recommend footwear that is lightweight, comfortable, and has minimal pronation control technology (features that limit the inward roll of the foot). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Randomized clinical trials showing clear evidence that any one of the four paradigms, such as pronation control, reduces injury in recreational runners.

In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width for each length class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Foot scan datasets showing that a single medium shoe width accommodates over 90% of customers across all 5mm length classes.

In a 2018 Scientific Reports biomechanics study, Kulmala and colleagues found that at the faster running speed (14.5 km/h) the ground reaction force impact peak and loading rate (how quickly force builds) were 10.7% and 12.3% greater in a maximalist shoe than in a conventional shoe, with only a slightly higher impact peak (6.4%) at 10 km/h, and the authors attributed the greater impact loading to a stiffer leg during landing. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-plate and motion-capture measurements showing maximalist shoes do not raise impact peak or loading rate at 10 and 14.5 km/h, or that leg stiffness at landing is not higher in maximalist shoes.

A 2026 Sports Medicine - Open systematic review of 14 studies, mostly of male recreational or experienced runners, found that thicker soles were linked to increased stance time (time on the ground), more ankle dorsiflexion (toes pulled toward the shin) at initial contact, and increased peak eversion (inward roll of the foot) in the frontal plane. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled kinematic studies across sole thicknesses showing that thicker soles are linked to decreased peak eversion in the frontal plane.

A 2026 Journal of Foot and Ankle Research scoping review of academic sources and commercial materials from eight leading footwear brands found that academic sources used diverse terminology with no consistent definition or threshold for what counts as a rocker (a curved sole shape), and that commercial descriptions relied on qualitative brand-specific language lacking measurable parameters. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Standardized quantitative disclosures across major footwear brands specifying exact rocker apex percentages, curvature radii, and rocker angles per model.

In a 2019 Scientific Reports study, Jurca and colleagues reported statistically significant differences in mean foot measurements across regions and sexes along with large dispersion within each customer group, concluding that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Population 3D foot scan studies showing that a single shoe width fits at least 90% of customers within a length class.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues concluded that incorporating polyether block amide (PEBA) rather than ethylene-vinyl acetate (EVA) in advanced footwear technology (AFT, shoes shown to improve running economy) gives a clear running economy (RE) advantage when the models are new, but after 450 km of use the PEBA and EVA shoes have similar running economy. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled metabolic testing showing no running economy difference between new PEBA and new EVA advanced footwear, or a PEBA advantage that persists after 450 km of use.

In a 2024 Scandinavian Journal of Medicine and Science in Sports randomized crossover study across four 4-minute trials at 13 km/h, Rodrigo-Carranza and colleagues found that energy cost in polyether block amide (PEBA) advanced footwear increased significantly after 450 km of wear compared with new (15.21 ± 1.01 versus 14.87 ± 0.99 W/kg, p < 0.05), whereas ethylene-vinyl acetate (EVA) shoes showed no significant difference between worn and new (15.13 ± 1.14 versus 15.15 ± 1.13 W/kg). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing showing no significant increase in energy cost in PEBA advanced footwear after 450 km of wear, or a significant increase in EVA advanced footwear after 450 km of wear.

In a 2018 Sports Medicine study, Hoogkamer, Kram and Arellano found that compared with the existing racing shoes (NS and AB), the new NP shoes reduced the energetic cost of running in all 18 subjects tested; averaged across three velocities and with shoe mass matched, running in the NP shoes (16.45 ± 0.89 W/kg) cost 4.16% less than in the NS shoes and 4.01% less than in the AB shoes. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Independent crossover metabolic trials showing the NP shoes did not reduce energetic cost relative to the NS and AB racing shoes.

In a 2026 Sports Medicine - Open crossover study of 14 moderately-trained runners at 7.5, 9.0, 10.5, and 12.0 km/h, oxygen cost (the oxygen used per kilogram of body weight per kilometer) combined across all tested speeds was 5.4 ml O2/kg/km lower in the On Cloudboom Echo 3, an advanced footwear technology (AFT) shoe, than in the traditional On Cloudrunner 2 (95% CI, 3.9 to 6.9 lower; p < 0.001). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing at several speeds showing no oxygen cost difference between the On Cloudboom Echo 3 and the On Cloudrunner 2.

In a 2025 Frontiers in Sports and Active Living biomechanics study testing shoes with low (0.31 Nm/deg), medium (0.40 Nm/deg), and high (0.48 Nm/deg) longitudinal bending stiffness (LBS, how much the shoe resists bending along its length), negative work (energy absorbed) at the metatarsophalangeal (MTP, ball-of-foot) joints was significantly higher in the low-stiffness shoes than in the high-stiffness shoes (0.21 ± 0.05 versus 0.13 ± 0.05 J/kg, p = 0.001). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Joint-force calculations showing that negative work at the MTP joints is equal or lower in low-stiffness shoes than in high-stiffness shoes.

In a 2025 International Journal of Sports Physiology and Performance randomized crossover study of 15 trained distance runners completing two 60-minute treadmill runs at about 75% of critical speed, oxygen uptake drift (the slow rise in oxygen use over a run) was significantly lower in the Saucony Endorphin Pro 3, an advanced footwear technology (AFT) shoe, than in the Saucony Kinvara control shoe (0.00056 versus 0.00088 mL/kg/min; P = .018), and postrun vertical impulse decreased by only 0.2% in the AFT versus 4.9% in control (P = .016). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Extended 60-minute metabolic trials showing no difference in oxygen uptake drift or postrun vertical impulse between the Saucony Endorphin Pro 3 and the Saucony Kinvara.

In a 2023 Sports Medicine study, Knopp and colleagues found large individual variability in running economy with advanced footwear technology compared with a flat racing shoe: world-class Kenyan road runners ranged from an 11.3% drawback to an 11.4% benefit, and amateur Europeans from a 9.7% benefit to a 1.1% drawback, while a post-hoc meta-analysis found an overall significant medium benefit compared with traditional flats. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Metabolic testing across runners showing every runner has the same running-economy response to advanced footwear technology.

Run type & weekly mileage

Which running shoes fit daily training, race day, or zero-drop running?

Each row links how you run and your foot shape to the right shoe setup and the research behind it. Unchecked rows say 'Coming soon'.

Race 5K to marathon on the road

What fits

Fresh PEBA carbon-plated super-shoes (Nike Alphafly or Vaporfly, ASICS Metaspeed, Adidas Adios Pro, Saucony Endorphin Pro, On Cloudboom)

Why it fits

Resilient PEBA foam and stiffening plates cut running energy cost by 2.6% to 4.2% when new, mainly by returning foam energy and stiffening the ball of the foot.

Log high weekly training mileage

What fits

EVA or dual-foam daily trainers rotated before 450 to 500 km

Why it fits

PEBA super-shoes lose their running economy edge over EVA by 450 km, and peak pressure under the foot doubles after 500 km of wear.

Want an everyday road trainer for comfort and injury prevention

What fits

Lightweight, comfortable neutral shoes with minimal pronation control

Why it fits

Clinical reviews find limited evidence for pronation-control wedges and recommend picking a comfortable shoe that lets your leg follow its preferred movement path.

Run regularly and want to try zero-drop or minimalist shoes

What fits

6 mm to 10 mm drop for high-mileage runners, or a 12-week gradual transition for 0 mm drop

Why it fits

Low-drop (0 to 6 mm) shoes raised injury risk in regular runners (HR 1.67) and increased ankle braking forces compared with 6 mm and 10 mm drops.

Have wide feet, high insteps, or buy women's sizes

What fits

Brands offering at least 3 widths per length class and sex-specific lasts (New Balance, Brooks, Altra) with room for 1.4% foot swelling

Why it fits

3D foot-scan studies show at least 3 widths per size are needed to fit 90% of runners, male and female feet differ across four foot-shape variables, and feet swell 1.4% after 10 minutes of weight-bearing.

Run technical, muddy, or rocky trails

What fits

Coming soon

Need waterproof winter or rain running shoes

What fits

Coming soon

Race on a track or cross-country course

What fits

Coming soon
If you...What fitsWhy it fits
Race 5K to marathon on the road

Fresh PEBA carbon-plated super-shoes (Nike Alphafly or Vaporfly, ASICS Metaspeed, Adidas Adios Pro, Saucony Endorphin Pro, On Cloudboom)

Resilient PEBA foam and stiffening plates cut running energy cost by 2.6% to 4.2% when new, mainly by returning foam energy and stiffening the ball of the foot.

Log high weekly training mileageEVA or dual-foam daily trainers rotated before 450 to 500 km

PEBA super-shoes lose their running economy edge over EVA by 450 km, and peak pressure under the foot doubles after 500 km of wear.

Want an everyday road trainer for comfort and injury preventionLightweight, comfortable neutral shoes with minimal pronation control

Clinical reviews find limited evidence for pronation-control wedges and recommend picking a comfortable shoe that lets your leg follow its preferred movement path.

Run regularly and want to try zero-drop or minimalist shoes6 mm to 10 mm drop for high-mileage runners, or a 12-week gradual transition for 0 mm drop

Low-drop (0 to 6 mm) shoes raised injury risk in regular runners (HR 1.67) and increased ankle braking forces compared with 6 mm and 10 mm drops.

Have wide feet, high insteps, or buy women's sizes

Brands offering at least 3 widths per length class and sex-specific lasts (New Balance, Brooks, Altra) with room for 1.4% foot swelling

3D foot-scan studies show at least 3 widths per size are needed to fit 90% of runners, male and female feet differ across four foot-shape variables, and feet swell 1.4% after 10 minutes of weight-bearing.

Run technical, muddy, or rocky trailsComing soonComing soon
Need waterproof winter or rain running shoesComing soonComing soon
Race on a track or cross-country courseComing soonComing soon
How Product.ai knows this13

In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

A multi-region foot measurement dataset showing that a single standard width per length class accommodates at least 90% of customers across regions and sexes.

In a 2010 Research in Sports Medicine study, Krauss and colleagues found that the width differences between shoe lasts (the foot-shaped molds shoes are built on) and foot types varied from 0 to 9 mm. Length scaling across sizes was similar for lasts and feet (differences under 1 mm), but width scaling was larger in lasts than in feet (3.5 to 5.9 mm). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Measurements of shoe lasts and feet across sizes showing that width differences between lasts and foot types stay within 1 mm and that last width scaling per size matches foot width scaling.

In a 2001 Medicine and Science in Sports and Exercise anthropometry (body measurement) study, Wunderlich and Cavanagh found that after normalizing measurements by foot length, men and women differed significantly in two calf, five ankle, and four foot shape variables, and sex was correctly classified 85% of the time from the standardized variables. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Body measurements normalized by foot length showing no significant differences between men and women in calf, ankle, and foot shape, with sex classified correctly only about half the time.

In a 2008 North American Journal of Sports Physical Therapy study, McWhorter and colleagues measured a statistically significant 1.4% increase in mean foot volume (742.39 ml before, 753.03 ml after) following 10 minutes of weight-bearing treadmill walking. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Volume measurements of the foot before and after 10 minutes of weight-bearing treadmill walking showing no change in foot volume.

In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width per class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Population foot scan distributions showing that 90% of customers within a 5mm foot-length class are properly accommodated by a single standard shoe width size.

In a 2003 Gait and Posture study, Nester and colleagues found that medially wedged orthoses (shoe inserts with a raised inner edge) decreased rearfoot pronation (the inward roll of the heel) and increased the sideways ground reaction force during the contact phase, which the authors read as suggesting reduced shock attenuation. Effects on knee, hip, and pelvis movement were generally minimal. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Motion and force measurements showing that medially wedged orthoses leave rearfoot pronation unchanged or lower the sideways ground reaction force during the contact phase.

In a 2011 Journal of Athletic Training review, Mills and colleagues found no significant difference in the risk of lower limb overuse conditions between custom and prefabricated foot orthoses (relative risk, RR, 1.14; 95% confidence interval, CI, 0.90 to 1.44, a range that includes 1.0, meaning no clear difference), based on 2 randomized controlled trials (RCTs) reported in 1 study. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Randomized trials showing custom foot orthoses significantly lower the risk of lower limb overuse conditions compared with prefabricated orthoses, with a relative risk whose confidence interval excludes 1.0.

In a 1998 Proceedings of the Royal Society B study, Ferris, Louie and Farley found that human runners adjust their leg stiffness to match changes in surface stiffness, which lets them keep similar running mechanics on different surfaces. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-plate and motion measurements of humans running on surfaces of different stiffness showing constant leg stiffness together with markedly different running mechanics on each surface.

In a 2010 Nature study, Lieberman and colleagues showed that on hard surfaces, barefoot runners who land on the forefoot generate smaller collision forces than shod (shoe-wearing) rearfoot strikers, primarily because they land with a more plantarflexed foot (toes pointed down) and more ankle compliance, which lowers the effective mass of the body that collides with the ground. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Impact force measurements on hard surfaces showing that barefoot forefoot strikers generate equal or larger collision forces than shod rearfoot strikers.

In a 2003 update in The Anatomical Record Part A, Frost described how load-bearing bones in free-living vertebrates adapt their strength to the mechanical loads on them, with voluntary mechanical usage determining most of the strength of healthy bones after birth in ways that minimize nontraumatic fractures and create a bone-strength safety factor. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Studies of load-bearing bone in vertebrates after birth showing that bone strength does not change in response to the mechanical loads placed on the bone.

In a 1989 Acta Physiologica Scandinavica study of 12 healthy men on a force platform (a floor sensor that measures each footstep), Nilsson and Thorstensson showed that as running speed increased from 1.5 to 6.0 m/s the force periods got shorter and the peak vertical ground reaction force (the peak upward push from the ground) rose from approximately 2.0 to 2.9 body weights. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-platform measurements of runners across 1.5 to 6.0 m/s showing constant force-period duration or falling peak vertical ground reaction force as speed increases.

In a 2000 Journal of Applied Physiology study of 33 runners whose top speeds on a level treadmill ranged from 6.2 to 11.1 m/s, Weyand and colleagues found that the time taken to swing the leg forward for the next step did not vary with top speed (P = 0.18), while the average force applied to the ground relative to body weight was 1.26 times greater for a runner with a top speed of 11.1 m/s than for one with 6.2 m/s. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Treadmill force-plate data showing that faster top speeds come mainly from shorter leg swing times rather than from greater average ground force relative to body weight.

In a 2002 Journal of Physiology study using microneurography (recording electrical activity from single nerve fibers) on 104 touch receptors in the skin of the human foot sole, Kennedy and Inglis found that 57% (59 units) were fast-adapting type I, 14% (14 units) were fast-adapting type II, 14% (15 units) were slow-adapting type I, and 15% (16 units) were slow-adapting type II. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Microneurography recordings of touch receptors in human foot-sole skin showing more slow-adapting than fast-adapting units.

Cushioned vs. stability shoes

What are the best cushioned or stability running shoes, and do you need pronation control?

While mechanical lab benches score thick soles on shock absorption, human runners stiffen their legs on maximalist foam (raising impact peaks by 10.7% at 14.5 km/h), and clinical reviews favor the comfort filter over pronation-control stability wedges:

In a 2015 British Journal of Sports Medicine review and a 2022 clinical review of four footwear paradigms, authors found limited evidence for pronation control or impact force modification and recommended lightweight, comfortable shoes with minimal pronation control.

In a 2003 study, medially wedged orthoses reduced rearfoot pronation and increased sideways ground reaction force with minimal effect on knee, hip, or pelvis motion, and a 2011 review of 2 randomized trials found no significant difference in lower-limb overuse injury risk between custom and prefabricated orthoses (relative risk 1.14, 95% CI 0.90 to 1.44).

In a 2018 study, a maximalist shoe produced a 10.7% higher impact peak and 12.3% higher loading rate than a conventional shoe at 14.5 km/h (and 6.4% higher at 10 km/h) because runners stiffened their legs during landing, while a 2026 review of 14 studies linked thicker soles to longer stance time, greater ankle dorsiflexion, and greater foot eversion.

How Product.ai knows this6

In a 2015 British Journal of Sports Medicine review, Nigg and colleagues noted the lack of conclusive evidence for two variables once thought to be the prime predictors of running injuries, and suggested two new paradigms, the preferred movement path and the comfort filter, in which a runner intuitively selects a comfortable product that lets them stay in their preferred movement path. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials showing conclusive evidence that the two variables once thought to be the prime predictors of running injuries do predict them.

In a 2022 Frontiers in Sports and Active Living clinical review of four paradigms (Pronation Control, Impact Force Modification, Habitual Joint Motion Path, and Comfort Filter), Agresta and colleagues found that evidence in support of any paradigm is generally limited and, in the absence of a clearly supported paradigm, proposed that in general clinicians should recommend footwear that is lightweight, comfortable, and has minimal pronation control technology (features that limit the inward roll of the foot). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Randomized clinical trials showing clear evidence that any one of the four paradigms, such as pronation control, reduces injury in recreational runners.

In a 2003 Gait and Posture study, Nester and colleagues found that medially wedged orthoses (shoe inserts with a raised inner edge) decreased rearfoot pronation (the inward roll of the heel) and increased the sideways ground reaction force during the contact phase, which the authors read as suggesting reduced shock attenuation. Effects on knee, hip, and pelvis movement were generally minimal. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Motion and force measurements showing that medially wedged orthoses leave rearfoot pronation unchanged or lower the sideways ground reaction force during the contact phase.

In a 2011 Journal of Athletic Training review, Mills and colleagues found no significant difference in the risk of lower limb overuse conditions between custom and prefabricated foot orthoses (relative risk, RR, 1.14; 95% confidence interval, CI, 0.90 to 1.44, a range that includes 1.0, meaning no clear difference), based on 2 randomized controlled trials (RCTs) reported in 1 study. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Randomized trials showing custom foot orthoses significantly lower the risk of lower limb overuse conditions compared with prefabricated orthoses, with a relative risk whose confidence interval excludes 1.0.

In a 2018 Scientific Reports biomechanics study, Kulmala and colleagues found that at the faster running speed (14.5 km/h) the ground reaction force impact peak and loading rate (how quickly force builds) were 10.7% and 12.3% greater in a maximalist shoe than in a conventional shoe, with only a slightly higher impact peak (6.4%) at 10 km/h, and the authors attributed the greater impact loading to a stiffer leg during landing. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-plate and motion-capture measurements showing maximalist shoes do not raise impact peak or loading rate at 10 and 14.5 km/h, or that leg stiffness at landing is not higher in maximalist shoes.

A 2026 Sports Medicine - Open systematic review of 14 studies, mostly of male recreational or experienced runners, found that thicker soles were linked to increased stance time (time on the ground), more ankle dorsiflexion (toes pulled toward the shin) at initial contact, and increased peak eversion (inward roll of the foot) in the frontal plane. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled kinematic studies across sole thicknesses showing that thicker soles are linked to decreased peak eversion in the frontal plane.

Carbon-plated super-shoes

Are carbon-plated super-shoes worth it for marathon racing and training?

Carbon-plated shoes with resilient polyether block amide (PEBA) foam cut running energy cost by 2.6% to 4.2% on average when fresh, though the foam provides most of the energy return and individual results vary widely:

In a 2018 Sports Medicine study of 18 runners, Nike prototype super-shoes reduced running energy cost by 4.16% versus the Nike Zoom Streak 6 and 4.01% versus the Adidas Adios Boost 2, and a 2026 systematic review found 2.6% to 4.2% economy gains across carbon-plated shoes (and 2% to 6% during prolonged running).

A 2019 study showed that mechanical energy is stored and returned by compressing the midsole foam rather than bending the carbon plate, and a 2021 study found that cutting the carbon plate in the Nike Vaporfly 4% did not significantly change running economy (0.55% difference, 95% CI -1.44% to 0.40%), while a 2025 study showed high bending stiffness (0.48 versus 0.31 Nm/deg) reduced energy loss at the ball of the foot (0.13 versus 0.21 J/kg).

Across 2025 and 2026 crossover trials, the On Cloudboom Echo 3 lowered oxygen cost by 5.4 ml O2/kg/km versus the Cloudrunner 2, the Saucony Endorphin Pro 3 reduced 60-minute oxygen drift (0.00056 versus 0.00088 mL/kg/min), and each 4 ms drop in contact time at 15.0 km/h linked to a 1% economy gain, though a 2023 study found individual responses ranging from an 11.3% drawback to an 11.4% benefit in Kenyan elites and a 9.7% benefit to a 1.1% drawback in European amateurs.

How Product.ai knows this9

In a 2018 Sports Medicine study, Hoogkamer, Kram and Arellano found that compared with the existing racing shoes (NS and AB), the new NP shoes reduced the energetic cost of running in all 18 subjects tested; averaged across three velocities and with shoe mass matched, running in the NP shoes (16.45 ± 0.89 W/kg) cost 4.16% less than in the NS shoes and 4.01% less than in the AB shoes. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Independent crossover metabolic trials showing the NP shoes did not reduce energetic cost relative to the NS and AB racing shoes.

A 2026 BMC Sports Science, Medicine and Rehabilitation systematic review found that carbon-fibre plate shoes with resilient midsole foams improved running economy by 2.6 to 4.2%, with some models improving running economy during prolonged running by 2 to 6%. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled metabolic trials showing carbon-fibre plate shoes with resilient midsole foams improve running economy by less than 2.6%.

In a 2019 Sports Medicine study, Hoogkamer, Kipp and Kram reported that substantial mechanical energy was stored and returned in compressing the midsole foam of the NP shoes but not in bending the carbon-fiber plate, and concluded that the metabolic savings of those shoes appear to be due to superior energy storage in the midsole foam, lever effects of the plate on ankle mechanics, and stiffening effects of the plate on the metatarsophalangeal (MTP, ball-of-foot) joint. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Mechanical and joint-force measurements showing that bending the carbon-fiber plate stores and returns more energy than compressing the midsole foam in the shoes studied.

In a 2021 Journal of Sport and Health Science study, Healey and Hoogkamer found that cutting the carbon-fiber plate and reducing longitudinal bending stiffness (how much the shoe resists bending along its length) in the Nike Vaporfly 4% did not significantly change running economy (the energy cost of running at a set speed), which was on average 0.55% ± 1.77% worse in the cut-plate condition compared with intact (95% CI -1.44% to 0.40%). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Metabolic testing of the Nike Vaporfly 4% showing that cutting the carbon-fiber plate significantly worsens running economy.

In a 2025 Frontiers in Sports and Active Living biomechanics study testing shoes with low (0.31 Nm/deg), medium (0.40 Nm/deg), and high (0.48 Nm/deg) longitudinal bending stiffness (LBS, how much the shoe resists bending along its length), negative work (energy absorbed) at the metatarsophalangeal (MTP, ball-of-foot) joints was significantly higher in the low-stiffness shoes than in the high-stiffness shoes (0.21 ± 0.05 versus 0.13 ± 0.05 J/kg, p = 0.001). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Joint-force calculations showing that negative work at the MTP joints is equal or lower in low-stiffness shoes than in high-stiffness shoes.

In a 2026 Sports Medicine - Open crossover study of 14 moderately-trained runners at 7.5, 9.0, 10.5, and 12.0 km/h, oxygen cost (the oxygen used per kilogram of body weight per kilometer) combined across all tested speeds was 5.4 ml O2/kg/km lower in the On Cloudboom Echo 3, an advanced footwear technology (AFT) shoe, than in the traditional On Cloudrunner 2 (95% CI, 3.9 to 6.9 lower; p < 0.001). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing at several speeds showing no oxygen cost difference between the On Cloudboom Echo 3 and the On Cloudrunner 2.

In a 2025 International Journal of Sports Physiology and Performance randomized crossover study of 15 trained distance runners completing two 60-minute treadmill runs at about 75% of critical speed, oxygen uptake drift (the slow rise in oxygen use over a run) was significantly lower in the Saucony Endorphin Pro 3, an advanced footwear technology (AFT) shoe, than in the Saucony Kinvara control shoe (0.00056 versus 0.00088 mL/kg/min; P = .018), and postrun vertical impulse decreased by only 0.2% in the AFT versus 4.9% in control (P = .016). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Extended 60-minute metabolic trials showing no difference in oxygen uptake drift or postrun vertical impulse between the Saucony Endorphin Pro 3 and the Saucony Kinvara.

In a 2026 Sports Medicine - Open crossover trial of 22 trained long-distance runners (50% female) running multiple 5-minute bouts at their season's best marathon pace (15.0 ± 2.3 km/h) in the Asics Metaspeed Sky+, Nike Air Zoom Alphafly Next% 2, and Puma Fast-R Nitro Elite v1, shorter ground contact time was significantly associated with lower energetic cost of transport (the energy used to cover a distance; p = 0.002), reflecting a ~1% improvement in running economy per 4 ms decrease. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing across advanced footwear models at marathon pace showing that shorter ground contact time is associated with higher or unchanged energetic cost of transport.

In a 2023 Sports Medicine study, Knopp and colleagues found large individual variability in running economy with advanced footwear technology compared with a flat racing shoe: world-class Kenyan road runners ranged from an 11.3% drawback to an 11.4% benefit, and amateur Europeans from a 9.7% benefit to a 1.1% drawback, while a post-hoc meta-analysis found an overall significant medium benefit compared with traditional flats. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Metabolic testing across runners showing every runner has the same running-economy response to advanced footwear technology.

Sizing, width & heel drop

How do you match shoe width, heel-to-toe drop, and cushioning to your stride?

Start with width and foot volume, pick a heel-to-toe drop that matches your weekly mileage, and separate race-day PEBA shoes from daily trainers:

  1. Have you matched both length and width after your feet warm up?

    A 2019 study of foot scans in 5 mm increments found that at least 3 widths per length class are needed to fit 90% of shoppers, and a 2008 study measured a 1.4% increase in foot volume (742.39 ml to 753.03 ml) after just 10 minutes of treadmill walking.

  2. What heel-to-toe drop matches your training load?

    In a 2019 study comparing 0, 6, and 10 mm drops in 15 female runners, 0 mm shoes produced significantly higher ankle braking forces than 6 mm and 10 mm shoes, with no difference between 6 and 10 mm.

  3. Do you need a comfortable daily trainer or a race-day super-shoe?

    In a 2024 study, PEBA super-shoes beat EVA shoes in running economy when new (14.87 versus 15.15 W/kg), but after 450 km of wear PEBA rose to 15.21 W/kg and matched EVA at 15.13 W/kg.

  4. Does the shoe feel natural on a test run without forced arch correction?

    Clinical reviews in 2015 and 2022 found limited evidence for pronation control and recommended choosing lightweight, comfortable shoes that let you stay in your preferred movement path.

How Product.ai knows this7

In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

A multi-region foot measurement dataset showing that a single standard width per length class accommodates at least 90% of customers across regions and sexes.

In a 2010 Research in Sports Medicine study, Krauss and colleagues found that the width differences between shoe lasts (the foot-shaped molds shoes are built on) and foot types varied from 0 to 9 mm. Length scaling across sizes was similar for lasts and feet (differences under 1 mm), but width scaling was larger in lasts than in feet (3.5 to 5.9 mm). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Measurements of shoe lasts and feet across sizes showing that width differences between lasts and foot types stay within 1 mm and that last width scaling per size matches foot width scaling.

In a 2008 North American Journal of Sports Physical Therapy study, McWhorter and colleagues measured a statistically significant 1.4% increase in mean foot volume (742.39 ml before, 753.03 ml after) following 10 minutes of weight-bearing treadmill walking. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Volume measurements of the foot before and after 10 minutes of weight-bearing treadmill walking showing no change in foot volume.

In a 2019 European Journal of Sport Science study of 15 healthy female runners at their preferred speed in shoes with 0, 6, and 10 mm of drop (the height difference between heel and forefoot), Besson and colleagues found significantly higher ankle dorsiflexion moments (the turning force pulling the toes toward the shin) during the braking phase in the 0 mm shoes than in the 6 and 10 mm shoes, with no difference between 6 and 10 mm. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Three-dimensional inverse dynamics showing equal or lower braking-phase ankle dorsiflexion moments in 0 mm shoes than in 6 and 10 mm shoes at preferred running speed.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues found a clear running economy (RE) advantage for new polyether block amide (PEBA) versus ethylene-vinyl acetate (EVA) advanced footwear (14.87 ± 0.99 versus 15.15 ± 1.13 W/kg), but after 450 km of use PEBA energy cost rose significantly to 15.21 ± 1.01 W/kg while EVA remained unchanged at 15.13 ± 1.14 W/kg, leaving both shoes with similar running economy. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic trials at 450 km showing worn PEBA midsoles retain their full fresh running-economy advantage over worn EVA midsoles.

In a 2015 British Journal of Sports Medicine review, Nigg and colleagues noted the lack of conclusive evidence for two variables once thought to be the prime predictors of running injuries, and suggested two new paradigms, the preferred movement path and the comfort filter, in which a runner intuitively selects a comfortable product that lets them stay in their preferred movement path. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials showing conclusive evidence that the two variables once thought to be the prime predictors of running injuries do predict them.

In a 2022 Frontiers in Sports and Active Living clinical review of four paradigms (Pronation Control, Impact Force Modification, Habitual Joint Motion Path, and Comfort Filter), Agresta and colleagues found that evidence in support of any paradigm is generally limited and, in the absence of a clearly supported paradigm, proposed that in general clinicians should recommend footwear that is lightweight, comfortable, and has minimal pronation control technology (features that limit the inward roll of the foot). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Randomized clinical trials showing clear evidence that any one of the four paradigms, such as pronation control, reduces injury in recreational runners.

What heel-to-toe drop should you choose, and what happens with zero-drop shoes?

Standard 6 mm to 10 mm drops load the ankle similarly, while 0 mm drop and minimalist shoes shift force to the ankle, Achilles tendon, and calf and require a slow transition for regular runners:

In a 2019 study of 15 healthy female runners in 0, 6, and 10 mm drop shoes, ankle braking moments were significantly higher in the 0 mm shoes than in the 6 and 10 mm shoes, with no difference between 6 and 10 mm.

In a 2016 randomized trial of 553 runners over 6 months across 10 mm, 6 mm, and 0 mm drops, low-drop shoes (6 mm and 0 mm) lowered injury risk in occasional runners (hazard ratio 0.48, 95% CI 0.23 to 0.98) but raised injury risk in regular runners (hazard ratio 1.67, 95% CI 1.07 to 2.62), and a 2026 meta-analysis found that transitioning to minimalist shoes raised injury risk (effect size 3.529) unless paired with at least 12 weeks of supervised retraining.

A 1998 study showed runners adjust leg stiffness to match surface stiffness, a 2010 Nature study showed forefoot striking lowers collision forces via ankle compliance, and a 2026 scoping review of eight brands found no consistent measurable definition for rocker sole geometry.

How Product.ai knows this6

In a 2019 European Journal of Sport Science study of 15 healthy female runners at their preferred speed in shoes with 0, 6, and 10 mm of drop (the height difference between heel and forefoot), Besson and colleagues found significantly higher ankle dorsiflexion moments (the turning force pulling the toes toward the shin) during the braking phase in the 0 mm shoes than in the 6 and 10 mm shoes, with no difference between 6 and 10 mm. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Three-dimensional inverse dynamics showing equal or lower braking-phase ankle dorsiflexion moments in 0 mm shoes than in 6 and 10 mm shoes at preferred running speed.

In a 2016 American Journal of Sports Medicine study of 553 leisure-time runners observed for 6 months after receiving shoes with a heel-to-toe drop of 10 mm, 6 mm, or 0 mm, Malisoux and colleagues found that low-drop shoes (6 mm and 0 mm) were associated with lower injury risk in occasional runners (hazard ratio, HR, 0.48; 95% confidence interval, CI, 0.23 to 0.98) but higher injury risk in regular runners (HR 1.67; 95% CI 1.07 to 2.62). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Six-month injury data from leisure-time runners showing low-drop shoes (6 mm or 0 mm) are not associated with lower injury risk in occasional runners, or are associated with equal or lower injury risk in regular runners.

A 2026 Gait and Posture meta-analysis found that transitioning to minimalist footwear was associated with a moderate increase in injury risk (overall effect size, a standardized measure of the difference, 3.529; 95% CI 2.41 to 4.646), most frequently bone marrow edema (swelling inside the bone) in the metatarsal region, Achilles tendinopathy (tendon pain above the heel), and calf pain, related to adopting a forefoot strike pattern, and noted that supervised retraining programs of at least 12 weeks may support progressive adaptation of the musculoskeletal system and reduce injury risk. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials of runners transitioning to minimalist footwear showing no increase in injury risk, or no link between the transition and metatarsal bone marrow edema, Achilles tendinopathy, or calf pain.

In a 1998 Proceedings of the Royal Society B study, Ferris, Louie and Farley found that human runners adjust their leg stiffness to match changes in surface stiffness, which lets them keep similar running mechanics on different surfaces. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-plate and motion measurements of humans running on surfaces of different stiffness showing constant leg stiffness together with markedly different running mechanics on each surface.

In a 2010 Nature study, Lieberman and colleagues showed that on hard surfaces, barefoot runners who land on the forefoot generate smaller collision forces than shod (shoe-wearing) rearfoot strikers, primarily because they land with a more plantarflexed foot (toes pointed down) and more ankle compliance, which lowers the effective mass of the body that collides with the ground. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Impact force measurements on hard surfaces showing that barefoot forefoot strikers generate equal or larger collision forces than shod rearfoot strikers.

A 2026 Journal of Foot and Ankle Research scoping review of academic sources and commercial materials from eight leading footwear brands found that academic sources used diverse terminology with no consistent definition or threshold for what counts as a rocker (a curved sole shape), and that commercial descriptions relied on qualitative brand-specific language lacking measurable parameters. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Standardized quantitative disclosures across major footwear brands specifying exact rocker apex percentages, curvature radii, and rocker angles per model.

How should running shoes fit, and why do width and women's lasts matter?

Standard single-width shoes miss a large share of feet because width scaling on shoe molds diverges from real feet, men and women differ in foot proportions at the same length, and feet swell within minutes of exercise:

In a 2010 study, width differences between shoe lasts (the molds shoes are built on) and real foot types ranged from 0 to 9 mm, and while length scaling across sizes matched within 1 mm, width scaling was larger in lasts than in feet (3.5 to 5.9 mm).

A 2019 Scientific Reports study classifying foot scans into 5 mm length increments found that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers, and that shoes should be developed separately by region and sex.

In a 2001 anthropometry study normalizing measurements by foot length, men and women differed significantly across two calf, five ankle, and four foot shape variables (classifying sex 85% of the time), and a 2008 study found a 1.4% increase in foot volume (742.39 to 753.03 ml) after 10 minutes of treadmill walking.

How Product.ai knows this8

In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

A multi-region foot measurement dataset showing that a single standard width per length class accommodates at least 90% of customers across regions and sexes.

In a 2010 Research in Sports Medicine study, Krauss and colleagues found that the width differences between shoe lasts (the foot-shaped molds shoes are built on) and foot types varied from 0 to 9 mm. Length scaling across sizes was similar for lasts and feet (differences under 1 mm), but width scaling was larger in lasts than in feet (3.5 to 5.9 mm). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Measurements of shoe lasts and feet across sizes showing that width differences between lasts and foot types stay within 1 mm and that last width scaling per size matches foot width scaling.

In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width per class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Population foot scan distributions showing that 90% of customers within a 5mm foot-length class are properly accommodated by a single standard shoe width size.

In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, that a shoe designed for a single group fits a different segment of the population in another group, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Foot scan data showing that fewer than 3 shoe widths per length class still provide a proper fit for 90% of customers, or that a shoe designed for one group fits the same segment of the population in another group.

In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width for each length class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Foot scan datasets showing that a single medium shoe width accommodates over 90% of customers across all 5mm length classes.

In a 2019 Scientific Reports study, Jurca and colleagues reported statistically significant differences in mean foot measurements across regions and sexes along with large dispersion within each customer group, concluding that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Population 3D foot scan studies showing that a single shoe width fits at least 90% of customers within a length class.

In a 2001 Medicine and Science in Sports and Exercise anthropometry (body measurement) study, Wunderlich and Cavanagh found that after normalizing measurements by foot length, men and women differed significantly in two calf, five ankle, and four foot shape variables, and sex was correctly classified 85% of the time from the standardized variables. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Body measurements normalized by foot length showing no significant differences between men and women in calf, ankle, and foot shape, with sex classified correctly only about half the time.

In a 2008 North American Journal of Sports Physical Therapy study, McWhorter and colleagues measured a statistically significant 1.4% increase in mean foot volume (742.39 ml before, 753.03 ml after) following 10 minutes of weight-bearing treadmill walking. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Volume measurements of the foot before and after 10 minutes of weight-bearing treadmill walking showing no change in foot volume.

How do running speed and shoe cushioning change impact forces on your legs?

Running faster drives peak vertical ground force from 2.0 up to 2.9 body weights, while skin touch receptors on the sole and bone remodeling respond directly to mechanical load:

In a 1989 force-platform study of 12 healthy men, increasing running speed from 1.5 to 6.0 m/s shortened ground contact periods and raised peak vertical ground reaction force from approximately 2.0 to 2.9 body weights, and a 2000 study of 33 runners (top speeds 6.2 to 11.1 m/s) found that leg swing time did not vary (P = 0.18) while average ground force at 11.1 m/s was 1.26 times greater than at 6.2 m/s.

In a 2002 microneurography study of 104 touch receptors in the human foot sole, 57% (59 units) were fast-adapting type I, 14% (14 units) were fast-adapting type II, 14% (15 units) were slow-adapting type I, and 15% (16 units) were slow-adapting type II.

A 2003 update in The Anatomical Record Part A described how load-bearing bones adapt their strength to voluntary mechanical loads after birth to minimize nontraumatic fractures and maintain a bone-strength safety factor.

How Product.ai knows this4

In a 1989 Acta Physiologica Scandinavica study of 12 healthy men on a force platform (a floor sensor that measures each footstep), Nilsson and Thorstensson showed that as running speed increased from 1.5 to 6.0 m/s the force periods got shorter and the peak vertical ground reaction force (the peak upward push from the ground) rose from approximately 2.0 to 2.9 body weights. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Force-platform measurements of runners across 1.5 to 6.0 m/s showing constant force-period duration or falling peak vertical ground reaction force as speed increases.

In a 2000 Journal of Applied Physiology study of 33 runners whose top speeds on a level treadmill ranged from 6.2 to 11.1 m/s, Weyand and colleagues found that the time taken to swing the leg forward for the next step did not vary with top speed (P = 0.18), while the average force applied to the ground relative to body weight was 1.26 times greater for a runner with a top speed of 11.1 m/s than for one with 6.2 m/s. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Treadmill force-plate data showing that faster top speeds come mainly from shorter leg swing times rather than from greater average ground force relative to body weight.

In a 2002 Journal of Physiology study using microneurography (recording electrical activity from single nerve fibers) on 104 touch receptors in the skin of the human foot sole, Kennedy and Inglis found that 57% (59 units) were fast-adapting type I, 14% (14 units) were fast-adapting type II, 14% (15 units) were slow-adapting type I, and 15% (16 units) were slow-adapting type II. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Microneurography recordings of touch receptors in human foot-sole skin showing more slow-adapting than fast-adapting units.

In a 2003 update in The Anatomical Record Part A, Frost described how load-bearing bones in free-living vertebrates adapt their strength to the mechanical loads on them, with voluntary mechanical usage determining most of the strength of healthy bones after birth in ways that minimize nontraumatic fractures and create a bone-strength safety factor. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Studies of load-bearing bone in vertebrates after birth showing that bone strength does not change in response to the mechanical loads placed on the bone.

Foam breakdown & replacement miles

How fast do race foams and daily midsoles lose energy return and shock absorption?

A wrong pick or worn-out midsole costs you either lost race-day energy return after 450 km, doubled underfoot pressure by 500 km, or an injury spike from switching to zero-drop too fast:

Nike (PEBA super-shoes)

Fresh economy or biomechanics

New PEBA advanced footwear reduced running energy cost to 14.87 W/kg versus 15.15 W/kg in EVA shoes at 13 km/h.

450 to 660 km wear or transition cost

After 450 km of wear, PEBA energy cost rose by 0.32 W/kg to 15.21 W/kg while EVA stayed at 15.13 W/kg, erasing the super-shoe economy edge.

New Balance (PEBA vs. EVA)

Fresh economy or biomechanics

Incorporating PEBA rather than EVA in advanced footwear gives a clear running economy advantage when models are new.

450 to 660 km wear or transition cost

After 450 km of use, worn PEBA and worn EVA shoes deliver similar running economy.

Altra (0 mm and 6 mm drop)

Fresh economy or biomechanics

In a 6-month trial of 553 runners, low-drop shoes (6 mm and 0 mm) lowered injury risk in occasional runners (hazard ratio 0.48).

450 to 660 km wear or transition cost

Low-drop shoes raised 6-month injury risk in regular runners (hazard ratio 1.67), and minimalist transitions raised injury risk (effect size 3.529) without a 12-week retraining plan.

Midsole foam (500 to 750 km)

Fresh economy or biomechanics

Shoes retain about 75% of initial shock absorption at 50 miles and 67% at 100 to 150 miles.

450 to 660 km wear or transition cost

Peak underfoot pressure increased by 100% after 500 km (with microscopic foam holes by 750 km), shock absorption fell under 60% by 250 to 500 miles, and heel stiffness rose from 127 to 154 N/mm after 660 km while energy dissipation fell from 2.19 to 1.88 J.

How Product.ai knows this10

In a 2024 Scandinavian Journal of Medicine and Science in Sports randomized crossover study across four 4-minute trials at 13 km/h, Rodrigo-Carranza and colleagues found that energy cost in polyether block amide (PEBA) advanced footwear increased significantly after 450 km of wear compared with new (15.21 ± 1.01 versus 14.87 ± 0.99 W/kg, p < 0.05), whereas ethylene-vinyl acetate (EVA) shoes showed no significant difference between worn and new (15.13 ± 1.14 versus 15.15 ± 1.13 W/kg). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic testing showing no significant increase in energy cost in PEBA advanced footwear after 450 km of wear, or a significant increase in EVA advanced footwear after 450 km of wear.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues concluded that incorporating polyether block amide (PEBA) rather than ethylene-vinyl acetate (EVA) in advanced footwear technology (AFT, shoes shown to improve running economy) gives a clear running economy (RE) advantage when the models are new, but after 450 km of use the PEBA and EVA shoes have similar running economy. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Controlled metabolic testing showing no running economy difference between new PEBA and new EVA advanced footwear, or a PEBA advantage that persists after 450 km of use.

In a 2016 American Journal of Sports Medicine study of 553 leisure-time runners observed for 6 months after receiving shoes with a heel-to-toe drop of 10 mm, 6 mm, or 0 mm, Malisoux and colleagues found that low-drop shoes (6 mm and 0 mm) were associated with lower injury risk in occasional runners (hazard ratio, HR, 0.48; 95% confidence interval, CI, 0.23 to 0.98) but higher injury risk in regular runners (HR 1.67; 95% CI 1.07 to 2.62). source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Six-month injury data from leisure-time runners showing low-drop shoes (6 mm or 0 mm) are not associated with lower injury risk in occasional runners, or are associated with equal or lower injury risk in regular runners.

A 2026 Gait and Posture meta-analysis found that transitioning to minimalist footwear was associated with a moderate increase in injury risk (overall effect size, a standardized measure of the difference, 3.529; 95% CI 2.41 to 4.646), most frequently bone marrow edema (swelling inside the bone) in the metatarsal region, Achilles tendinopathy (tendon pain above the heel), and calf pain, related to adopting a forefoot strike pattern, and noted that supervised retraining programs of at least 12 weeks may support progressive adaptation of the musculoskeletal system and reduce injury risk. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Prospective trials of runners transitioning to minimalist footwear showing no increase in injury risk, or no link between the transition and metatarsal bone marrow edema, Achilles tendinopathy, or calf pain.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues found a clear running economy (RE) advantage for new polyether block amide (PEBA) versus ethylene-vinyl acetate (EVA) advanced footwear (14.87 ± 0.99 versus 15.15 ± 1.13 W/kg), but after 450 km of use PEBA energy cost rose significantly to 15.21 ± 1.01 W/kg while EVA remained unchanged at 15.13 ± 1.14 W/kg, leaving both shoes with similar running economy. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic trials at 450 km showing worn PEBA midsoles retain their full fresh running-economy advantage over worn EVA midsoles.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues showed that the increase in running energy cost between new and 450 km worn shoes was significantly higher for polyether block amide (PEBA) shoes (0.32 ± 0.38 W/kg) than for ethylene-vinyl acetate (EVA) shoes (0.06 ± 0.58 W/kg, p < 0.01), leaving PEBA and EVA advanced footwear with similar running economy after 450 km. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Longitudinal metabolic measurements showing PEBA midsoles experience smaller or equal energy-cost degradation compared with EVA midsoles over 450 km.

In a 2004 Journal of Biomechanics study, Verdejo and Mills found that peak plantar pressure (the highest pressure under the foot) increased on average by 100% after a 500 km run, and that scanning electron microscopy (high-magnification imaging) showed structural damage in the foam, with wrinkling of faces and some holes, after a 750 km run. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Plantar pressure and scanning electron microscopy measurements showing unchanged peak plantar pressure and no structural damage in the foam after 500 to 750 km of running.

In a 1985 American Journal of Sports Medicine mechanical aging study, Cook, Kester and Brunet found that in general the shoes retained approximately 75% of their initial shock absorption after 50 miles of simulated running, approximately 67% after 100 to 150 miles, and less than 60% between 250 and 500 miles. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Mechanical testing of simulated running showing shoes retain over 90% of initial shock absorption capacity between 250 and 500 miles.

In a 2014 Journal of Sports Sciences mechanical aging study, Chambon and colleagues aged the heel area of a running shoe at realistic frequencies and impact magnitudes based on a 660 km training plan, and found that on average heel stiffness rose from 127 to 154 N/mm and energy dissipation (viscosity, the impact energy the shoe soaks up) fell from 2.19 to 1.88 J. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Mechanical impact testing of the shoe heel area after a simulated 660 km training plan showing that heel stiffness falls or stays unchanged.

A 2026 ChemSusChem study of enzymatic breakdown of polyurethanes (PURs) reported that docking studies (computer models of how an enzyme binds its target) highlighted the specificity of the enzyme HiC toward ester bonds in the polymer units, and that two HiC variants further enhanced degradation within 24 hours. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Docking or degradation assays showing HiC has no specificity for ester bonds in polyurethane, or that the two HiC variants do not enhance degradation within 24 hours.

How long do running shoes last before the midsole foam wears out?

Polyether block amide (PEBA) super-shoes lose their running economy advantage over ethylene-vinyl acetate (EVA) by 450 km, and standard foam midsoles double peak underfoot pressure by 500 km:

Increase in running energy cost after 450 km of wear

Increase in running energy cost after 450 km

PEBA shoesrising from 14.87 to 15.21 W/kg
0.32 W/kg
EVA shoesmoving from 15.15 to 15.13 W/kg
0.06 W/kg
0 W/kg0.4 W/kg

In a 2024 study comparing new and 450 km worn shoes, running energy cost rose by 0.32 W/kg in PEBA shoes (from 14.87 to 15.21 W/kg) compared with 0.06 W/kg in EVA shoes, leaving both foams with similar running economy after 450 km.

Source check on Nov 2, 2026 · 2024 study of new and 450 km worn shoes

In a 2024 study, the increase in running energy cost between new and 450 km worn shoes was significantly higher for PEBA shoes (0.32 W/kg, rising from 14.87 to 15.21 W/kg) than for EVA shoes (0.06 W/kg, moving from 15.15 to 15.13 W/kg), leaving PEBA and EVA with similar running economy after 450 km.

In a 2004 biomechanics study, peak plantar pressure under the foot increased by 100% after a 500 km run and scanning electron microscopy showed wrinkled cell faces and holes after 750 km, while a 2014 study based on a 660 km training plan found heel stiffness rose from 127 to 154 N/mm and energy dissipation dropped from 2.19 to 1.88 J.

In a 1985 mechanical aging study, shoes kept about 75% of their initial shock absorption after 50 miles, 67% after 100 to 150 miles, and less than 60% between 250 and 500 miles, while a 2026 ChemSusChem study showed that ester bonds in polyurethane polymers are vulnerable to enzymatic cleavage within 24 hours.

How Product.ai knows this6

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues found a clear running economy (RE) advantage for new polyether block amide (PEBA) versus ethylene-vinyl acetate (EVA) advanced footwear (14.87 ± 0.99 versus 15.15 ± 1.13 W/kg), but after 450 km of use PEBA energy cost rose significantly to 15.21 ± 1.01 W/kg while EVA remained unchanged at 15.13 ± 1.14 W/kg, leaving both shoes with similar running economy. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Crossover metabolic trials at 450 km showing worn PEBA midsoles retain their full fresh running-economy advantage over worn EVA midsoles.

In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues showed that the increase in running energy cost between new and 450 km worn shoes was significantly higher for polyether block amide (PEBA) shoes (0.32 ± 0.38 W/kg) than for ethylene-vinyl acetate (EVA) shoes (0.06 ± 0.58 W/kg, p < 0.01), leaving PEBA and EVA advanced footwear with similar running economy after 450 km. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Longitudinal metabolic measurements showing PEBA midsoles experience smaller or equal energy-cost degradation compared with EVA midsoles over 450 km.

In a 2004 Journal of Biomechanics study, Verdejo and Mills found that peak plantar pressure (the highest pressure under the foot) increased on average by 100% after a 500 km run, and that scanning electron microscopy (high-magnification imaging) showed structural damage in the foam, with wrinkling of faces and some holes, after a 750 km run. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Plantar pressure and scanning electron microscopy measurements showing unchanged peak plantar pressure and no structural damage in the foam after 500 to 750 km of running.

In a 1985 American Journal of Sports Medicine mechanical aging study, Cook, Kester and Brunet found that in general the shoes retained approximately 75% of their initial shock absorption after 50 miles of simulated running, approximately 67% after 100 to 150 miles, and less than 60% between 250 and 500 miles. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Mechanical testing of simulated running showing shoes retain over 90% of initial shock absorption capacity between 250 and 500 miles.

In a 2014 Journal of Sports Sciences mechanical aging study, Chambon and colleagues aged the heel area of a running shoe at realistic frequencies and impact magnitudes based on a 660 km training plan, and found that on average heel stiffness rose from 127 to 154 N/mm and energy dissipation (viscosity, the impact energy the shoe soaks up) fell from 2.19 to 1.88 J. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Mechanical impact testing of the shoe heel area after a simulated 660 km training plan showing that heel stiffness falls or stays unchanged.

A 2026 ChemSusChem study of enzymatic breakdown of polyurethanes (PURs) reported that docking studies (computer models of how an enzyme binds its target) highlighted the specificity of the enzyme HiC toward ester bonds in the polymer units, and that two HiC variants further enhanced degradation within 24 hours. source

Checked by Product.ai on 2026-11-02

What would prove this wrong

Docking or degradation assays showing HiC has no specificity for ester bonds in polyurethane, or that the two HiC variants do not enhance degradation within 24 hours.

Questions coming soon

Shoppers ask these questions too, and they are in the Product.ai research queue for source checking, so this page does not answer them yet.

  • What are the best trail running shoes for mud, rock, and wet grip?
  • What are the best waterproof Gore-Tex running shoes for winter and rain?
  • What are the best running shoes for flat feet or plantar fasciitis?
  • What are the best treadmill and gym running shoes?
  • What are the best track spikes and cross-country racing shoes?
  • Can you wash running shoes in a washing machine without damaging the foam?
  • Does rotating two pairs of running shoes make them last longer?
  • When should you replace running shoes based on outsole rubber wear?

How this page knows

How findings on this page were made and checked

Product.ai builds each guide from a verified product database. Powered by the Axioms.ai Verification Engine, it turns a category into small, testable findings. The aim is that each finding rests on a primary source, which is the party that issued the fact, and carries a falsifier, which is the result that would prove the finding wrong so a reader can test it. Each page says how far it meets that aim. Powered by Axioms.ai: read how findings are checked

  1. 1

    Primary-source evidence

    The aim is that each finding rests on a primary source, which is the party that issued the fact. Each page says how far it meets that aim.

    Sources include clinical trials, biomechanics lab studies, ASTM and SATRA material tests, and shoe brand specifications.
  2. 2

    Source check

    When a source check runs, it traces each finding's numbers and mechanism to its cited source. Partial findings show only the part the source supports.

    Product.ai checked the 34 findings on this page against their sources on November 2, 2026, and 34 passed the source check.
  3. 3

    Falsifier and open gaps

    Findings carry the result that would prove them wrong so a reader can test them. Questions the record cannot answer are listed as not yet answered instead of guessed.

    All 34 findings name what would prove them wrong, and 8 questions shoppers ask are not yet answered on this page.
Last source check
November 2, 2026
Open questions and brands
8 questions not yet answered
Links and payment
This page has no affiliate links.
Every claim on this page cites its source and the date it was checked, and names what would change the finding.

Numbered sources

  1. 1Sports Medicine (Hoogkamer, Kram and Arellano, 2018) and Journal of Sport and Health Science (Healey and Hoogkamer, 2021) (checked Nov 2, 2026): Nike Vaporfly 4% prototype shoes reduced the energetic cost of running by 4.16% against Nike Streak racing flats and 4.01% against Adidas Adios Boost 2 across all 18 runners tested.
  2. 2Scandinavian Journal of Medicine and Science in Sports (Rodrigo-Carranza and colleagues, 2024) (checked Nov 2, 2026): polyether block amide (PEBA) super-shoes beat ethylene-vinyl acetate (EVA) when new (14.87 vs 15.15 W/kg), but after 450 km PEBA energy cost rose to 15.21 W/kg while EVA stayed at 15.13 W/kg, leaving both foams with similar running economy.
  3. 3Scientific Reports (Jurca and colleagues, 2019), British Journal of Sports Medicine (Nigg and colleagues, 2015), and Frontiers in Sports and Active Living (Agresta and colleagues, 2022) (checked Nov 2, 2026): at least 3 shoe widths per length class are needed to fit 90% of runners, and clinical reviews recommend lightweight, comfortable shoes with minimal pronation control.
  4. 4The American Journal of Sports Medicine (Malisoux and colleagues, 2016) and European Journal of Sport Science (Besson and colleagues, 2019) (checked Nov 2, 2026): in a 6-month trial of 553 runners across 10 mm, 6 mm, and 0 mm drop shoes, low-drop (6 mm and 0 mm) reduced injury risk in occasional runners (HR 0.48) but raised it in regular runners (HR 1.67), and 0 mm shoes produced higher ankle braking forces than 6 mm and 10 mm shoes.

Method notes from this page

Every claim on this page cites its source and the date it was checked, and names what would change the finding.

Where a common shopper question is still in the research queue for source checking, it is listed below as coming soon rather than guessed.

Sources & check record

43 checked readings behind this page, each a dated passage from a cited source

Source check on Nov 2, 2026 · Zero affiliate links

Sources & check record

Sources & check record

43 checked readings behind this page, sourced and dated

Each row is one checked reading with its source link, quote, who checked it and when, its falsifier, and the parts of this page that cite it.

ReadingSourceQuoteCheck recordWhat would prove this wrongResearch areaCited in
In a 2018 Sports Medicine study, Hoogkamer, Kram and Arellano found that compared with the existing racing shoes (NS and AB), the new NP shoes reduced the energetic cost of running in all 18 subjects tested; averaged across three velocities and with shoe mass matched, running in the NP shoes (16.45 ± 0.89 W/kg) cost 4.16% less than in the NS shoes and 4.01% less than in the AB shoes.Sports Medicine (Hoogkamer, Kram and Arellano) (2018)“Compared with the established racing shoes, the new shoes reduced the energetic cost of running in all 18 subjects tested. Averaged across all three velocities, the energetic cost for running in the NP shoes (16.45 ± 0.89 W/kg; mean ± SD) was 4.16 and 4.01% lower than in the NS and AB shoes, when shoe mass was matched (17.16 ± 0.92 and 17.14 ± 0.97 W/kg, respectively, both p < 0.001).”Checked by Product.ai on 2026-11-02Independent crossover metabolic trials showing the NP shoes did not reduce energetic cost relative to the NS and AB racing shoes.Research area Nike PEBA racing foam and running economyCited in The category answer, Major running shoe brands, Carbon-plated super-shoes
In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.Scientific Reports (Jurca and colleagues) (2019-12-16)“Therefore, shoes should be developed separately for each group, region, and sex, and at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.”Checked by Product.ai on 2026-11-02A multi-region foot measurement dataset showing that a single standard width per length class accommodates at least 90% of customers across regions and sexes.Research area Foot shape, width, and shoe fitCited in Run type & weekly mileage, Sizing, width & heel drop, How should running shoes fit, and why do width and women's lasts matter?
In a 2010 Research in Sports Medicine study, Krauss and colleagues found that the width differences between shoe lasts (the foot-shaped molds shoes are built on) and foot types varied from 0 to 9 mm. Length scaling across sizes was similar for lasts and feet (differences under 1 mm), but width scaling was larger in lasts than in feet (3.5 to 5.9 mm).Research in Sports Medicine (Krauss and colleagues) (2010)“Differences in width measures between lasts and foot types vary substantially (0-9 mm). Length grading is similar for lasts and feet (differences < 1mm). Width grading is larger in lasts in comparison with average grading in feet (3.5-5.9 mm).”Checked by Product.ai on 2026-11-02Measurements of shoe lasts and feet across sizes showing that width differences between lasts and foot types stay within 1 mm and that last width scaling per size matches foot width scaling.Research area Foot shape, width, and shoe fitCited in Run type & weekly mileage, Sizing, width & heel drop, How should running shoes fit, and why do width and women's lasts matter?
In a 2001 Medicine and Science in Sports and Exercise anthropometry (body measurement) study, Wunderlich and Cavanagh found that after normalizing measurements by foot length, men and women differed significantly in two calf, five ankle, and four foot shape variables, and sex was correctly classified 85% of the time from the standardized variables.Medicine and Science in Sports and Exercise (Wunderlich and Cavanagh) (2001)“After normalization of the measurements by foot length, men and women were found to differ significantly in two calf, five ankle, and four foot shape variables. Using the variables standardized to foot length, gender was correctly classified 85% of the time.”Checked by Product.ai on 2026-11-02Body measurements normalized by foot length showing no significant differences between men and women in calf, ankle, and foot shape, with sex classified correctly only about half the time.Research area Male and female foot shape differencesCited in Run type & weekly mileage, How should running shoes fit, and why do width and women's lasts matter?
In a 2008 North American Journal of Sports Physical Therapy study, McWhorter and colleagues measured a statistically significant 1.4% increase in mean foot volume (742.39 ml before, 753.03 ml after) following 10 minutes of weight-bearing treadmill walking.North American Journal of Sports Physical Therapy (McWhorter and colleagues) (2008-02-01)“A statistically significant difference in foot volume was found between pre (mean = 742.39ml, 95% CI: 685.23 - 799.55) and post (mean = 753.03ml, 95% CI: 697.51ml - 808.55ml) measurements for the treadmill (weight bearing) protocol. This study demonstrated a 1.4% increase in foot volume after 10 minutes of treadmill walking.”Checked by Product.ai on 2026-11-02Volume measurements of the foot before and after 10 minutes of weight-bearing treadmill walking showing no change in foot volume.Research area Foot swelling during exerciseCited in Run type & weekly mileage, Sizing, width & heel drop, How should running shoes fit, and why do width and women's lasts matter?
In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width per class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.Scientific Reports (Jurca and colleagues) (2019-12-16)“Foot scans were classified into length classes with 5mm length increments; mean width, instep height, and heel width were calculated for each length class. Therefore, shoes should be developed separately for each group, region, and sex, and at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.”Checked by Product.ai on 2026-11-02Population foot scan distributions showing that 90% of customers within a 5mm foot-length class are properly accommodated by a single standard shoe width size.Research area Foot shape, width, and shoe fitCited in Run type & weekly mileage, How should running shoes fit, and why do width and women's lasts matter?
In a 2003 Gait and Posture study, Nester and colleagues found that medially wedged orthoses (shoe inserts with a raised inner edge) decreased rearfoot pronation (the inward roll of the heel) and increased the sideways ground reaction force during the contact phase, which the authors read as suggesting reduced shock attenuation. Effects on knee, hip, and pelvis movement were generally minimal.Gait and Posture (Nester and colleagues) (2003)“Medially wedged orthoses decreased rearfoot pronation and increased the laterally directed ground reaction force during the contact phase, suggesting reduced shock attenuation. The effects of the orthoses on knee, hip and pelvis kinematics were generally minimal.”Checked by Product.ai on 2026-11-02Motion and force measurements showing that medially wedged orthoses leave rearfoot pronation unchanged or lower the sideways ground reaction force during the contact phase.Research area Shoe inserts, pronation control, and injury riskCited in Run type & weekly mileage, Cushioned vs. stability shoes
In a 2011 Journal of Athletic Training review, Mills and colleagues found no significant difference in the risk of lower limb overuse conditions between custom and prefabricated foot orthoses (relative risk, RR, 1.14; 95% confidence interval, CI, 0.90 to 1.44, a range that includes 1.0, meaning no clear difference), based on 2 randomized controlled trials (RCTs) reported in 1 study.Journal of Athletic Training (Mills and colleagues) (2011-01-01)“Based on 4 RCTs in which the researchers examined prevention of lower limb overuse conditions with foot orthoses versus control in military personnel, the RR was 1.49 (95% CI = 1.07, 2.08). Based on 2 RCTs reported in 1 study of the use of custom versus prefabricated foot orthoses for prevention of lower limb overuse conditions, no significant difference in risk was found (RR = 1.14, 95% CI = 0.90, 1.44).”Checked by Product.ai on 2026-11-02Randomized trials showing custom foot orthoses significantly lower the risk of lower limb overuse conditions compared with prefabricated orthoses, with a relative risk whose confidence interval excludes 1.0.Research area Shoe inserts, pronation control, and injury riskCited in Run type & weekly mileage, Cushioned vs. stability shoes
In a 1998 Proceedings of the Royal Society B study, Ferris, Louie and Farley found that human runners adjust their leg stiffness to match changes in surface stiffness, which lets them keep similar running mechanics on different surfaces.Proceedings of the Royal Society B (Ferris, Louie and Farley) (1998-06-01)“A running animal coordinates the actions of many muscles, tendons, and ligaments in its leg so that the overall leg behaves like a single mechanical spring during ground contact. We found that human runners adjust their leg stiffness to accommodate changes in surface stiffness, allowing them to maintain similar running mechanics on different surfaces.”Checked by Product.ai on 2026-11-02Force-plate and motion measurements of humans running on surfaces of different stiffness showing constant leg stiffness together with markedly different running mechanics on each surface.Research area Surface stiffness, foot strike, and leg mechanicsCited in Run type & weekly mileage, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?
In a 2010 Nature study, Lieberman and colleagues showed that on hard surfaces, barefoot runners who land on the forefoot generate smaller collision forces than shod (shoe-wearing) rearfoot strikers, primarily because they land with a more plantarflexed foot (toes pointed down) and more ankle compliance, which lowers the effective mass of the body that collides with the ground.Nature (Lieberman and colleagues) (2010)“Kinematic and kinetic analyses show that even on hard surfaces, barefoot runners who fore-foot strike generate smaller collision forces than shod rear-foot strikers. This difference results primarily from a more plantarflexed foot at landing and more ankle compliance during impact, decreasing the effective mass of the body that collides with the ground.”Checked by Product.ai on 2026-11-02Impact force measurements on hard surfaces showing that barefoot forefoot strikers generate equal or larger collision forces than shod rearfoot strikers.Research area Surface stiffness, foot strike, and leg mechanicsCited in Run type & weekly mileage, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?
In a 2003 update in The Anatomical Record Part A, Frost described how load-bearing bones in free-living vertebrates adapt their strength to the mechanical loads on them, with voluntary mechanical usage determining most of the strength of healthy bones after birth in ways that minimize nontraumatic fractures and create a bone-strength safety factor.The Anatomical Record Part A (Frost) (2003)“It concerns load-bearing bones in postnatal free-living bony vertebrates, physiologic bone loading, and how bones adapt their strength to the mechanical loads on them. Voluntary mechanical usage determines most of the postnatal strength of healthy bones in ways that minimize nontraumatic fractures and create a bone-strength safety factor.”Checked by Product.ai on 2026-11-02Studies of load-bearing bone in vertebrates after birth showing that bone strength does not change in response to the mechanical loads placed on the bone.Research area Bone adaptation to mechanical loadCited in Run type & weekly mileage, How do running speed and shoe cushioning change impact forces on your legs?
In a 1989 Acta Physiologica Scandinavica study of 12 healthy men on a force platform (a floor sensor that measures each footstep), Nilsson and Thorstensson showed that as running speed increased from 1.5 to 6.0 m/s the force periods got shorter and the peak vertical ground reaction force (the peak upward push from the ground) rose from approximately 2.0 to 2.9 body weights.Acta Physiologica Scandinavica (Nilsson and Thorstensson) (1989-06-01)“Twelve healthy male subjects were studied during walking (1.0-3.0 m s-1) and running (1.5-6.0 m s-1). Increased speed was accompanied by shorter force periods and larger peak forces. The peak amplitude of the vertical reaction force in walking and running increased with speed from approximately 1.0 to 1.5 b.w. and 2.0 to 2.9 b.w. respectively.”Checked by Product.ai on 2026-11-02Force-platform measurements of runners across 1.5 to 6.0 m/s showing constant force-period duration or falling peak vertical ground reaction force as speed increases.Research area Running speed and ground impact forcesCited in Run type & weekly mileage, How do running speed and shoe cushioning change impact forces on your legs?
In a 2000 Journal of Applied Physiology study of 33 runners whose top speeds on a level treadmill ranged from 6.2 to 11.1 m/s, Weyand and colleagues found that the time taken to swing the leg forward for the next step did not vary with top speed (P = 0.18), while the average force applied to the ground relative to body weight was 1.26 times greater for a runner with a top speed of 11.1 m/s than for one with 6.2 m/s.Journal of Applied Physiology (Weyand and colleagues) (2000)“The top speeds of the 33 subjects who completed the level treadmill protocol spanned a 1.8-fold range from 6.2 to 11.1 m/s. Among these subjects, the regression of F(avge)/W(b) on top speed indicated that this force was 1.26 times greater for a runner with a top speed of 11.1 vs. 6.2 m/s. In contrast, the time taken to swing the limb into position for the next step (t(sw)) did not vary (P = 0.18).”Checked by Product.ai on 2026-11-02Treadmill force-plate data showing that faster top speeds come mainly from shorter leg swing times rather than from greater average ground force relative to body weight.Research area Running speed and ground impact forcesCited in Run type & weekly mileage, How do running speed and shoe cushioning change impact forces on your legs?
In a 2002 Journal of Physiology study using microneurography (recording electrical activity from single nerve fibers) on 104 touch receptors in the skin of the human foot sole, Kennedy and Inglis found that 57% (59 units) were fast-adapting type I, 14% (14 units) were fast-adapting type II, 14% (15 units) were slow-adapting type I, and 15% (16 units) were slow-adapting type II.The Journal of Physiology (Kennedy and Inglis) (2002-02-01)“A total of 104 cutaneous mechanoreceptors were identified in the glabrous skin of the foot. This sample consisted of 15 slow adapting type I (14 %), 16 slow adapting type II (15 %), 59 fast adapting type I (57 %), and 14 fast adapting type II units (14 %).”Checked by Product.ai on 2026-11-02Microneurography recordings of touch receptors in human foot-sole skin showing more slow-adapting than fast-adapting units.Research area Foot sole touch receptorsCited in Run type & weekly mileage, How do running speed and shoe cushioning change impact forces on your legs?
In a 2026 Journal of Sport and Health Science study of 15 trained runners (11 males and 4 females), Healey and colleagues found that running economy in a prototype advanced footwear technology (AFT) shoe, the FR3, was 3.15% ± 1.24%, 3.62% ± 1.25%, and 3.54% ± 1.16% (mean ± SD) better than in the PUMA Fast-R 2, the Nike Alphafly 3, and the Adidas Adios Pro Evo 1 (all p < 0.001), and every individual performed best in the FR3.Journal of Sport and Health Science (Healey and colleagues) (2026-03-12)“We quantified running economy (i.e., the rate of metabolic energy consumption while running at a specified speed) for 15 trained runners (11 males and 4 females) in this prototype AFT shoe and 3 commercially available AFT models: the PUMA Fast-R 2 (FR2), the Nike Alphafly 3 (NIKE), and the Adidas Adios Pro Evo 1 (ADI). Running economy in the FR3 was 3.15% ± 1.24%, 3.62% ± 1.25%, and 3.54% ± 1.16% (mean ± SD) better than in the FR2, NIKE, and ADI (all p < 0.001), respectively, and every individual performed best in the FR3 shoes.”Checked by Product.ai on 2026-11-02Controlled metabolic testing showing the FR3 prototype is not better in running economy than the PUMA Fast-R 2, Nike Alphafly 3, or Adidas Adios Pro Evo 1, or that fewer than all runners performed best in it.Research area Adidas Adios racing shoes and running economyCited in Major running shoe brands
In a 2018 Sports Medicine study of runners at three velocities, Hoogkamer, Kram and Arellano found that, averaged across all three velocities and with shoe mass matched, the energetic cost of running in the NP shoes (16.45 ± 0.89 W/kg) was 4.16% lower than in the NS shoes (17.16 ± 0.92 W/kg) and 4.01% lower than in the AB shoes (17.14 ± 0.97 W/kg), both p < 0.001.Sports Medicine (Hoogkamer, Kram and Arellano) (2018)“Averaged across all three velocities, the energetic cost for running in the NP shoes (16.45 ± 0.89 W/kg; mean ± SD) was 4.16 and 4.01% lower than in the NS and AB shoes, when shoe mass was matched (17.16 ± 0.92 and 17.14 ± 0.97 W/kg, respectively, both p < 0.001).”Checked by Product.ai on 2026-11-02Metabolic crossover trials showing the energetic cost of running in the NP shoes is not lower than in the AB shoes when shoe mass is matched.Research area Adidas Adios racing shoes and running economyCited in Major running shoe brands
In a 2016 American Journal of Sports Medicine study of 553 leisure-time runners observed for 6 months after receiving shoes with a heel-to-toe drop of 10 mm, 6 mm, or 0 mm, Malisoux and colleagues found that low-drop shoes (6 mm and 0 mm) were associated with lower injury risk in occasional runners (hazard ratio, HR, 0.48; 95% confidence interval, CI, 0.23 to 0.98) but higher injury risk in regular runners (HR 1.67; 95% CI 1.07 to 2.62).The American Journal of Sports Medicine (Malisoux and colleagues) (2016)“Leisure-time runners (N = 553) were observed for 6 months after having received a pair of shoes with a heel-to-toe drop of 10 mm (D10), 6 mm (D6), or 0 mm (D0). After stratification according to running regularity, low-drop shoes (D6 and D0) were found to be associated with a lower injury risk in occasional runners (HR, 0.48; 95% CI, 0.23-0.98), whereas these shoes were associated with a higher injury risk in regular runners (HR, 1.67; 95% CI, 1.07-2.62).”Checked by Product.ai on 2026-11-02Six-month injury data from leisure-time runners showing low-drop shoes (6 mm or 0 mm) are not associated with lower injury risk in occasional runners, or are associated with equal or lower injury risk in regular runners.Research area Zero-drop and minimalist footwear injury riskCited in Major running shoe brands, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?, Foam breakdown & replacement miles
A 2026 Gait and Posture meta-analysis found that transitioning to minimalist footwear was associated with a moderate increase in injury risk (overall effect size, a standardized measure of the difference, 3.529; 95% CI 2.41 to 4.646), most frequently bone marrow edema (swelling inside the bone) in the metatarsal region, Achilles tendinopathy (tendon pain above the heel), and calf pain, related to adopting a forefoot strike pattern, and noted that supervised retraining programs of at least 12 weeks may support progressive adaptation of the musculoskeletal system and reduce injury risk.Gait and Posture (2026 Minimalist Transition Meta-Analysis) (2026-08-10)“The transition to minimalist footwear was associated with a moderate increase in injury risk, with an overall effect size of 3.529 (95%CI: 2.41-4.646) and low heterogeneity. The most frequently reported injuries were bone marrow edema in the metatarsal region, Achilles tendinopathy and calf pain, related to the adoption of a forefoot strike pattern. Supervised retraining programs of at least 12 weeks may support progressive adaptation of the musculoskeletal system and reduce risk of injury.”Checked by Product.ai on 2026-11-02Prospective trials of runners transitioning to minimalist footwear showing no increase in injury risk, or no link between the transition and metatarsal bone marrow edema, Achilles tendinopathy, or calf pain.Research area Zero-drop and minimalist footwear injury riskCited in Major running shoe brands, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?, Foam breakdown & replacement miles
In a 2019 Scientific Reports study, Jurca and colleagues concluded that shoes should be developed separately for each group, region, and sex, that a shoe designed for a single group fits a different segment of the population in another group, and that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.Scientific Reports (Jurca and colleagues) (2019-12-16)“Therefore, shoes should be developed separately for each group, region, and sex, and at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers. Beyond this, our analysis asserts that a shoe designed for a single group will fit a different segment of the population in another group, and that existing last grading tables should be updated to reflect the foot dimensions of current consumers.”Checked by Product.ai on 2026-11-02Foot scan data showing that fewer than 3 shoe widths per length class still provide a proper fit for 90% of customers, or that a shoe designed for one group fits the same segment of the population in another group.Research area Foot shape, width, and shoe fitCited in Major running shoe brands, How should running shoes fit, and why do width and women's lasts matter?
In a 2026 Sports Medicine - Open crossover trial of 22 trained long-distance runners (50% female) running multiple 5-minute bouts at their season's best marathon pace (15.0 ± 2.3 km/h) in the Asics Metaspeed Sky+, Nike Air Zoom Alphafly Next% 2, and Puma Fast-R Nitro Elite v1, shorter ground contact time was significantly associated with lower energetic cost of transport (the energy used to cover a distance; p = 0.002), reflecting a ~1% improvement in running economy per 4 ms decrease.Sports Medicine - Open (2026 AFT Crossover Study) (2026-03-20)“Twenty-two trained long-distance runners (50% female) ran multiple 5-minute running bouts at their season's best marathon pace (15.0 ± 2.3 km⸱h- 1) while wearing three standardized AFT models (Nike Air Zoom Alphafly Next% 2, Puma Fast-R Nitro Elite v1, Asics Metaspeed Sky+). Across shoe conditions, shorter ground contact time was significantly associated with lower energetic cost of transport (β = 0.025, 95% CI [0.010, 0.040], t(42) = 3.33, p = 0.002), reflecting a ~ 1% improvement in RE per 4 ms decrease.”Checked by Product.ai on 2026-11-02Crossover metabolic testing across advanced footwear models at marathon pace showing that shorter ground contact time is associated with higher or unchanged energetic cost of transport.Research area ASICS Metaspeed and carbon-plated super-shoesCited in Major running shoe brands, Carbon-plated super-shoes
A 2026 BMC Sports Science, Medicine and Rehabilitation systematic review found that carbon-fibre plate shoes with resilient midsole foams improved running economy by 2.6 to 4.2%, with some models improving running economy during prolonged running by 2 to 6%.BMC Sports Science, Medicine and Rehabilitation (2026 Systematic Review) (2026-05-04)“Carbon-fibre plate shoes with resilient midsole foams improved running economy by 2.6-4.2%, with some models reducing metabolic cost by ~ 4% and improving running economy during prolonged running by 2-6%, while increasing lactate-threshold speed by 0.5-0.6 km·h⁻¹ and reducing heart rate (~ 4-5%) and blood lactate (~ 0.3-0.5 mmol·L⁻¹).”Checked by Product.ai on 2026-11-02Controlled metabolic trials showing carbon-fibre plate shoes with resilient midsole foams improve running economy by less than 2.6%.Research area ASICS Metaspeed and carbon-plated super-shoesCited in Major running shoe brands, Carbon-plated super-shoes
In a 2015 British Journal of Sports Medicine review, Nigg and colleagues noted the lack of conclusive evidence for two variables once thought to be the prime predictors of running injuries, and suggested two new paradigms, the preferred movement path and the comfort filter, in which a runner intuitively selects a comfortable product that lets them stay in their preferred movement path.British Journal of Sports Medicine (Nigg, Baltich, Hoerzer and Enders) (2015)“Based on the lack of conclusive evidence for these two variables, which were once thought to be the prime predictors of running injuries, two new paradigms are suggested to elucidate the association between footwear and injury. These two paradigms, 'the preferred movement path' and 'the comfort filter', suggest that a runner intuitively selects a comfortable product using their own comfort filter that allows them to remain in the preferred movement path.”Checked by Product.ai on 2026-11-02Prospective trials showing conclusive evidence that the two variables once thought to be the prime predictors of running injuries do predict them.Research area Comfort filter and pronation control paradigmsCited in Major running shoe brands, Cushioned vs. stability shoes, Sizing, width & heel drop
In a 2022 Frontiers in Sports and Active Living clinical review of four paradigms (Pronation Control, Impact Force Modification, Habitual Joint Motion Path, and Comfort Filter), Agresta and colleagues found that evidence in support of any paradigm is generally limited and, in the absence of a clearly supported paradigm, proposed that in general clinicians should recommend footwear that is lightweight, comfortable, and has minimal pronation control technology (features that limit the inward roll of the foot).Frontiers in Sports and Active Living (Agresta and colleagues) (2022)“Subsequently, we review the four main paradigms that have driven footwear design and recommendation with respect to injury risk reduction: Pronation Control, Impact Force Modification, Habitual Joint (Motion) Path, and Comfort Filter. We find that evidence in support of any paradigm is generally limited. In the absence of a clearly supported paradigm, we propose that in general clinicians should recommend footwear that is lightweight, comfortable, and has minimal pronation control technology.”Checked by Product.ai on 2026-11-02Randomized clinical trials showing clear evidence that any one of the four paradigms, such as pronation control, reduces injury in recreational runners.Research area Comfort filter and pronation control paradigmsCited in Major running shoe brands, Cushioned vs. stability shoes, Sizing, width & heel drop
In a 2019 Scientific Reports study classifying foot scans into 5mm length increments and calculating mean width, instep height, and heel width for each length class, Jurca and colleagues concluded that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.Scientific Reports (Jurca and colleagues) (2019-12-16)“Foot scans were classified into length classes with 5mm length increments; mean width, instep height, and heel width were calculated for each length class. Therefore, shoes should be developed separately for each group, region, and sex, and at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.”Checked by Product.ai on 2026-11-02Foot scan datasets showing that a single medium shoe width accommodates over 90% of customers across all 5mm length classes.Research area Foot shape, width, and shoe fitCited in Major running shoe brands, How should running shoes fit, and why do width and women's lasts matter?
In a 2018 Scientific Reports biomechanics study, Kulmala and colleagues found that at the faster running speed (14.5 km/h) the ground reaction force impact peak and loading rate (how quickly force builds) were 10.7% and 12.3% greater in a maximalist shoe than in a conventional shoe, with only a slightly higher impact peak (6.4%) at 10 km/h, and the authors attributed the greater impact loading to a stiffer leg during landing.Scientific Reports (Kulmala and colleagues) (2018-11-30)“This surprising outcome was more pronounced at fast running speed (14.5 km/h), where ground reaction force impact peak and loading rate were 10.7% and 12.3% greater, respectively, in the maximalist shoe compared to the conventional shoe, whereas only a slightly higher impact peak (6.4%) was found at the 10 km/h speed with the maximalist shoe. We attribute the greater impact loading with the maximalist shoes to stiffer leg during landing compared to that of running with the conventional shoes.”Checked by Product.ai on 2026-11-02Force-plate and motion-capture measurements showing maximalist shoes do not raise impact peak or loading rate at 10 and 14.5 km/h, or that leg stiffness at landing is not higher in maximalist shoes.Research area Maximalist stack height and rocker geometryCited in Major running shoe brands, Cushioned vs. stability shoes
A 2026 Sports Medicine - Open systematic review of 14 studies, mostly of male recreational or experienced runners, found that thicker soles were linked to increased stance time (time on the ground), more ankle dorsiflexion (toes pulled toward the shin) at initial contact, and increased peak eversion (inward roll of the foot) in the frontal plane.Sports Medicine - Open (2026 Sole Thickness Systematic Review) (2026-04-29)“Fourteen studies met the criteria, mostly focusing on male recreational or experienced runners. Thicker soles were linked to increased stance time, while other spatiotemporal parameters remained unchanged. Significant effects were seen in ankle kinematics, with more dorsiflexion at initial contact with thicker soles, though knee and hip movements were less affected. Thicker soles increased peak eversion in the frontal plane.”Checked by Product.ai on 2026-11-02Controlled kinematic studies across sole thicknesses showing that thicker soles are linked to decreased peak eversion in the frontal plane.Research area Maximalist stack height and rocker geometryCited in Major running shoe brands, Cushioned vs. stability shoes
A 2026 Journal of Foot and Ankle Research scoping review of academic sources and commercial materials from eight leading footwear brands found that academic sources used diverse terminology with no consistent definition or threshold for what counts as a rocker (a curved sole shape), and that commercial descriptions relied on qualitative brand-specific language lacking measurable parameters.Journal of Foot and Ankle Research (2026 Rocker Geometry Scoping Review) (2026-09-01)“Commercial materials from eight leading footwear brands were also examined to assess nonacademic descriptions of rocker features. Academic sources used diverse terminology and geometric descriptors, such as apex position, rocker angle, curvature radius and toe spring, but no consistent definition or threshold for classifying a rocker was identified. Commercial descriptions relied on qualitative brand-specific language lacking measurable parameters.”Checked by Product.ai on 2026-11-02Standardized quantitative disclosures across major footwear brands specifying exact rocker apex percentages, curvature radii, and rocker angles per model.Research area Maximalist stack height and rocker geometryCited in Major running shoe brands, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?
In a 2019 Scientific Reports study, Jurca and colleagues reported statistically significant differences in mean foot measurements across regions and sexes along with large dispersion within each customer group, concluding that at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.Scientific Reports (Jurca and colleagues) (2019-12-16)“This study confirms the existence of many statistically significant differences in mean foot measurements amongst the regions and between the sexes, and a large dispersion of foot measurements within each group of customers. Therefore, shoes should be developed separately for each group, region, and sex, and at least 3 shoe widths per length class are required to provide a proper fit for 90% of customers.”Checked by Product.ai on 2026-11-02Population 3D foot scan studies showing that a single shoe width fits at least 90% of customers within a length class.Research area Foot shape, width, and shoe fitCited in Major running shoe brands, How should running shoes fit, and why do width and women's lasts matter?
In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues concluded that incorporating polyether block amide (PEBA) rather than ethylene-vinyl acetate (EVA) in advanced footwear technology (AFT, shoes shown to improve running economy) gives a clear running economy (RE) advantage when the models are new, but after 450 km of use the PEBA and EVA shoes have similar running economy.Scandinavian Journal of Medicine and Science in Sports (Rodrigo-Carranza and colleagues) (2024)“Ethylene and vinyl acetate (EVA) and polyether block amide (PEBA) are recently the most widely used materials for advanced footwear technology (AFT) that has been shown to improve running economy (RE). CONCLUSION: There is a clear RE advantage of incorporating PEBA versus EVA in an AFT when the models are new. However, after 450 km of use, the PEBA and EVA shoes had similar RE.”Checked by Product.ai on 2026-11-02Controlled metabolic testing showing no running economy difference between new PEBA and new EVA advanced footwear, or a PEBA advantage that persists after 450 km of use.Research area PEBA versus EVA foam durability over 450 kmCited in Major running shoe brands, Foam breakdown & replacement miles
In a 2024 Scandinavian Journal of Medicine and Science in Sports randomized crossover study across four 4-minute trials at 13 km/h, Rodrigo-Carranza and colleagues found that energy cost in polyether block amide (PEBA) advanced footwear increased significantly after 450 km of wear compared with new (15.21 ± 1.01 versus 14.87 ± 0.99 W/kg, p < 0.05), whereas ethylene-vinyl acetate (EVA) shoes showed no significant difference between worn and new (15.13 ± 1.14 versus 15.15 ± 1.13 W/kg).Scandinavian Journal of Medicine and Science in Sports (Rodrigo-Carranza and colleagues) (2024)“Subjects ran four 4-min trials at 13 km∙h-1 with both fresh EVA and PEBA AFT and with the same models with 450 km of wear using a randomized crossover experimental design. There was a significant increase in energy cost in the worn PEBA condition compared with new (15.21 ± 1.01 and 14.87 ± 0.99 W/kg; p < 0.05; ES = 0.54), without differences between worn EVA (15.13 ± 1.14 W/kg; p > 0.05), and new EVA (15.15 ± 1.13 w/kg; ES = 0.02).”Checked by Product.ai on 2026-11-02Crossover metabolic testing showing no significant increase in energy cost in PEBA advanced footwear after 450 km of wear, or a significant increase in EVA advanced footwear after 450 km of wear.Research area Nike PEBA racing foam and running economyCited in Major running shoe brands, Foam breakdown & replacement miles
In a 2026 Sports Medicine - Open crossover study of 14 moderately-trained runners at 7.5, 9.0, 10.5, and 12.0 km/h, oxygen cost (the oxygen used per kilogram of body weight per kilometer) combined across all tested speeds was 5.4 ml O2/kg/km lower in the On Cloudboom Echo 3, an advanced footwear technology (AFT) shoe, than in the traditional On Cloudrunner 2 (95% CI, 3.9 to 6.9 lower; p < 0.001).Sports Medicine - Open (2026 On Footwear Crossover Trial) (2026-02-17)“Fourteen moderately-trained runners (6 men, 8 women, age 25.5 ± 2.8 years, body mass index 21.7 ± 2.3 kg m-2, V̇O2peak 49.8 ± 5.1 ml O2 kg-1 min-1) ran at four speeds (7.5, 9.0, 10.5 and 12.0 km h-1) with three different footwear conditions: traditional running shoes (On Cloudrunner 2, TRA); AFT shoes (On Cloudboom Echo 3, CBE); and prototype shoes combining AFT and standard features (high compliance, energy return, and mass; On Prototype, MIX). Combining all tested speeds, O2 cost was lower for CBE compared with both TRA (-5.4 ml O2 kg-1 km-1, 95% CI: -6.9 to -3.9 ml O2 kg-1 km -1, p < 0.001)”Checked by Product.ai on 2026-11-02Crossover metabolic testing at several speeds showing no oxygen cost difference between the On Cloudboom Echo 3 and the On Cloudrunner 2.Research area On Cloudboom racing economy and bending stiffnessCited in Major running shoe brands, Carbon-plated super-shoes
In a 2025 Frontiers in Sports and Active Living biomechanics study testing shoes with low (0.31 Nm/deg), medium (0.40 Nm/deg), and high (0.48 Nm/deg) longitudinal bending stiffness (LBS, how much the shoe resists bending along its length), negative work (energy absorbed) at the metatarsophalangeal (MTP, ball-of-foot) joints was significantly higher in the low-stiffness shoes than in the high-stiffness shoes (0.21 ± 0.05 versus 0.13 ± 0.05 J/kg, p = 0.001).Frontiers in Sports and Active Living (2025 LBS Biomechanics Study) (2025-05-27)“They were tested wearing shoes with three LBS levels: low (LLBS, 0.31 Nm/deg), medium (MLBS, 0.40 Nm/deg), and high (HLBS, 0.48 Nm/deg). Negative work at the MTP joints was significantly higher in the LLBS shoes than in the HLBS shoes (LLBS: 0.21 ± 0.05 J/kg, MLBS: 0.16 ± 0.03 J/kg, HLBS: 0.13 ± 0.05 J/kg, F = 12.053, p = 0.001).”Checked by Product.ai on 2026-11-02Joint-force calculations showing that negative work at the MTP joints is equal or lower in low-stiffness shoes than in high-stiffness shoes.Research area On Cloudboom racing economy and bending stiffnessCited in Major running shoe brands, Carbon-plated super-shoes
In a 2025 International Journal of Sports Physiology and Performance randomized crossover study of 15 trained distance runners completing two 60-minute treadmill runs at about 75% of critical speed, oxygen uptake drift (the slow rise in oxygen use over a run) was significantly lower in the Saucony Endorphin Pro 3, an advanced footwear technology (AFT) shoe, than in the Saucony Kinvara control shoe (0.00056 versus 0.00088 mL/kg/min; P = .018), and postrun vertical impulse decreased by only 0.2% in the AFT versus 4.9% in control (P = .016).International Journal of Sports Physiology and Performance (2025 Saucony AFT Study) (2025-11-08)“Fifteen trained distance runners (7 women, 8 men; 23.2 [1.6] y; 65.5 [7.8] kg) completed two 60-minute treadmill runs at ∼75% of critical speed, wearing either control shoes (Saucony Kinvara) or AFT (Saucony Endorphin Pro 3) in a randomized crossover design. V˙O2 drift was significantly lower with AFT (0.00056 [0.00060] mL·kg-1·min-1) than with control shoes (0.00088 [0.00071] mL·kg-1·min-1; P = .018). Postrun vertical impulse decreased by only 0.2% in AFT versus 4.9% in control (P = .016), indicating reduced neuromuscular fatigue.”Checked by Product.ai on 2026-11-02Extended 60-minute metabolic trials showing no difference in oxygen uptake drift or postrun vertical impulse between the Saucony Endorphin Pro 3 and the Saucony Kinvara.Research area Saucony Endorphin Pro economy and runner variabilityCited in Major running shoe brands, Carbon-plated super-shoes
In a 2023 Sports Medicine study, Knopp and colleagues found large individual variability in running economy with advanced footwear technology compared with a flat racing shoe: world-class Kenyan road runners ranged from an 11.3% drawback to an 11.4% benefit, and amateur Europeans from a 9.7% benefit to a 1.1% drawback, while a post-hoc meta-analysis found an overall significant medium benefit compared with traditional flats.Sports Medicine (Knopp and colleagues) (2023-03-02)“Laboratory results revealed large variability in both world-class Kenyan road runners, which ranged from a 11.3% drawback to a 11.4% benefit, and amateur Europeans, which ranged from a 9.7% benefit to a 1.1% drawback in running economy of advanced footwear technology compared to a flat. The post-hoc meta-analysis revealed an overall significant medium benefit of advanced footwear technology on running economy compared with traditional flats.”Checked by Product.ai on 2026-11-02Metabolic testing across runners showing every runner has the same running-economy response to advanced footwear technology.Research area Saucony Endorphin Pro economy and runner variabilityCited in Major running shoe brands, Carbon-plated super-shoes
In a 2019 Sports Medicine study, Hoogkamer, Kipp and Kram reported that substantial mechanical energy was stored and returned in compressing the midsole foam of the NP shoes but not in bending the carbon-fiber plate, and concluded that the metabolic savings of those shoes appear to be due to superior energy storage in the midsole foam, lever effects of the plate on ankle mechanics, and stiffening effects of the plate on the metatarsophalangeal (MTP, ball-of-foot) joint.Sports Medicine (Hoogkamer, Kipp and Kram) (2019)“Substantial mechanical energy was stored/returned in compressing the NP midsole foam, but not in bending the carbon-fiber plate. CONCLUSION: The metabolic savings of the NP shoes appear to be due to: (1) superior energy storage in the midsole foam, (2) the clever lever effects of the carbon-fiber plate on the ankle joint mechanics, and (3) the stiffening effects of the plate on the MTP joint.”Checked by Product.ai on 2026-11-02Mechanical and joint-force measurements showing that bending the carbon-fiber plate stores and returns more energy than compressing the midsole foam in the shoes studied.Research area Carbon-fiber plates and midsole energy returnCited in Carbon-plated super-shoes
In a 2021 Journal of Sport and Health Science study, Healey and Hoogkamer found that cutting the carbon-fiber plate and reducing longitudinal bending stiffness (how much the shoe resists bending along its length) in the Nike Vaporfly 4% did not significantly change running economy (the energy cost of running at a set speed), which was on average 0.55% ± 1.77% worse in the cut-plate condition compared with intact (95% CI -1.44% to 0.40%).Journal of Sport and Health Science (Healey and Hoogkamer) (2021-07-17)“Running economy did not significantly differ between shoe conditions (on average, 0.55% ± 1.77% (mean ± SD)) worse in the VFcut compared to the VFintact; 95% confidence interval (-1.44% to 0.40%). Cutting the carbon-fiber plate and reducing the longitudinal bending stiffness did not have a significant effect on the energy savings in the Nike Vaporfly 4%.”Checked by Product.ai on 2026-11-02Metabolic testing of the Nike Vaporfly 4% showing that cutting the carbon-fiber plate significantly worsens running economy.Research area Carbon-fiber plates and midsole energy returnCited in Carbon-plated super-shoes
In a 2019 European Journal of Sport Science study of 15 healthy female runners at their preferred speed in shoes with 0, 6, and 10 mm of drop (the height difference between heel and forefoot), Besson and colleagues found significantly higher ankle dorsiflexion moments (the turning force pulling the toes toward the shin) during the braking phase in the 0 mm shoes than in the 6 and 10 mm shoes, with no difference between 6 and 10 mm.European Journal of Sport Science (Besson and colleagues) (2019-04-18)“Fifteen healthy female runners ran on a 15-m runway at their preferred speed with three different shoe-drop conditions: 0 (D0), 6 (D6) and 10 (D10) mm. For 1D analysis, significantly higher ankle dorsiflexion moments were found in D0 compared to D6 and D10 during the braking phase (p < .01). No difference was found between D6 and D10 conditions (p > .05).”Checked by Product.ai on 2026-11-02Three-dimensional inverse dynamics showing equal or lower braking-phase ankle dorsiflexion moments in 0 mm shoes than in 6 and 10 mm shoes at preferred running speed.Research area Heel-to-toe drop and ankle loadingCited in Sizing, width & heel drop, What heel-to-toe drop should you choose, and what happens with zero-drop shoes?
In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues found a clear running economy (RE) advantage for new polyether block amide (PEBA) versus ethylene-vinyl acetate (EVA) advanced footwear (14.87 ± 0.99 versus 15.15 ± 1.13 W/kg), but after 450 km of use PEBA energy cost rose significantly to 15.21 ± 1.01 W/kg while EVA remained unchanged at 15.13 ± 1.14 W/kg, leaving both shoes with similar running economy.Scandinavian Journal of Medicine and Science in Sports (Rodrigo-Carranza and colleagues) (2024)“There was a significant increase in energy cost in the worn PEBA condition compared with new (15.21 ± 1.01 and 14.87 ± 0.99 W/kg; p < 0.05; ES = 0.54), without differences between worn EVA (15.13 ± 1.14 W/kg; p > 0.05), and new EVA (15.15 ± 1.13 w/kg; ES = 0.02). CONCLUSION: There is a clear RE advantage of incorporating PEBA versus EVA in an AFT when the models are new. However, after 450 km of use, the PEBA and EVA shoes had similar RE.”Checked by Product.ai on 2026-11-02Crossover metabolic trials at 450 km showing worn PEBA midsoles retain their full fresh running-economy advantage over worn EVA midsoles.Research area PEBA versus EVA foam durability over 450 kmCited in Sizing, width & heel drop, Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?
In a 2024 Scandinavian Journal of Medicine and Science in Sports study, Rodrigo-Carranza and colleagues showed that the increase in running energy cost between new and 450 km worn shoes was significantly higher for polyether block amide (PEBA) shoes (0.32 ± 0.38 W/kg) than for ethylene-vinyl acetate (EVA) shoes (0.06 ± 0.58 W/kg, p < 0.01), leaving PEBA and EVA advanced footwear with similar running economy after 450 km.Scandinavian Journal of Medicine and Science in Sports (Rodrigo-Carranza and colleagues) (2024)“The increase in energy cost between new and worn was significantly higher for the PEBA shoes (0.32 ± 0.38 W/kg) but without significant increase for the EVA shoes (0.06 ± 0.58 W/kg) (p < 0.01; ES = 0.51) with changes in step frequency and step length. CONCLUSION: There is a clear RE advantage of incorporating PEBA versus EVA in an AFT when the models are new. However, after 450 km of use, the PEBA and EVA shoes had similar RE.”Checked by Product.ai on 2026-11-02Longitudinal metabolic measurements showing PEBA midsoles experience smaller or equal energy-cost degradation compared with EVA midsoles over 450 km.Research area PEBA versus EVA foam durability over 450 kmCited in Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?
In a 2004 Journal of Biomechanics study, Verdejo and Mills found that peak plantar pressure (the highest pressure under the foot) increased on average by 100% after a 500 km run, and that scanning electron microscopy (high-magnification imaging) showed structural damage in the foam, with wrinkling of faces and some holes, after a 750 km run.Journal of Biomechanics (Verdejo and Mills) (2004)“The peak plantar pressure increased on average by 100% after 500 km run. Scanning electron microscopy shows that structural damage (wrinkling of faces and some holes) occurred in the foam after 750 km run. Fatigue of the foam reduces heelstrike cushioning, and is a possible cause of running injuries.”Checked by Product.ai on 2026-11-02Plantar pressure and scanning electron microscopy measurements showing unchanged peak plantar pressure and no structural damage in the foam after 500 to 750 km of running.Research area Midsole foam breakdown and shock lossCited in Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?
In a 1985 American Journal of Sports Medicine mechanical aging study, Cook, Kester and Brunet found that in general the shoes retained approximately 75% of their initial shock absorption after 50 miles of simulated running, approximately 67% after 100 to 150 miles, and less than 60% between 250 and 500 miles.The American Journal of Sports Medicine (Cook, Kester and Brunet) (1985-07-01)“In general, the shoes retained approximately 75% of their initial shock absorption capability after 50 miles of simulated running, and approximately 67% after 100 to 150 miles. Between 250 and 500 miles the shoes retained less than 60% of their initial shock absorption capacity.”Checked by Product.ai on 2026-11-02Mechanical testing of simulated running showing shoes retain over 90% of initial shock absorption capacity between 250 and 500 miles.Research area Midsole foam breakdown and shock lossCited in Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?
In a 2014 Journal of Sports Sciences mechanical aging study, Chambon and colleagues aged the heel area of a running shoe at realistic frequencies and impact magnitudes based on a 660 km training plan, and found that on average heel stiffness rose from 127 to 154 N/mm and energy dissipation (viscosity, the impact energy the shoe soaks up) fell from 2.19 to 1.88 J.Journal of Sports Sciences (Chambon and colleagues) (2014-02-28)“To this aim, heel area of the shoe (under calcaneal tuberosity) was first mechanically aged at realistic frequency and impact magnitudes based on a 660 km training plan. Shoes' aging led to increased ST (means: from 127 to 154 N ∙ mm(-1)) and decreased energy dissipation (viscosity) (means: from 2.19 to 1.88 J).”Checked by Product.ai on 2026-11-02Mechanical impact testing of the shoe heel area after a simulated 660 km training plan showing that heel stiffness falls or stays unchanged.Research area Heel cushioning wear over 660 kmCited in Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?
A 2026 ChemSusChem study of enzymatic breakdown of polyurethanes (PURs) reported that docking studies (computer models of how an enzyme binds its target) highlighted the specificity of the enzyme HiC toward ester bonds in the polymer units, and that two HiC variants further enhanced degradation within 24 hours.ChemSusChem (2026 Polyurethane Hydrolysis Study) (2026-03-01)“However, the complex chemistry of PURs containing carbamate, ether, and ester bonds poses a challenge for such a biotechnological process. Docking studies highlighted HiC's specificity toward ester bonds in the PUR polymeric units, and two HiC variants further enhanced degradation within 24 h.”Checked by Product.ai on 2026-11-02Docking or degradation assays showing HiC has no specificity for ester bonds in polyurethane, or that the two HiC variants do not enhance degradation within 24 hours.Research area Polyurethane ester bond breakdownCited in Foam breakdown & replacement miles, How long do running shoes last before the midsole foam wears out?

Challenge a reading

Think a finding here misstates its primary source? Tell us which one and why.

Check a running shoes claim on Product.ai

Check a running shoes claim

Evidence freshness

Readings checked on 2026-11-02.

Who publishes this

Demand.io, Inc. · founded 2009 · Product.ai checks product claims against primary sources. · Product.ai · llms.txt

How this page was made: Product.ai builds each guide from primary-source readings using AI-assisted workflows under human editorial review, so shoppers can check every finding against its cited source rather than affiliate rankings.

Agents get structured access by key, and search crawlers read the same free pages as everyone.