Product.ai
Product.ai / Buying Guides / Sunscreen

Product.ai Buying Guide

What is the best sunscreen?

Your sunscreen choice depends on skin tone and skin sensitivity, because mineral zinc can leave a white cast on dark skin even though dermatologists recommend mineral sunscreens for sensitive skin. Below is how EltaMD, La Roche-Posay, Biore UV, Supergoop, Blue Lizard, CeraVe, Colorescience, Coppertone, and Neutrogena compare on UV filters, white cast, water resistance, and applied coat thickness.

The category answer

What is the best sunscreen?

Your sunscreen choice depends on skin tone and skin sensitivity, because mineral zinc can leave a white cast on dark skin1 even though dermatologists recommend mineral sunscreens for sensitive skin2. Below is how EltaMD, La Roche-Posay, Biore UV, Supergoop, Blue Lizard, CeraVe, Colorescience, Coppertone, and Neutrogena compare on UV filters3, white cast, water resistance, and applied coat thickness4.

Sources and scope notes

Source-checked October 16, 2026 against dermatology and photobiology studies, FDA monographs, and brand product pages from Product.ai's primary-source research.

Powered by Axioms.aiZero affiliate linksFalsifiable findings
Powered by Axioms.aiAll 27 findings passed the source check on October 16, 2026.
Zero affiliate linksThis page has no affiliate links.
Falsifiable findingsAll 27 findings name what would prove them wrong.

7 questions not yet answered; 1 more brand not yet checked.How this page knows ↓

Contents: 5 topics and 5 questions

The answer in one sentence

Coat thickness drives real protection, since typical coats of 0.39 to 1.0 mg/cm2 cut labeled SPF sharply. In a 2026 trial, tested mineral sunscreens caused significant whitening that was 3 times more pronounced on darker skin tones, and tinted sunscreens use iron oxides to protect against visible light. Mineral zinc suits sensitive skin, and 80-minute water-resistant formulas hold up for swimming.

About the readings on this page

Checked readings cited on this page
43
Have a recorded test that would prove them wrong
43
Last source check
2026-10-16
Questions answered in full
9
Each reading names its source in the sentence, records who checked it and when, and states what would prove it wrong. The sources footer lists every source link and quote.

Derm, Asian & everyday brands

How do EltaMD, La Roche-Posay, Supergoop, Biore UV, CeraVe, Blue Lizard, Colorescience, Neutrogena, and Coppertone compare?

Nine brands cover the four main sunscreen buckets shoppers compare: dermatology clinic and European pharmacy face lines (EltaMD, La Roche-Posay), primers and Asian watery fluids (Biore UV, Supergoop), pure and iron-oxide tinted mineral zinc formulas (Blue Lizard, CeraVe, Colorescience), and high-SPF drugstore sport lotions (Coppertone, Neutrogena):

EltaMD logo

EltaMD and La Roche-Posay

UV filters
9.0% zinc oxide and 7.5% octinoxate
SPF and UVA
Coming soon
Key detail
5% niacinamide

In a 2021 survey of 77 dermatology trainees and faculty at hospitals affiliated with Harvard Medical School (out of 218 surveyed, a 35.3% response rate) on the sunscreen brands they most frequently recommended, EltaMD ranked second at 35.1% (27 respondents), followed by CeraVe at 22.1% (17), La Roche-Posay at 18.2% (14), and Vanicream at 11.7% (9). EltaMD UV Clear Broad Spectrum SPF 46 (listed at $46.00 for 1.7 oz or $78.00 for 3.7 oz on EltaMD's online store on October 16, 2026) combines 9.0% zinc oxide and 7.5% octinoxate with 5% niacinamide, while La Roche-Posay offers US Anthelios Face Light Fluid (3% avobenzone, 10% homosalate, 5% octisalate, 7% octocrylene), FDA application 021502 Anthelios SX, and European Anthelios UVMune 400 SPF 50+ launched in March 2022.

Biore UV logo

Biore UV and Supergoop

UV filters
Coming soon
SPF and UVA
SPF 50+ PA++++ and SPF 50
Key detail
Coming soon

Biore UV Aqua Rich Watery Essence carries an SPF 50+ and PA++++ rating on Kao's Japanese product page, using a water base and the UV filter bemotrizinol. Supergoop Unseen Sunscreen SPF 50 uses an anhydrous chemical blend of 3% avobenzone, 7% homosalate, 5% octisalate, and 9% octocrylene.

Blue Lizard logo

Blue Lizard, CeraVe, and Colorescience

Mineral zinc oxide and titanium dioxide

Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion pairs 10% zinc oxide with 8% titanium dioxide as its only listed active ingredients. CeraVe splits its line between Hydrating Mineral Sunscreen Face Lotion SPF 50 (9% titanium dioxide and 7% zinc oxide with three essential ceramides and niacinamide) and Ultra-Light Moisturizing Lotion SPF 30 (3% avobenzone, 10% homosalate, 5% octisalate, and 2.7% octocrylene). Colorescience Total Protection Face Shield Flex SPF 50 uses 12% zinc oxide and achieves a PA++++ UVA rating.

Coppertone logo

Coppertone and Neutrogena

In a June 2023 CivicScience survey of US households, Coppertone ranked as the most favorable of six sunscreen brands at 58%, and its Coppertone Sport lotion uses 3% avobenzone, 15% homosalate, 5% octisalate, and 10% octocrylene. Neutrogena led a 2021 International Journal of Women's Dermatology survey of 77 dermatology faculty and trainees at hospitals affiliated with Harvard Medical School as the most frequently recommended sunscreen brand at 48% (37 respondents), and its Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55 uses 3% avobenzone, 10% homosalate, 5% octisalate, and 10% octocrylene as active ingredients.

1 more brand in this category (Sun Bum) has no primary-source check on file yet and is not compared above.

How Product.ai knows this23

A 2021 survey in the International Journal of Women's Dermatology went to 218 dermatology trainees and faculty at hospitals affiliated with Harvard Medical School, and 77 took part (35.3% response rate). Its table of sunscreen brands those dermatologists most frequently recommended lists Neutrogena 37 (48%), Elta MD 27 (35.1%), CeraVe 17 (22.1%), La Roche-Posay 14 (18.2%) and Vanicream 9 (11.7%). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The paper's methods naming a different respondent count or a sample beyond Harvard Medical School affiliated hospitals, or its table of most frequently recommended sunscreen brands giving different counts or percentages for these brands.

The DailyMed label for La Roche-Posay Anthelios Face Light Fluid Sunscreen, filed by L'Oreal USA Products Inc, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 7% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for this product listing a different active ingredient or a different percentage.

L'Oréal's press release of 24 May 2022 says Anthelios UVMune 400 was launched in pharmacies in March 2022 and was available at that time as either an Invisible Fluid SPF50+ or a Hydrating Cream SPF50+ (SPF is sun protection factor). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The release naming a different launch month or year for Anthelios UVMune 400, or a product format other than Invisible Fluid SPF50+ and Hydrating Cream SPF50+.

The DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55, filed by Kenvue Brands LLC, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 10% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55 listing a different active ingredient or percentage.

The DailyMed label for Coppertone Sport Sunscreen lotion, filed by Beiersdorf Inc, lists avobenzone 3%, homosalate 15%, octisalate 5% and octocrylene 10% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for Coppertone Sport Sunscreen lotion listing a different active ingredient or percentage.

FDA's Drugs@FDA listing for application 021502 shows Anthelios SX as the only over-the-counter (OTC) drug listed with the same active ingredient, strength, and dosage form/route (the form and way it is used), and notes that OTC drugs listed there do not receive therapeutic equivalence ratings (FDA's ratings of whether drugs can be substituted). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

FDA's Drugs@FDA listing for application 021502 showing a second over-the-counter drug with the same active ingredient, strength, and dosage form/route alongside Anthelios SX.

On 16 October 2026, EltaMD's own online store listed UV Clear Broad Spectrum SPF 46 at $46.00 for the 1.7 oz size and $78.00 for the 3.7 oz size. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A dated copy of EltaMD's store listing for UV Clear Broad Spectrum SPF 46 from 16 October 2026 showing a price other than $46.00 for the 1.7 oz size or $78.00 for the 3.7 oz size.

EltaMD's product page says UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide (vitamin B3). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

EltaMD's product page stating a niacinamide percentage other than 5% for UV Clear Broad Spectrum SPF 46, or no longer naming niacinamide.

The drug label for EltaMD UV Clear SPF46 on DailyMed lists zinc oxide 9.0% and octinoxate 7.5% as the active ingredients, and lists cyclopentasiloxane, niacinamide and sodium hyaluronate among the inactive ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for EltaMD UV Clear SPF46 showing different active percentages or omitting cyclopentasiloxane, niacinamide or sodium hyaluronate from the inactive ingredients.

A 2007 study in the Journal of the American Academy of Dermatology assessed seven sunscreens. Subjects were significantly more likely (P < .05, meaning the difference was unlikely to be chance) to say they would use an alcohol-based spray sunscreen again than two of the seven sunscreens assessed. The study says it was endorsed as less greasy and less likely to leave a film, and that recommending alcohol-based spray sunscreens may increase patient compliance (people continuing to use the product). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The 2007 Journal of the American Academy of Dermatology study reporting no significant difference in willingness to reuse the alcohol-based spray sunscreen across the seven sunscreens assessed.

CeraVe's page for Hydrating Mineral Sunscreen Face Lotion SPF 50 says the formula has three essential ceramides and niacinamide, and lists titanium dioxide 9% and zinc oxide 7% as the active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's page for this sunscreen no longer naming niacinamide or ceramides in the formula, or listing different active ingredients or percentages.

CeraVe's own product page for Ultra-Light Moisturizing Lotion SPF 30 lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 2.7% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's product page for Ultra-Light Moisturizing Lotion SPF 30 lists a different set of active ingredients or omits avobenzone or octocrylene.

Dermatology Times reported in February 2006 that Helioplex is a proprietary combination of avobenzone, oxybenzone and a photostabilizing solvent (an ingredient that helps avobenzone resist breaking down in sunlight) called Hallbrite TQ. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The February 2006 Dermatology Times article not describing Helioplex as a combination of avobenzone, oxybenzone and Hallbrite TQ, or a 2006 Neutrogena ingredient disclosure for Helioplex listing no oxybenzone.

Supergoop's product page for Unseen Sunscreen SPF 50 lists its active ingredients as avobenzone 3%, homosalate 7%, octisalate 5% and octocrylene 9%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Drug Facts panel on a current Unseen Sunscreen SPF 50 package lists different active ingredients or different percentages.

Kao's product page for Biore UV Aqua Rich Watery Essence lists the UV filter bemotrizinol under its Japanese ingredient name, ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence omitting ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン from its ingredient list.

Kao's product page labels Biore UV Aqua Rich Watery Essence SPF50+ (a high sun protection factor), PA++++ (a rating on Japan's UVA protection scale) and UV耐水性★★ (two stars for UV water resistance), and calls it a water base. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence showing an SPF label other than SPF50+, a PA rating other than PA++++, a UV water resistance mark other than two stars, or no water-base description.

Blue Lizard's Sensitive SPF 50 Mineral Sunscreen Lotion page lists Zinc Oxide 10% and Titanium Dioxide 8% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion page listing different active ingredients or different percentages.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

CivicScience's June 2023 survey of U.S. households found Coppertone the most favorable of six sunscreen brands at 58%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CivicScience's page dated June 20, 2023 names a different brand as most favorable, or gives Coppertone a figure other than 58%.

The FDA's 2011 sunscreen labeling rule says the broad spectrum test (the test for protection across both UVA and UVB rays) is a pass or fail test based on a critical wavelength value of 370 nm (nanometers, a measure of light wavelength). The same rule says FDA is not requiring a star rating or descriptors to indicate the level of UVA protection (protection from the longer wavelength UV rays). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current FDA sunscreen regulation or final rule that requires a numerical UVA protection factor or a UVA star rating on US sunscreen labels.

The European Commission's 2006 recommendation on sunscreen efficacy says a sunscreen's UVA protection factor (a measure of protection against UVA rays) should be 1/3 of its sun protection factor (SPF, the sunburn protection number), as obtained with the persistent pigment darkening method (a skin darkening test) as modified by the French health agency. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The text of Commission Recommendation 2006/647/EC point 10(b) stating a UVA protection factor threshold other than 1/3 of the sun protection factor.

Mineral, chemical & white cast

Mineral or chemical sunscreen: which leaves less white cast on dark skin?

All mineral sunscreens tested in a 2026 trial caused significant whitening that was 3 times more pronounced on darker skin tones, and tinted sunscreens use iron oxides and pigmentary titanium dioxide to protect against visible light.

In a 2026 randomized trial in the Journal of Drugs in Dermatology, controlled application of all tested mineral sunscreens caused significant whitening that was 3 times more pronounced on darker skin tones. A 2024 survey record at Touro Scholar found white cast concerns in 25% of the skin of color group, compared with 7% of the non-Hispanic White group.

If you prefer a mineral filter such as Colorescience Total Protection Face Shield Flex SPF 50 (12% zinc oxide), a 2020 Journal of the American Academy of Dermatology paper notes that tinted sunscreens blend iron oxides and pigmentary titanium dioxide to match skin tones while adding visible-light protection.

How Product.ai knows this5

A randomized trial published in the Journal of Drugs in Dermatology in 2026 reported that controlled application of all the mineral sunscreens it tested led to significant whitening, which was 3 times more pronounced on darker skin tones. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The trial's abstract reporting whitening on darker skin tones at a ratio other than 3 times, or reporting no significant whitening from the mineral sunscreens tested.

A 2024 survey record at Touro Scholar reports concerns about white cast (a pale, chalky residue left on skin) in 25% of the skin of color (SOC) group, against 7% of the non-Hispanic White (NHW) group. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The survey's published abstract reporting white cast concern percentages other than 25% for the skin of color group and 7% for the non-Hispanic White group.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

Skin type & outdoor sweat

Which sunscreen fits oily, acne-prone, sensitive, or heavy-sweat days?

The right sunscreen depends on whether you need a non-whitening formula on dark skin, a mineral lotion for reactive skin, or an 80-minute water-resistant coat for swimming and sweat.

Have a deeper skin tone or hate chalky white cast

What fits

Iron-oxide tinted mineral SPF (Colorescience Face Shield Flex SPF 50)

Why it fits

A 2026 Journal of Drugs in Dermatology trial found mineral sunscreens caused 3 times more pronounced whitening on darker skin tones, and 25% of skin of color respondents in a 2024 Touro Scholar survey cited white cast concerns versus 7% of non-Hispanic White respondents. Iron-oxide tints block visible light.

Have acne-prone, rosacea-prone, or oily skin

What fits

Coming soon

Have reactive or sensitive skin

What fits

Pure mineral zinc oxide and titanium dioxide lotions (Blue Lizard Sensitive SPF 50, CeraVe Hydrating Mineral SPF 50)

Why it fits

The American Academy of Dermatology notes that dermatologists recommend mineral sunscreens with zinc oxide, titanium dioxide, or both for people with sensitive skin. Blue Lizard Sensitive SPF 50 uses 10% zinc oxide and 8% titanium dioxide as its only listed active ingredients.

Swim, run, or sweat outdoors for hours

What fits

80-minute water-resistant SPF 50 to 100 lotions applied in two coats (Coppertone Sport, Neutrogena Ultra Sheer, La Roche-Posay Anthelios)

Why it fits

Applying two coats cuts missed skin from a median of 20% down to 9%, and high-SPF labels (SPF 70 and 100) still deliver actual SPFs of 19 and 27 at thin 0.5 mg/cm2 real-world coats.

Want high UVA protection against photoaging or melasma

What fits

PA++++ or photostabilized UVA formulas (Biore UV Aqua Rich PA++++, Colorescience Flex PA++++)

Why it fits

US Broad Spectrum is a pass-or-fail test at a 370 nm critical wavelength with no required UVA rating, whereas Japan's PA++++ requires an ISO 24442 in vivo UVA protection factor of 16 or higher and the EU recommends UVA protection at least 1/3 of labeled SPF. Modern triazine filter bemotrizinol (Tinosorb S) photostabilizes avobenzone and is now added to FDA's permitted active list.

Need a kids or baby mineral stick for quick face reapplication

What fits

Coming soon

Spend all day at high altitude or on snow and water

What fits

Coming soon

Want a powder or mist solely for over-makeup touch-ups

What fits

Coming soon
If you...What fitsWhy it fits
Have a deeper skin tone or hate chalky white castIron-oxide tinted mineral SPF (Colorescience Face Shield Flex SPF 50)

A 2026 Journal of Drugs in Dermatology trial found mineral sunscreens caused 3 times more pronounced whitening on darker skin tones, and 25% of skin of color respondents in a 2024 Touro Scholar survey cited white cast concerns versus 7% of non-Hispanic White respondents. Iron-oxide tints block visible light.

Have acne-prone, rosacea-prone, or oily skinComing soonComing soon
Have reactive or sensitive skinPure mineral zinc oxide and titanium dioxide lotions (Blue Lizard Sensitive SPF 50, CeraVe Hydrating Mineral SPF 50)
The American Academy of Dermatology notes that dermatologists recommend mineral sunscreens with zinc oxide, titanium dioxide, or both for people with sensitive skin.

Blue Lizard Sensitive SPF 50 uses 10% zinc oxide and 8% titanium dioxide as its only listed active ingredients.

Swim, run, or sweat outdoors for hours

80-minute water-resistant SPF 50 to 100 lotions applied in two coats (Coppertone Sport, Neutrogena Ultra Sheer, La Roche-Posay Anthelios)

Applying two coats cuts missed skin from a median of 20% down to 9%, and high-SPF labels (SPF 70 and 100) still deliver actual SPFs of 19 and 27 at thin 0.5 mg/cm2 real-world coats.

Want high UVA protection against photoaging or melasmaPA++++ or photostabilized UVA formulas (Biore UV Aqua Rich PA++++, Colorescience Flex PA++++)
US Broad Spectrum is a pass-or-fail test at a 370 nm critical wavelength with no required UVA rating, whereas Japan's PA++++ requires an ISO 24442 in vivo UVA protection factor of 16 or higher and the EU recommends UVA protection at least 1/3 of labeled SPF.

Modern triazine filter bemotrizinol (Tinosorb S) photostabilizes avobenzone and is now added to FDA's permitted active list.

Need a kids or baby mineral stick for quick face reapplicationComing soonComing soon
Spend all day at high altitude or on snow and waterComing soonComing soon
Want a powder or mist solely for over-makeup touch-upsComing soonComing soon
How Product.ai knows this26

A randomized trial published in the Journal of Drugs in Dermatology in 2026 reported that controlled application of all the mineral sunscreens it tested led to significant whitening, which was 3 times more pronounced on darker skin tones. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The trial's abstract reporting whitening on darker skin tones at a ratio other than 3 times, or reporting no significant whitening from the mineral sunscreens tested.

A 2024 survey record at Touro Scholar reports concerns about white cast (a pale, chalky residue left on skin) in 25% of the skin of color (SOC) group, against 7% of the non-Hispanic White (NHW) group. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The survey's published abstract reporting white cast concern percentages other than 25% for the skin of color group and 7% for the non-Hispanic White group.

Kao's product page for Biore UV Aqua Rich Watery Essence lists the UV filter bemotrizinol under its Japanese ingredient name, ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence omitting ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン from its ingredient list.

Kao's product page labels Biore UV Aqua Rich Watery Essence SPF50+ (a high sun protection factor), PA++++ (a rating on Japan's UVA protection scale) and UV耐水性★★ (two stars for UV water resistance), and calls it a water base. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence showing an SPF label other than SPF50+, a PA rating other than PA++++, a UV water resistance mark other than two stars, or no water-base description.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

EltaMD's product page says UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide (vitamin B3). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

EltaMD's product page stating a niacinamide percentage other than 5% for UV Clear Broad Spectrum SPF 46, or no longer naming niacinamide.

The drug label for EltaMD UV Clear SPF46 on DailyMed lists zinc oxide 9.0% and octinoxate 7.5% as the active ingredients, and lists cyclopentasiloxane, niacinamide and sodium hyaluronate among the inactive ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for EltaMD UV Clear SPF46 showing different active percentages or omitting cyclopentasiloxane, niacinamide or sodium hyaluronate from the inactive ingredients.

A 2007 study in the Journal of the American Academy of Dermatology assessed seven sunscreens. Subjects were significantly more likely (P < .05, meaning the difference was unlikely to be chance) to say they would use an alcohol-based spray sunscreen again than two of the seven sunscreens assessed. The study says it was endorsed as less greasy and less likely to leave a film, and that recommending alcohol-based spray sunscreens may increase patient compliance (people continuing to use the product). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The 2007 Journal of the American Academy of Dermatology study reporting no significant difference in willingness to reuse the alcohol-based spray sunscreen across the seven sunscreens assessed.

The American Academy of Dermatology says dermatologists recommend physical (mineral) sunscreens, whose active ingredient is titanium dioxide, zinc oxide or both, for people with sensitive skin. For infants and toddlers 6 months and older, it says sunscreens that use zinc oxide or titanium dioxide, or special sunscreens made for infants or toddlers, may cause less irritation to their sensitive skin. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The AAD sunscreen FAQ no longer carrying either sentence, or AAD guidance recommending a different kind of sunscreen for people with sensitive skin or for infants and toddlers 6 months and older.

Blue Lizard's product page for Sensitive Mineral Sunscreen Lotion SPF 50 calls it a mineral sunscreen and lists only zinc oxide 10% and titanium dioxide 8% as active ingredients (the ingredients that provide the sun protection). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product page's active ingredient list naming any ingredient besides zinc oxide and titanium dioxide, or giving different percentages.

Blue Lizard's Sensitive SPF 50 Mineral Sunscreen Lotion page lists Zinc Oxide 10% and Titanium Dioxide 8% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion page listing different active ingredients or different percentages.

The FDA says a sunscreen labeled water resistant must state on its label whether it remains effective for 40 minutes or 80 minutes when swimming or sweating. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An FDA page or rule permitting a labeled water resistance duration other than 40 or 80 minutes.

The U.S. Government Publishing Office text of FDA's sunscreen labeling rule requires a water resistant sunscreen's directions to say reapply after 40 minutes or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current text of 21 CFR 201.327(d)(3) omits the 'immediately after towel drying' reapplication direction or gives a water resistance duration other than 40 or 80 minutes.

A Cleveland Clinic Health Essentials article from June 2022 says the first step of using an oil-based cleanser is helpful for removing waterproof makeup and sunscreen. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Cleveland Clinic page no longer saying a first oil-based cleanse is helpful for removing waterproof makeup and sunscreen.

A 2014 paper in Photodermatology, Photoimmunology & Photomedicine says sunscreen under natural conditions is applied insufficiently, at about 0.39 to 1.0 mg/cm2 (milligrams of sunscreen per square centimeter of skin), which decreases the protection factor (the SPF) considerably. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

Measured consumer application studies finding typical amounts under natural conditions outside about 0.39 to 1.0 mg/cm2, or the paper no longer saying this decreases the protection factor.

In a 2012 study in the Journal of the American Academy of Dermatology, actual SPF (sun protection factor) rose in a straight line with the amount of sunscreen applied, and sunscreens labeled SPF 70 and above still provided significant protection at the low amounts consumers typically apply. Products labeled SPF 70 and 100 applied at 0.5 mg/cm2 (milligrams per square centimeter of skin) gave actual SPFs of 19 and 27. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's results reporting a non-linear relationship, or actual SPF values other than 19 and 27 for the SPF 70 and 100 products at 0.5 mg/cm2.

A 2007 British Journal of Dermatology study of an SPF 4 (sun protection factor) sunscreen on 20 healthy volunteers indicates the relation between SPF and sunscreen quantity follows exponential growth. It says declared SPF is based on 2 milligrams per square centimeter, and applying 1 or half a milligram makes the SPF fall as the square or fourth root, respectively. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's abstract reporting a linear rather than exponential relation between sunscreen quantity and SPF, or basing the declared SPF on a layer other than 2 milligrams per square centimeter.

In a PLOS ONE study by Heerfordt and colleagues, participants missed a median of 20% of their available body surface after a single sunscreen application and 9% after double application. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The PLOS ONE paper reporting a different median missed area than 20% after one application or 9% after double application.

CivicScience's June 2023 survey of U.S. households found Coppertone the most favorable of six sunscreen brands at 58%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CivicScience's page dated June 20, 2023 names a different brand as most favorable, or gives Coppertone a figure other than 58%.

The FDA's 2011 sunscreen labeling rule says the broad spectrum test (the test for protection across both UVA and UVB rays) is a pass or fail test based on a critical wavelength value of 370 nm (nanometers, a measure of light wavelength). The same rule says FDA is not requiring a star rating or descriptors to indicate the level of UVA protection (protection from the longer wavelength UV rays). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current FDA sunscreen regulation or final rule that requires a numerical UVA protection factor or a UVA star rating on US sunscreen labels.

The European Commission's 2006 recommendation on sunscreen efficacy says a sunscreen's UVA protection factor (a measure of protection against UVA rays) should be 1/3 of its sun protection factor (SPF, the sunburn protection number), as obtained with the persistent pigment darkening method (a skin darkening test) as modified by the French health agency. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The text of Commission Recommendation 2006/647/EC point 10(b) stating a UVA protection factor threshold other than 1/3 of the sun protection factor.

FDA's sunscreen page says FDA added bemotrizinol as a permitted active ingredient for use in sunscreens. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

FDA's sunscreen page or the OTC Monographs@FDA portal not listing bemotrizinol as a permitted sunscreen active ingredient.

Annex VI of EU Regulation 1223/2009, in the consolidated text of 18 May 2026, lists Terephthalylidene Dicamphor Sulfonic Acid (10% as acid), Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (10%) and Diethylamino Hydroxybenzoyl Hexyl Benzoate (10%) among the UV filters (sunscreen ingredients that absorb UV rays) allowed in cosmetic products. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A later consolidated Annex VI that removes one of these three entries or sets a different maximum concentration for it, including the as-acid basis for the first.

A 2021 survey in the International Journal of Women's Dermatology went to 218 dermatology trainees and faculty at hospitals affiliated with Harvard Medical School, and 77 took part (35.3% response rate). Its table of sunscreen brands those dermatologists most frequently recommended lists Neutrogena 37 (48%), Elta MD 27 (35.1%), CeraVe 17 (22.1%), La Roche-Posay 14 (18.2%) and Vanicream 9 (11.7%). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The paper's methods naming a different respondent count or a sample beyond Harvard Medical School affiliated hospitals, or its table of most frequently recommended sunscreen brands giving different counts or percentages for these brands.

Which sunscreen works for oily, acne-prone, or sensitive skin?

A 2007 study noted an alcohol-based spray sunscreen was endorsed as less greasy and less likely to leave a film, EltaMD UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide, and dermatologists recommend mineral sunscreens with zinc oxide, titanium dioxide, or both for people with sensitive skin.

EltaMD UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide, pairing 9.0% zinc oxide and 7.5% octinoxate with sodium hyaluronate and cyclopentasiloxane. In a 2007 Journal of the American Academy of Dermatology study of 7 sunscreens, subjects were significantly more likely (P < .05) to say they would reuse an alcohol-based spray sunscreen endorsed as less greasy and less likely to leave a film.

For sensitive skin, the American Academy of Dermatology says dermatologists recommend mineral sunscreens whose active ingredient is zinc oxide, titanium dioxide, or both. For infants and toddlers 6 months and older, it says sunscreens that use zinc oxide or titanium dioxide, or special sunscreens made for infants or toddlers, may cause less irritation to their sensitive skin. Blue Lizard Sensitive Mineral Sunscreen Lotion SPF 50 uses 10% zinc oxide and 8% titanium dioxide with zero chemical active ingredients, and CeraVe Hydrating Mineral Sunscreen Face Lotion SPF 50 pairs 9% titanium dioxide and 7% zinc oxide with three essential ceramides and niacinamide.

How Product.ai knows this7

EltaMD's product page says UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide (vitamin B3). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

EltaMD's product page stating a niacinamide percentage other than 5% for UV Clear Broad Spectrum SPF 46, or no longer naming niacinamide.

The drug label for EltaMD UV Clear SPF46 on DailyMed lists zinc oxide 9.0% and octinoxate 7.5% as the active ingredients, and lists cyclopentasiloxane, niacinamide and sodium hyaluronate among the inactive ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for EltaMD UV Clear SPF46 showing different active percentages or omitting cyclopentasiloxane, niacinamide or sodium hyaluronate from the inactive ingredients.

A 2007 study in the Journal of the American Academy of Dermatology assessed seven sunscreens. Subjects were significantly more likely (P < .05, meaning the difference was unlikely to be chance) to say they would use an alcohol-based spray sunscreen again than two of the seven sunscreens assessed. The study says it was endorsed as less greasy and less likely to leave a film, and that recommending alcohol-based spray sunscreens may increase patient compliance (people continuing to use the product). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The 2007 Journal of the American Academy of Dermatology study reporting no significant difference in willingness to reuse the alcohol-based spray sunscreen across the seven sunscreens assessed.

The American Academy of Dermatology says dermatologists recommend physical (mineral) sunscreens, whose active ingredient is titanium dioxide, zinc oxide or both, for people with sensitive skin. For infants and toddlers 6 months and older, it says sunscreens that use zinc oxide or titanium dioxide, or special sunscreens made for infants or toddlers, may cause less irritation to their sensitive skin. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The AAD sunscreen FAQ no longer carrying either sentence, or AAD guidance recommending a different kind of sunscreen for people with sensitive skin or for infants and toddlers 6 months and older.

Blue Lizard's product page for Sensitive Mineral Sunscreen Lotion SPF 50 calls it a mineral sunscreen and lists only zinc oxide 10% and titanium dioxide 8% as active ingredients (the ingredients that provide the sun protection). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product page's active ingredient list naming any ingredient besides zinc oxide and titanium dioxide, or giving different percentages.

Blue Lizard's Sensitive SPF 50 Mineral Sunscreen Lotion page lists Zinc Oxide 10% and Titanium Dioxide 8% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion page listing different active ingredients or different percentages.

CeraVe's page for Hydrating Mineral Sunscreen Face Lotion SPF 50 says the formula has three essential ceramides and niacinamide, and lists titanium dioxide 9% and zinc oxide 7% as the active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's page for this sunscreen no longer naming niacinamide or ceramides in the formula, or listing different active ingredients or percentages.

SPF numbers & UVA protection

How do you choose between SPF 30, 50, and 100 and check UVA protection?

Choosing a sunscreen comes down to four physical levers (filter chemistry, UVA depth beyond the US 370 nm floor, labeled SPF as a buffer against thin coats, and iron-oxide tints or 80-minute water resistance) while keeping common ingredient and SPF scares in proportion:

  1. Do you want mineral filters, organic filters, or a hybrid blend?

    Zinc oxide and titanium dioxide reflect only 4 to 5% of UV light and absorb the rest across their semiconductor band gap, whereas organic filters like avobenzone absorb UV photons chemically and rely on photostabilizers such as bemotrizinol (Tinosorb S) so they do not break down in sunlight.

  2. Does the bottle offer high UVA protection beyond the US 370 nm floor?

    The FDA's 2011 Broad Spectrum test is a pass-or-fail check at a 370 nm critical wavelength with no UVA star rating, whereas the European Commission recommends a UVA protection factor of at least 1/3 of the labeled SPF and Japan's PA++++ requires an in vivo ISO 24442 UVA protection factor of 16 or higher.

  3. What SPF number buffers thin real-world application?

    Because consumers typically apply only 0.39 to 1.0 mg/cm2 instead of the lab test coat (and miss a median of 20% of skin on a single coat versus 9% on a double coat), SPF drops sharply: at 0.5 mg/cm2, sunscreens labeled SPF 70 and 100 deliver actual SPFs of 19 and 27, while a 2007 study of an SPF 4 sunscreen on 20 healthy volunteers indicates that declared SPF is based on 2 mg/cm2 and applying 1 mg/cm2 or 0.5 mg/cm2 makes SPF fall as the square root or fourth root.

  4. Do you need 40-minute or 80-minute water resistance or visible-light iron oxides?

    For swimming or heavy sweat, look for an FDA 40-minute or 80-minute water resistance label; for melasma or hyperpigmentation, pick a tinted formula with iron oxides and pigmentary titanium dioxide, since clear nanoparticle zinc and titanium do not block visible light.

How Product.ai knows this14

A 2015 abstract in Photodermatology, Photoimmunology & Photomedicine reports that zinc oxide and titanium dioxide reflect only 4 to 5 percent of light across the UV range, and that the rest of the UV protection comes from the particles absorbing UV photons through their semiconductor band gap (the energy a particle needs to take in light). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A measurement of zinc oxide or titanium dioxide showing average UV reflectance well above 5 percent across the UV range.

A 2001 abstract in Photochemistry and Photobiology reports that Tinosorb S prevented the photodegradation (breakdown in sunlight) of avobenzone in a concentration-dependent way, meaning more Tinosorb S gave more protection. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An irradiation test in which adding Tinosorb S does not reduce avobenzone loss, or in which more Tinosorb S gives no further protection.

The FDA's 2011 sunscreen labeling rule says the broad spectrum test (the test for protection across both UVA and UVB rays) is a pass or fail test based on a critical wavelength value of 370 nm (nanometers, a measure of light wavelength). The same rule says FDA is not requiring a star rating or descriptors to indicate the level of UVA protection (protection from the longer wavelength UV rays). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current FDA sunscreen regulation or final rule that requires a numerical UVA protection factor or a UVA star rating on US sunscreen labels.

The European Commission's 2006 recommendation on sunscreen efficacy says a sunscreen's UVA protection factor (a measure of protection against UVA rays) should be 1/3 of its sun protection factor (SPF, the sunburn protection number), as obtained with the persistent pigment darkening method (a skin darkening test) as modified by the French health agency. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The text of Commission Recommendation 2006/647/EC point 10(b) stating a UVA protection factor threshold other than 1/3 of the sun protection factor.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

A 2014 paper in Photodermatology, Photoimmunology & Photomedicine says sunscreen under natural conditions is applied insufficiently, at about 0.39 to 1.0 mg/cm2 (milligrams of sunscreen per square centimeter of skin), which decreases the protection factor (the SPF) considerably. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

Measured consumer application studies finding typical amounts under natural conditions outside about 0.39 to 1.0 mg/cm2, or the paper no longer saying this decreases the protection factor.

In a 2012 study in the Journal of the American Academy of Dermatology, actual SPF (sun protection factor) rose in a straight line with the amount of sunscreen applied, and sunscreens labeled SPF 70 and above still provided significant protection at the low amounts consumers typically apply. Products labeled SPF 70 and 100 applied at 0.5 mg/cm2 (milligrams per square centimeter of skin) gave actual SPFs of 19 and 27. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's results reporting a non-linear relationship, or actual SPF values other than 19 and 27 for the SPF 70 and 100 products at 0.5 mg/cm2.

A 2007 British Journal of Dermatology study of an SPF 4 (sun protection factor) sunscreen on 20 healthy volunteers indicates the relation between SPF and sunscreen quantity follows exponential growth. It says declared SPF is based on 2 milligrams per square centimeter, and applying 1 or half a milligram makes the SPF fall as the square or fourth root, respectively. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's abstract reporting a linear rather than exponential relation between sunscreen quantity and SPF, or basing the declared SPF on a layer other than 2 milligrams per square centimeter.

In a PLOS ONE study by Heerfordt and colleagues, participants missed a median of 20% of their available body surface after a single sunscreen application and 9% after double application. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The PLOS ONE paper reporting a different median missed area than 20% after one application or 9% after double application.

The FDA says a sunscreen labeled water resistant must state on its label whether it remains effective for 40 minutes or 80 minutes when swimming or sweating. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An FDA page or rule permitting a labeled water resistance duration other than 40 or 80 minutes.

The U.S. Government Publishing Office text of FDA's sunscreen labeling rule requires a water resistant sunscreen's directions to say reapply after 40 minutes or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current text of 21 CFR 201.327(d)(3) omits the 'immediately after towel drying' reapplication direction or gives a water resistance duration other than 40 or 80 minutes.

A Cleveland Clinic Health Essentials article from June 2022 says the first step of using an oil-based cleanser is helpful for removing waterproof makeup and sunscreen. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Cleveland Clinic page no longer saying a first oil-based cleanse is helpful for removing waterproof makeup and sunscreen.

Does SPF 50 or SPF 100 protect better than SPF 30 in real life?

Yes: because almost everyone applies half or a quarter of the laboratory test thickness, starting with SPF 70 to SPF 100 or applying two coats leaves a much higher real-world SPF on skin.

Actual SPF delivered at a thin 0.5 mg/cm2 coat

Actual SPF delivered at 0.5 mg/cm2

Sunscreens labeled SPF 100applied at 0.5 mg/cm2
27 SPF
Sunscreens labeled SPF 70applied at 0.5 mg/cm2
19 SPF
0 SPF100 SPF

In a 2012 Journal of the American Academy of Dermatology study, sunscreens labeled SPF 100 and SPF 70 applied at 0.5 mg/cm2 delivered actual SPFs of 27 and 19.

Source check on Oct 16, 2026 · 2012 Journal of the American Academy of Dermatology study

Under 21 CFR 201.327, SPF is measured using the minimal erythema dose (MED), the smallest UV dose that produces perceptible skin redness with clearly defined borders at 16 to 24 hours after exposure. A 2014 paper in Photodermatology, Photoimmunology & Photomedicine reports that under natural conditions people apply only 0.39 to 1.0 mg/cm2 of sunscreen, which cuts the protection factor considerably.

A 2007 study in The British Journal of Dermatology of an SPF 4 sunscreen on 20 healthy volunteers indicates that the relation between SPF and sunscreen quantity follows exponential growth. It says declared SPF is based on 2 mg/cm2, and applying 1 mg/cm2 or 0.5 mg/cm2 makes SPF fall as the square root or fourth root, respectively. In a 2012 Journal of the American Academy of Dermatology study, actual SPF rose in a straight line with application density, and sunscreens labeled SPF 70 and 100 applied at 0.5 mg/cm2 delivered actual SPFs of 19 and 27. A 2018 PLOS ONE study by Heerfordt and colleagues also showed that participants missed a median of 20% of their available body surface after a single application, dropping to 9% after a double application.

How Product.ai knows this5

The FDA's sunscreen rule at 21 CFR 201.327 (the Code of Federal Regulations section on sunscreen labeling) defines the minimal erythema dose (MED) as the smallest UV dose that produces perceptible redness of the skin with clearly defined borders at 16 to 24 hours after UV exposure. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current text of 21 CFR 201.327 defining the minimal erythema dose as something other than the smallest UV dose that produces perceptible redness, or at a time other than 16 to 24 hours.

A 2014 paper in Photodermatology, Photoimmunology & Photomedicine says sunscreen under natural conditions is applied insufficiently, at about 0.39 to 1.0 mg/cm2 (milligrams of sunscreen per square centimeter of skin), which decreases the protection factor (the SPF) considerably. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

Measured consumer application studies finding typical amounts under natural conditions outside about 0.39 to 1.0 mg/cm2, or the paper no longer saying this decreases the protection factor.

In a 2012 study in the Journal of the American Academy of Dermatology, actual SPF (sun protection factor) rose in a straight line with the amount of sunscreen applied, and sunscreens labeled SPF 70 and above still provided significant protection at the low amounts consumers typically apply. Products labeled SPF 70 and 100 applied at 0.5 mg/cm2 (milligrams per square centimeter of skin) gave actual SPFs of 19 and 27. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's results reporting a non-linear relationship, or actual SPF values other than 19 and 27 for the SPF 70 and 100 products at 0.5 mg/cm2.

A 2007 British Journal of Dermatology study of an SPF 4 (sun protection factor) sunscreen on 20 healthy volunteers indicates the relation between SPF and sunscreen quantity follows exponential growth. It says declared SPF is based on 2 milligrams per square centimeter, and applying 1 or half a milligram makes the SPF fall as the square or fourth root, respectively. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's abstract reporting a linear rather than exponential relation between sunscreen quantity and SPF, or basing the declared SPF on a layer other than 2 milligrams per square centimeter.

In a PLOS ONE study by Heerfordt and colleagues, participants missed a median of 20% of their available body surface after a single sunscreen application and 9% after double application. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The PLOS ONE paper reporting a different median missed area than 20% after one application or 9% after double application.

How does US Broad Spectrum compare with European and PA++++ UVA ratings?

US Broad Spectrum only tests whether a sunscreen's critical wavelength reaches 370 nm, whereas European and Japanese PA++++ rules require UVA protection to scale with SPF or pass an in vivo UVA threshold.

In its 2011 final labeling rule, the FDA set the US Broad Spectrum test as a pass-or-fail check at a critical wavelength of 370 nm without requiring a star rating or descriptors for UVA strength. By contrast, the European Commission's 2006 recommendation specifies that a sunscreen's UVA protection factor should be at least 1/3 of its labeled SPF using the persistent pigment darkening method, and the Japan Cosmetic Industry Association's 2022 standard awards PA++++ only when the in vivo UVA protection factor measured under ISO 24442 is 16 or more.

Filter approval also shapes UVA performance. Annex VI of EU Regulation 1223/2009 (consolidated May 18, 2026) permits Terephthalylidene Dicamphor Sulfonic Acid (ecamsule, 10% as acid), Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (bemotrizinol or Tinosorb S, 10%), and Diethylamino Hydroxybenzoyl Hexyl Benzoate (Uvinul A Plus, 10%). A 2001 Photochemistry and Photobiology study showed that Tinosorb S prevented the sunlight breakdown of avobenzone in a concentration-dependent way, whereas older US formulas such as Neutrogena's 2006 Helioplex relied on oxybenzone and the solvent Hallbrite TQ. The FDA sunscreen page now notes that FDA added bemotrizinol as a permitted active ingredient for use in sunscreens.

How Product.ai knows this10

The FDA's 2011 sunscreen labeling rule says the broad spectrum test (the test for protection across both UVA and UVB rays) is a pass or fail test based on a critical wavelength value of 370 nm (nanometers, a measure of light wavelength). The same rule says FDA is not requiring a star rating or descriptors to indicate the level of UVA protection (protection from the longer wavelength UV rays). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current FDA sunscreen regulation or final rule that requires a numerical UVA protection factor or a UVA star rating on US sunscreen labels.

The European Commission's 2006 recommendation on sunscreen efficacy says a sunscreen's UVA protection factor (a measure of protection against UVA rays) should be 1/3 of its sun protection factor (SPF, the sunburn protection number), as obtained with the persistent pigment darkening method (a skin darkening test) as modified by the French health agency. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The text of Commission Recommendation 2006/647/EC point 10(b) stating a UVA protection factor threshold other than 1/3 of the sun protection factor.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

FDA's sunscreen page says FDA added bemotrizinol as a permitted active ingredient for use in sunscreens. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

FDA's sunscreen page or the OTC Monographs@FDA portal not listing bemotrizinol as a permitted sunscreen active ingredient.

Annex VI of EU Regulation 1223/2009, in the consolidated text of 18 May 2026, lists Terephthalylidene Dicamphor Sulfonic Acid (10% as acid), Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (10%) and Diethylamino Hydroxybenzoyl Hexyl Benzoate (10%) among the UV filters (sunscreen ingredients that absorb UV rays) allowed in cosmetic products. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A later consolidated Annex VI that removes one of these three entries or sets a different maximum concentration for it, including the as-acid basis for the first.

A 2001 abstract in Photochemistry and Photobiology reports that Tinosorb S prevented the photodegradation (breakdown in sunlight) of avobenzone in a concentration-dependent way, meaning more Tinosorb S gave more protection. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An irradiation test in which adding Tinosorb S does not reduce avobenzone loss, or in which more Tinosorb S gives no further protection.

CeraVe's own product page for Ultra-Light Moisturizing Lotion SPF 30 lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 2.7% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's product page for Ultra-Light Moisturizing Lotion SPF 30 lists a different set of active ingredients or omits avobenzone or octocrylene.

Dermatology Times reported in February 2006 that Helioplex is a proprietary combination of avobenzone, oxybenzone and a photostabilizing solvent (an ingredient that helps avobenzone resist breaking down in sunlight) called Hallbrite TQ. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The February 2006 Dermatology Times article not describing Helioplex as a combination of avobenzone, oxybenzone and Hallbrite TQ, or a 2006 Neutrogena ingredient disclosure for Helioplex listing no oxybenzone.

How do mineral filters and iron-oxide tints block UV and visible light?

Mineral zinc oxide and titanium dioxide protect skin mainly by absorbing UV photons across their semiconductor band gap rather than acting like mirrors, and require iron-oxide tints to block visible light.

A 2015 study in Photodermatology, Photoimmunology & Photomedicine measured the average UV reflectance of zinc oxide and titanium dioxide across the UV range at only 4 to 5% (less than SPF 2), showing that the rest of their UV protection comes from semiconductor band gap absorption of UV photons.

To make mineral lotions look less chalky, formulators shrink zinc oxide and titanium dioxide into nanoparticles, such as the 12% zinc oxide in Colorescience Total Protection Face Shield Flex SPF 50 (rated PA++++). However, a 2020 Journal of the American Academy of Dermatology article notes that nanoparticle zinc oxide and titanium dioxide do not protect against visible light; tinted sunscreens add iron oxides and pigmentary titanium dioxide to block visible light.

How Product.ai knows this4

A 2015 abstract in Photodermatology, Photoimmunology & Photomedicine reports that zinc oxide and titanium dioxide reflect only 4 to 5 percent of light across the UV range, and that the rest of the UV protection comes from the particles absorbing UV photons through their semiconductor band gap (the energy a particle needs to take in light). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A measurement of zinc oxide or titanium dioxide showing average UV reflectance well above 5 percent across the UV range.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

Active filters & daily cost

How do active filter formulas, US vs. overseas versions, and reapplication cost compare by brand?

A wrong sunscreen pick costs you either high per-ounce daily reapplication spend, an unused bottle that feels too chalky or greasy to wear, or a water resistant formula whose label states it remains effective for only 40 minutes instead of 80 minutes when swimming or sweating:

EltaMD

Active filters

UV Clear Broad Spectrum SPF 46 combines 9.0% zinc oxide and 7.5% octinoxate with 5% niacinamide.

Size, price, or rating

Listed at $46.00 for 1.7 oz ($27.06/oz) or $78.00 for 3.7 oz ($21.08/oz) on EltaMD's online store on October 16, 2026.

Storage, recall, or wear rule

FDA rules require protecting bottles from excessive heat and direct sun, and treat undated bottles as expired 3 years after purchase.

La Roche-Posay

Active filters

US Anthelios Face Light Fluid lists 3% avobenzone, 10% homosalate, 5% octisalate, and 7% octocrylene on DailyMed.

Size, price, or rating

European Anthelios UVMune 400 launched in March 2022 in Invisible Fluid SPF 50+ and Hydrating Cream SPF 50+, alongside US FDA application 021502 Anthelios SX.

Storage, recall, or wear rule

Water-resistant labels must state 40 or 80 minutes of swimming or sweating under FDA rules.

Biore UV

Active filters

Kao's Japanese UV Aqua Rich Watery Essence uses bemotrizinol in a water base.

Size, price, or rating

Rated SPF 50+ and PA++++ in Japan.

Storage, recall, or wear rule

Must be protected from excessive heat and direct sun under FDA labeling rules.

Supergoop

Active filters

Unseen Sunscreen SPF 50 lists 3% avobenzone, 7% homosalate, 5% octisalate, and 9% octocrylene.

Size, price, or rating

Coming soon

Storage, recall, or wear rule

Undated bottles expire 3 years after purchase, and in a lab study of 22 sunscreens spread on plastic wrap placed on a UV light after 18 to 24 hours of storage, those stored at 50°C blocked 64.8% of UV light and those stored at -10°C blocked 74%.

Colorescience

Active filters

Total Protection Face Shield Flex SPF 50 uses 12% zinc oxide with iron-oxide pigments for visible light.

Size, price, or rating

Carries a PA++++ UVA rating (in vivo UVA protection factor of 16 or higher under ISO 24442).

Storage, recall, or wear rule

Nanoparticle zinc and titanium alone do not block visible light without iron-oxide and pigmentary titanium tints.

Blue Lizard

Active filters

Sensitive SPF 50 Mineral Sunscreen Lotion uses 10% zinc oxide and 8% titanium dioxide as its only listed active ingredients.

Size, price, or rating

Broad Spectrum SPF 50 mineral lotion.

Storage, recall, or wear rule

Must be protected from excessive heat and direct sun under FDA labeling rules.

CeraVe

Active filters

Hydrating Mineral Face Lotion SPF 50 uses 9% titanium dioxide and 7% zinc oxide with three essential ceramides and niacinamide; Ultra-Light SPF 30 uses 3% avobenzone, 10% homosalate, 5% octisalate, and 2.7% octocrylene.

Size, price, or rating

Broad Spectrum SPF 50 mineral face lotion and SPF 30 daily chemical lotion.

Storage, recall, or wear rule

Undated containers expire 3 years after purchase under FDA guidance.

Neutrogena

Active filters

Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55 lists 3% avobenzone, 10% homosalate, 5% octisalate, and 10% octocrylene on DailyMed.

Size, price, or rating

Ranked first among the sunscreen brands most frequently recommended in a 2021 survey of 77 dermatology faculty and trainees at hospitals affiliated with Harvard Medical School at 48% (37 respondents).

Storage, recall, or wear rule

Johnson & Johnson's July 14, 2021 voluntary benzene recall affected only aerosol sunscreen products, not lotions.

Coppertone

Active filters

Coppertone Sport lotion lists 3% avobenzone, 15% homosalate, 5% octisalate, and 10% octocrylene on DailyMed.

Size, price, or rating

Ranked most favorable of six sunscreen brands at 58% in a June 2023 CivicScience US household survey.

Storage, recall, or wear rule

Water-resistant sunscreens must state 40 or 80 minutes on the label and require reapplication after swimming, sweating, or towel drying.

How Product.ai knows this25

Kao's product page for Biore UV Aqua Rich Watery Essence lists the UV filter bemotrizinol under its Japanese ingredient name, ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence omitting ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン from its ingredient list.

Kao's product page labels Biore UV Aqua Rich Watery Essence SPF50+ (a high sun protection factor), PA++++ (a rating on Japan's UVA protection scale) and UV耐水性★★ (two stars for UV water resistance), and calls it a water base. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Kao product page for Biore UV Aqua Rich Watery Essence showing an SPF label other than SPF50+, a PA rating other than PA++++, a UV water resistance mark other than two stars, or no water-base description.

Blue Lizard's Sensitive SPF 50 Mineral Sunscreen Lotion page lists Zinc Oxide 10% and Titanium Dioxide 8% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion page listing different active ingredients or different percentages.

Blue Lizard's product page for Sensitive Mineral Sunscreen Lotion SPF 50 calls it a mineral sunscreen and lists only zinc oxide 10% and titanium dioxide 8% as active ingredients (the ingredients that provide the sun protection). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product page's active ingredient list naming any ingredient besides zinc oxide and titanium dioxide, or giving different percentages.

CeraVe's page for Hydrating Mineral Sunscreen Face Lotion SPF 50 says the formula has three essential ceramides and niacinamide, and lists titanium dioxide 9% and zinc oxide 7% as the active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's page for this sunscreen no longer naming niacinamide or ceramides in the formula, or listing different active ingredients or percentages.

CeraVe's own product page for Ultra-Light Moisturizing Lotion SPF 30 lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 2.7% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

CeraVe's product page for Ultra-Light Moisturizing Lotion SPF 30 lists a different set of active ingredients or omits avobenzone or octocrylene.

Dermatology Times reported in February 2006 that Helioplex is a proprietary combination of avobenzone, oxybenzone and a photostabilizing solvent (an ingredient that helps avobenzone resist breaking down in sunlight) called Hallbrite TQ. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The February 2006 Dermatology Times article not describing Helioplex as a combination of avobenzone, oxybenzone and Hallbrite TQ, or a 2006 Neutrogena ingredient disclosure for Helioplex listing no oxybenzone.

Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.

The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.

A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.

The DailyMed label for La Roche-Posay Anthelios Face Light Fluid Sunscreen, filed by L'Oreal USA Products Inc, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 7% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for this product listing a different active ingredient or a different percentage.

L'Oréal's press release of 24 May 2022 says Anthelios UVMune 400 was launched in pharmacies in March 2022 and was available at that time as either an Invisible Fluid SPF50+ or a Hydrating Cream SPF50+ (SPF is sun protection factor). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The release naming a different launch month or year for Anthelios UVMune 400, or a product format other than Invisible Fluid SPF50+ and Hydrating Cream SPF50+.

The DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55, filed by Kenvue Brands LLC, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 10% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55 listing a different active ingredient or percentage.

The DailyMed label for Coppertone Sport Sunscreen lotion, filed by Beiersdorf Inc, lists avobenzone 3%, homosalate 15%, octisalate 5% and octocrylene 10% as its active ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for Coppertone Sport Sunscreen lotion listing a different active ingredient or percentage.

The FDA says a sunscreen labeled water resistant must state on its label whether it remains effective for 40 minutes or 80 minutes when swimming or sweating. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An FDA page or rule permitting a labeled water resistance duration other than 40 or 80 minutes.

The U.S. Government Publishing Office text of FDA's sunscreen labeling rule requires a water resistant sunscreen's directions to say reapply after 40 minutes or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current text of 21 CFR 201.327(d)(3) omits the 'immediately after towel drying' reapplication direction or gives a water resistance duration other than 40 or 80 minutes.

A Cleveland Clinic Health Essentials article from June 2022 says the first step of using an oil-based cleanser is helpful for removing waterproof makeup and sunscreen. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Cleveland Clinic page no longer saying a first oil-based cleanse is helpful for removing waterproof makeup and sunscreen.

On 16 October 2026, EltaMD's own online store listed UV Clear Broad Spectrum SPF 46 at $46.00 for the 1.7 oz size and $78.00 for the 3.7 oz size. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

A dated copy of EltaMD's store listing for UV Clear Broad Spectrum SPF 46 from 16 October 2026 showing a price other than $46.00 for the 1.7 oz size or $78.00 for the 3.7 oz size.

EltaMD's product page says UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide (vitamin B3). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

EltaMD's product page stating a niacinamide percentage other than 5% for UV Clear Broad Spectrum SPF 46, or no longer naming niacinamide.

The drug label for EltaMD UV Clear SPF46 on DailyMed lists zinc oxide 9.0% and octinoxate 7.5% as the active ingredients, and lists cyclopentasiloxane, niacinamide and sodium hyaluronate among the inactive ingredients. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current DailyMed label for EltaMD UV Clear SPF46 showing different active percentages or omitting cyclopentasiloxane, niacinamide or sodium hyaluronate from the inactive ingredients.

A 2007 study in the Journal of the American Academy of Dermatology assessed seven sunscreens. Subjects were significantly more likely (P < .05, meaning the difference was unlikely to be chance) to say they would use an alcohol-based spray sunscreen again than two of the seven sunscreens assessed. The study says it was endorsed as less greasy and less likely to leave a film, and that recommending alcohol-based spray sunscreens may increase patient compliance (people continuing to use the product). source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The 2007 Journal of the American Academy of Dermatology study reporting no significant difference in willingness to reuse the alcohol-based spray sunscreen across the seven sunscreens assessed.

Johnson & Johnson Consumer Inc. said on July 14, 2021 that its internal testing found low levels of benzene in some samples and that the only sunscreen products affected by its voluntary recall were aerosol products. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The July 14, 2021 release names non-aerosol sunscreen products in the recall or attributes the detection to a party other than the company's internal testing.

Supergoop's product page for Unseen Sunscreen SPF 50 lists its active ingredients as avobenzone 3%, homosalate 7%, octisalate 5% and octocrylene 9%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Drug Facts panel on a current Unseen Sunscreen SPF 50 package lists different active ingredients or different percentages.

The U.S. Food and Drug Administration says sunscreen labels must tell buyers to protect the product in its container from excessive heat and direct sun, and that a sunscreen product without an expiration date should be considered expired three years after purchase. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The FDA page dropping the required heat-and-sun label statement or stating a horizon other than three years for an undated sunscreen.

A lab study by Spencer and Young in the Journal of Emerging Investigators tested 22 sunscreens by spreading them on plastic wrap placed on an ultraviolet (UV) light, after storing them for 18 to 24 hours at temperatures from -10°C to 50°C. Sunscreens stored at 50°C blocked 64.8% of UV light, and those stored at -10°C blocked 74%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's abstract giving a count other than 22 sunscreens, a storage period other than 18 to 24 hours, or equal or higher UV blocking for sunscreens stored at 50 degrees Celsius than for those stored at minus 10 degrees.

Does sunscreen expire, how often do you reapply, and how do you wash it off?

FDA rules treat an undated sunscreen as expired 3 years after purchase, require reapplication at least every 2 hours (and after 40 or 80 minutes of swimming or sweating), and warn against high heat.

The FDA states that sunscreen labels must instruct buyers to protect the container from excessive heat and direct sun, and that any bottle without an expiration date should be considered expired 3 years after purchase. A Journal of Emerging Investigators lab study by Spencer and Young tested 22 sunscreens by spreading them on plastic wrap placed on a UV light after storing them for 18 to 24 hours at temperatures from -10°C to 50°C. Sunscreens stored at 50°C blocked 64.8% of UV light, and those stored at -10°C blocked 74%. On contamination recalls, Johnson & Johnson Consumer Inc. stated on July 14, 2021 that internal testing identified low levels of benzene in some samples and that only aerosol sunscreen products were impacted by its voluntary recall.

Under 21 CFR 201.327, water-resistant sunscreens must state whether they remain effective for 40 minutes or 80 minutes in water, and labels must direct users to reapply after 40 or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours. A June 2022 Cleveland Clinic article notes that starting with an oil-based cleanser helps remove waterproof sunscreen. Finally, if you travel to Hawaii, state law effective January 1, 2021 prohibits selling sunscreens containing oxybenzone or octinoxate without a clinician's prescription.

How Product.ai knows this7

The U.S. Food and Drug Administration says sunscreen labels must tell buyers to protect the product in its container from excessive heat and direct sun, and that a sunscreen product without an expiration date should be considered expired three years after purchase. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The FDA page dropping the required heat-and-sun label statement or stating a horizon other than three years for an undated sunscreen.

A lab study by Spencer and Young in the Journal of Emerging Investigators tested 22 sunscreens by spreading them on plastic wrap placed on an ultraviolet (UV) light, after storing them for 18 to 24 hours at temperatures from -10°C to 50°C. Sunscreens stored at 50°C blocked 64.8% of UV light, and those stored at -10°C blocked 74%. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The study's abstract giving a count other than 22 sunscreens, a storage period other than 18 to 24 hours, or equal or higher UV blocking for sunscreens stored at 50 degrees Celsius than for those stored at minus 10 degrees.

The FDA says a sunscreen labeled water resistant must state on its label whether it remains effective for 40 minutes or 80 minutes when swimming or sweating. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

An FDA page or rule permitting a labeled water resistance duration other than 40 or 80 minutes.

The U.S. Government Publishing Office text of FDA's sunscreen labeling rule requires a water resistant sunscreen's directions to say reapply after 40 minutes or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The current text of 21 CFR 201.327(d)(3) omits the 'immediately after towel drying' reapplication direction or gives a water resistance duration other than 40 or 80 minutes.

A Cleveland Clinic Health Essentials article from June 2022 says the first step of using an oil-based cleanser is helpful for removing waterproof makeup and sunscreen. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The Cleveland Clinic page no longer saying a first oil-based cleanse is helpful for removing waterproof makeup and sunscreen.

The Legislature of the State of Hawaii made it unlawful, beginning January 1, 2021, to sell, offer for sale, or distribute for sale in the state any sunscreen that contains oxybenzone or octinoxate without a prescription issued by a licensed healthcare provider. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The enacted text of Act 104 (HRS 342D) names different chemicals, a different start date, or no prescription exception.

Johnson & Johnson Consumer Inc. said on July 14, 2021 that its internal testing found low levels of benzene in some samples and that the only sunscreen products affected by its voluntary recall were aerosol products. source

Checked by Product.ai on 2026-10-16

What would prove this wrong

The July 14, 2021 release names non-aerosol sunscreen products in the recall or attributes the detection to a party other than the company's internal testing.

Questions coming soon

Shoppers ask these questions too, and they are in the Product.ai research queue for source checking, so this page does not answer them yet.

  • Do chemical sunscreen filters absorb into the bloodstream above the FDA threshold?
  • Does wearing daily sunscreen cause vitamin D deficiency?
  • Do sunscreen sticks and setting powders deliver their labeled SPF?
  • Why does sunscreen pill over moisturizer or under foundation?
  • Which sunscreens are recommended during pregnancy or for babies under 6 months?
  • How do UPF sun shirts and oral Polypodium leucotomos compare with topical SPF?
  • How does Sun Bum compare with other drugstore sunscreens?

How this page knows

How findings on this page were made and checked

Product.ai builds each guide from a verified product database. Powered by the Axioms.ai Verification Engine, it turns a category into small, testable findings. The aim is that each finding rests on a primary source, which is the party that issued the fact, and carries a falsifier, which is the result that would prove the finding wrong so a reader can test it. Each page says how far it meets that aim. Powered by Axioms.ai: read how findings are checked

  1. 1

    Primary-source evidence

    The aim is that each finding rests on a primary source, which is the party that issued the fact. Each page says how far it meets that aim.

    Sources include FDA labeling rules (21 CFR 201.327 and 352.50), ISO 24443 and 24444 standards, peer-reviewed dermatology studies, and brand ingredient disclosures.
  2. 2

    Source check

    When a source check runs, it traces each finding's numbers and mechanism to its cited source. Partial findings show only the part the source supports.

    Product.ai checked the 27 findings on this page against their sources on October 16, 2026, and 27 passed the source check.
  3. 3

    Falsifier and open gaps

    Findings carry the result that would prove them wrong so a reader can test them. Questions the record cannot answer are listed as not yet answered instead of guessed.

    All 27 findings name what would prove them wrong, and 7 questions shoppers ask are not yet answered on this page.
Last source check
October 16, 2026
Open questions and brands
7 questions not yet answered; 1 more brand not yet checked
Links and payment
This page has no affiliate links.
Every finding below is tied to a published clinical trial, federal drug monograph, DailyMed drug label, or manufacturer ingredient disclosure checked as of October 2026.

Numbered sources

  1. 1Journal of Drugs in Dermatology 2026 randomized trial; Touro Scholar 2024 survey (checked Oct 16, 2026).
  2. 2American Academy of Dermatology (checked Oct 16, 2026).
  3. 3U.S. Food and Drug Administration 2011 rule and water-resistance guidance; European Commission 2006/647/EC; Japan Cosmetic Industry Association ISO 24442 (checked Oct 16, 2026).
  4. 4Photodermatology, Photoimmunology & Photomedicine 2014; Journal of the American Academy of Dermatology 2012; PLOS ONE 2018 (checked Oct 16, 2026).

Method notes from this page

Every finding below is tied to a published clinical trial, federal drug monograph, DailyMed drug label, or manufacturer ingredient disclosure checked as of October 2026.

Where two regions test UVA protection under different rules, such as the US 370 nm pass-or-fail test versus European and Japanese UVA protection factor thresholds, both test methods are named.

Questions where primary-source evidence is still in the research queue are marked as coming soon rather than guessed.

Sources & check record

43 checked readings behind this page, each a dated passage from a cited source

Source check on Oct 16, 2026 · Zero affiliate links

Sources & check record

Sources & check record

43 checked readings behind this page, sourced and dated

Each row is one checked reading with its source link, quote, who checked it and when, its falsifier, and the parts of this page that cite it.

ReadingSourceQuoteCheck recordWhat would prove this wrongResearch areaCited in
A randomized trial published in the Journal of Drugs in Dermatology in 2026 reported that controlled application of all the mineral sunscreens it tested led to significant whitening, which was 3 times more pronounced on darker skin tones.Journal of Drugs in Dermatology (2026-05-31)“Controlled application with all mineral sunscreens led to significant whitening, which was 3 times more pronounced on darker skin tones.”Checked by Product.ai on 2026-10-16The trial's abstract reporting whitening on darker skin tones at a ratio other than 3 times, or reporting no significant whitening from the mineral sunscreens tested.Research area Primary source readingCited in The category answer, Skin type & outdoor sweat, Mineral, chemical & white cast
A 2024 survey record at Touro Scholar reports concerns about white cast (a pale, chalky residue left on skin) in 25% of the skin of color (SOC) group, against 7% of the non-Hispanic White (NHW) group.Touro Scholar (2024-06-01)“concerns about white cast (7% NHW vs 25% SOC)”Checked by Product.ai on 2026-10-16The survey's published abstract reporting white cast concern percentages other than 25% for the skin of color group and 7% for the non-Hispanic White group.Research area Primary source readingCited in Skin type & outdoor sweat, Mineral, chemical & white cast
Kao's product page for Biore UV Aqua Rich Watery Essence lists the UV filter bemotrizinol under its Japanese ingredient name, ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン.花王株式会社 (Kao Corporation), Kao きれいナビ product page (undated)“ジエチルアミノヒドロキシベンゾイル安息香酸ヘキシル、ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン、パルミチン酸デキストリン”Checked by Product.ai on 2026-10-16The Kao product page for Biore UV Aqua Rich Watery Essence omitting ビスエチルヘキシルオキシフェノールメトキシフェニルトリアジン from its ingredient list.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Active filters & daily cost
Kao's product page labels Biore UV Aqua Rich Watery Essence SPF50+ (a high sun protection factor), PA++++ (a rating on Japan's UVA protection scale) and UV耐水性★★ (two stars for UV water resistance), and calls it a water base.花王株式会社 (Kao Corporation), Kao きれいナビ product page (undated)“ビオレ UV アクアリッチ ウォータリーエッセンス ... ウォーターベース ... SPF50+/PA++++。UV耐水性★★。”Checked by Product.ai on 2026-10-16The Kao product page for Biore UV Aqua Rich Watery Essence showing an SPF label other than SPF50+, a PA rating other than PA++++, a UV water resistance mark other than two stars, or no water-base description.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Active filters & daily cost
Colorescience's product page for Total Protection Face Shield Flex SPF 50 lists zinc oxide 12% as an active ingredient and gives the product a PA++++ rating (a UVA protection rating used in Japan and other markets).Colorescience (undated)“Total Protection™ Face Shield Flex SPF 50 has a PA++++ rating. ... Zinc Oxide 12%”Checked by Product.ai on 2026-10-16The product's Drug Facts label or current product page listing a different zinc oxide percentage, or no PA++++ rating.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Mineral, chemical & white cast, SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?, How do mineral filters and iron-oxide tints block UV and visible light?, Active filters & daily cost
The Japan Cosmetic Industry Association's UVA standard rates a sunscreen PA++++ (a rating on Japan's UVA protection scale) when its UVA protection factor, measured in vivo (on human skin) under ISO 24442 (an international test method), is 16 or more.Japan Cosmetic Industry Association (2022-09-01)“Measurements shall be carried out based on ISO 24442 Cosmetics ― Sun protection test methods ― In vivo determination of sunscreen UVA protection. ... 16 or more PA++++”Checked by Product.ai on 2026-10-16A current JCIA notification that sets the PA++++ threshold at a value other than 16 or names a method other than ISO 24442 in vivo testing.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Mineral, chemical & white cast, SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?, How do mineral filters and iron-oxide tints block UV and visible light?, Active filters & daily cost
A 2020 article in the Journal of the American Academy of Dermatology says zinc oxide and titanium dioxide nanoparticles (tiny particles used so the sunscreen looks less chalky) do not protect against visible light, and that tinted sunscreens use iron oxides and pigmentary titanium dioxide (the pigment form rather than the clear nanoparticle form) to provide protection against visible light.Journal of the American Academy of Dermatology (2020-04-23)“are used in the form of nanoparticles in sunscreens to minimize the chalky and white appearance on the skin ... they do not protect against visible light ... Tinted sunscreens use different formulations and concentrations of iron oxides and pigmentary titanium dioxide ... to provide protection against visible light”Checked by Product.ai on 2026-10-16A published measurement showing an untinted nanoparticle zinc oxide or titanium dioxide sunscreen attenuating visible light as much as a tinted one.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Mineral, chemical & white cast, SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?, How do mineral filters and iron-oxide tints block UV and visible light?, Active filters & daily cost
EltaMD's product page says UV Clear Broad Spectrum SPF 46 is formulated with 5% niacinamide (vitamin B3).EltaMD (2026-08-27)“EltaMD UV Clear Broad Spectrum SPF 46 is formulated with 5% Niacinamide (Vitamin B3)”Checked by Product.ai on 2026-10-16EltaMD's product page stating a niacinamide percentage other than 5% for UV Clear Broad Spectrum SPF 46, or no longer naming niacinamide.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
The drug label for EltaMD UV Clear SPF46 on DailyMed lists zinc oxide 9.0% and octinoxate 7.5% as the active ingredients, and lists cyclopentasiloxane, niacinamide and sodium hyaluronate among the inactive ingredients.DailyMed, U.S. National Library of Medicine (label filed by CP Skin Health Group, Inc.) (2025-06-04)“Zinc Oxide 9.0% Sunscreen Octinoxate 7.5% Sunscreen ... Inactive Ingredients Purified water, Cyclopentasiloxane, Niacinamide, ... Sodium Hyaluronate, Tocopheryl Acetate, ...”Checked by Product.ai on 2026-10-16The current DailyMed label for EltaMD UV Clear SPF46 showing different active percentages or omitting cyclopentasiloxane, niacinamide or sodium hyaluronate from the inactive ingredients.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
A 2007 study in the Journal of the American Academy of Dermatology assessed seven sunscreens. Subjects were significantly more likely (P < .05, meaning the difference was unlikely to be chance) to say they would use an alcohol-based spray sunscreen again than two of the seven sunscreens assessed. The study says it was endorsed as less greasy and less likely to leave a film, and that recommending alcohol-based spray sunscreens may increase patient compliance (people continuing to use the product).Journal of the American Academy of Dermatology (record read via Europe PMC) (2007)“Subjects were significantly more likely to indicate that they would use alcohol-based spray sunscreen again than two of the seven sunscreens assessed (P < .05). This sunscreen was endorsed as being less greasy, less likely to leave a film ... Recommendations to use alcohol-based spray sunscreens may increase patient compliance.”Checked by Product.ai on 2026-10-16The 2007 Journal of the American Academy of Dermatology study reporting no significant difference in willingness to reuse the alcohol-based spray sunscreen across the seven sunscreens assessed.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
The American Academy of Dermatology says dermatologists recommend physical (mineral) sunscreens, whose active ingredient is titanium dioxide, zinc oxide or both, for people with sensitive skin. For infants and toddlers 6 months and older, it says sunscreens that use zinc oxide or titanium dioxide, or special sunscreens made for infants or toddlers, may cause less irritation to their sensitive skin.American Academy of Dermatology (2025-02-11)“titanium dioxide, zinc oxide, or both, you have a physical sunscreen. Dermatologists recommend physical sunscreens, also called mineral sunscreens, for people with sensitive skin. ... infants and toddlers 6 months and older ... Sunscreens that use the ingredients zinc oxide or titanium dioxide, or special sunscreens made for infants or toddlers, may cause less irritation to their sensitive skin.”Checked by Product.ai on 2026-10-16The AAD sunscreen FAQ no longer carrying either sentence, or AAD guidance recommending a different kind of sunscreen for people with sensitive skin or for infants and toddlers 6 months and older.Research area Primary source readingCited in Skin type & outdoor sweat, Which sunscreen works for oily, acne-prone, or sensitive skin?
Blue Lizard's product page for Sensitive Mineral Sunscreen Lotion SPF 50 calls it a mineral sunscreen and lists only zinc oxide 10% and titanium dioxide 8% as active ingredients (the ingredients that provide the sun protection).Blue Lizard Australian Sunscreen (Crown Laboratories Inc., a Revance Company) (undated)“This mineral sunscreen with Zinc Oxide and Titanium Dioxide ... ACTIVE INGREDIENTS Zinc Oxide 10% Titanium Dioxide 8% INACTIVE INGREDIENTS”Checked by Product.ai on 2026-10-16The product page's active ingredient list naming any ingredient besides zinc oxide and titanium dioxide, or giving different percentages.Research area Primary source readingCited in Skin type & outdoor sweat, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
Blue Lizard's Sensitive SPF 50 Mineral Sunscreen Lotion page lists Zinc Oxide 10% and Titanium Dioxide 8% as its active ingredients.Blue Lizard (undated)“Zinc Oxide 10% ... Titanium Dioxide 8%”Checked by Product.ai on 2026-10-16The Blue Lizard Sensitive SPF 50 Mineral Sunscreen Lotion page listing different active ingredients or different percentages.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
The FDA says a sunscreen labeled water resistant must state on its label whether it remains effective for 40 minutes or 80 minutes when swimming or sweating.U.S. Food and Drug Administration (2026-10-16)“Products labeled as water resistant are also required to state on their labels whether the sunscreen remains effective for 40 minutes or 80 minutes when swimming or sweating.”Checked by Product.ai on 2026-10-16An FDA page or rule permitting a labeled water resistance duration other than 40 or 80 minutes.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
The U.S. Government Publishing Office text of FDA's sunscreen labeling rule requires a water resistant sunscreen's directions to say reapply after 40 minutes or 80 minutes of swimming or sweating, immediately after towel drying, and at least every 2 hours.U.S. Government Publishing Office, Code of Federal Regulations (FDA, 21 CFR 201.327) (2024)“[Bullet] after [select one of the following determined by water resistance test: '40 minutes of' or '80 minutes of'] swimming or sweating [bullet] immediately after towel drying [bullet] at least every 2 hours”Checked by Product.ai on 2026-10-16The current text of 21 CFR 201.327(d)(3) omits the 'immediately after towel drying' reapplication direction or gives a water resistance duration other than 40 or 80 minutes.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
A Cleveland Clinic Health Essentials article from June 2022 says the first step of using an oil-based cleanser is helpful for removing waterproof makeup and sunscreen.Cleveland Clinic, Health Essentials (2022-06-21)“The first step of using an oil-based cleanser is helpful when it comes to removing waterproof makeup and sunscreen.”Checked by Product.ai on 2026-10-16The Cleveland Clinic page no longer saying a first oil-based cleanse is helpful for removing waterproof makeup and sunscreen.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
A 2014 paper in Photodermatology, Photoimmunology & Photomedicine says sunscreen under natural conditions is applied insufficiently, at about 0.39 to 1.0 mg/cm2 (milligrams of sunscreen per square centimeter of skin), which decreases the protection factor (the SPF) considerably.Photodermatology, Photoimmunology & Photomedicine (2014)“investigations show that sunscreen under natural conditions is applied insufficiently with amounts about 0.39 to 1.0 mg/cm(2) , which decreases the protection factor considerably.”Checked by Product.ai on 2026-10-16Measured consumer application studies finding typical amounts under natural conditions outside about 0.39 to 1.0 mg/cm2, or the paper no longer saying this decreases the protection factor.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Does SPF 50 or SPF 100 protect better than SPF 30 in real life?
In a 2012 study in the Journal of the American Academy of Dermatology, actual SPF (sun protection factor) rose in a straight line with the amount of sunscreen applied, and sunscreens labeled SPF 70 and above still provided significant protection at the low amounts consumers typically apply. Products labeled SPF 70 and 100 applied at 0.5 mg/cm2 (milligrams per square centimeter of skin) gave actual SPFs of 19 and 27.Journal of the American Academy of Dermatology (2012-03-30)“There was a linear relationship between application density and the actual SPF; sunscreens with labeled SPF values of 70 and above provided significant protection, even at the low application densities typically applied by consumers. Sunscreens labeled SPF 70 and 100 applied at 0.5 mg/cm(2) provided an actual SPF value of, respectively, 19 and 27.”Checked by Product.ai on 2026-10-16The study's results reporting a non-linear relationship, or actual SPF values other than 19 and 27 for the SPF 70 and 100 products at 0.5 mg/cm2.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Does SPF 50 or SPF 100 protect better than SPF 30 in real life?
A 2007 British Journal of Dermatology study of an SPF 4 (sun protection factor) sunscreen on 20 healthy volunteers indicates the relation between SPF and sunscreen quantity follows exponential growth. It says declared SPF is based on 2 milligrams per square centimeter, and applying 1 or half a milligram makes the SPF fall as the square or fourth root, respectively.The British Journal of Dermatology (2007-04-01)“declared sun protection factor (SPF) is based on ... 2 mg cm(-2) ... 20 healthy volunteers ... a sunscreen SPF 4 ... This study indicates that the relation between SPF and sunscreen quantity follows exponential growth. Application of 1 mg cm(-2) or 0 x 5 mg cm(-2) makes the SPF fall as the square or fourth root, respectively ...”Checked by Product.ai on 2026-10-16The study's abstract reporting a linear rather than exponential relation between sunscreen quantity and SPF, or basing the declared SPF on a layer other than 2 milligrams per square centimeter.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Does SPF 50 or SPF 100 protect better than SPF 30 in real life?
In a PLOS ONE study by Heerfordt and colleagues, participants missed a median of 20% of their available body surface after a single sunscreen application and 9% after double application.PLOS ONE (Heerfordt, Torsnes, Philipsen and Wulf) (2018)“Participants had missed a median of 20% of their available body surface after a single application. After double application they had missed 9%.”Checked by Product.ai on 2026-10-16The PLOS ONE paper reporting a different median missed area than 20% after one application or 9% after double application.Research area Primary source readingCited in Skin type & outdoor sweat, SPF numbers & UVA protection, Does SPF 50 or SPF 100 protect better than SPF 30 in real life?
CivicScience's June 2023 survey of U.S. households found Coppertone the most favorable of six sunscreen brands at 58%.CivicScience (2023-06-20)“A close look at six sunscreen brands shows that Coppertone is most favorable among U.S. households (58%).”Checked by Product.ai on 2026-10-16CivicScience's page dated June 20, 2023 names a different brand as most favorable, or gives Coppertone a figure other than 58%.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands
The FDA's 2011 sunscreen labeling rule says the broad spectrum test (the test for protection across both UVA and UVB rays) is a pass or fail test based on a critical wavelength value of 370 nm (nanometers, a measure of light wavelength). The same rule says FDA is not requiring a star rating or descriptors to indicate the level of UVA protection (protection from the longer wavelength UV rays).Food and Drug Administration, Federal Register (via govinfo.gov) (2011-06-17)“The broad spectrum test is a pass/fail test based on the critical wavelength value of 370 nm ... We are not requiring a star rating or descriptors to indicate the level of UVA protection as proposed.”Checked by Product.ai on 2026-10-16A current FDA sunscreen regulation or final rule that requires a numerical UVA protection factor or a UVA star rating on US sunscreen labels.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?
The European Commission's 2006 recommendation on sunscreen efficacy says a sunscreen's UVA protection factor (a measure of protection against UVA rays) should be 1/3 of its sun protection factor (SPF, the sunburn protection number), as obtained with the persistent pigment darkening method (a skin darkening test) as modified by the French health agency.European Commission, Official Journal of the European Union (EUR-Lex) (2006-09-22)“a UVA protection of UVA protection factor of 1/3 of the sun protection factor, as obtained in application of the persistent pigment darkening method as modified by the French health agency”Checked by Product.ai on 2026-10-16The text of Commission Recommendation 2006/647/EC point 10(b) stating a UVA protection factor threshold other than 1/3 of the sun protection factor.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands, SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?
FDA's sunscreen page says FDA added bemotrizinol as a permitted active ingredient for use in sunscreens.U.S. Food and Drug Administration (2026-10-16)“FDA added bemotrizinol as a permitted active ingredient for use in sunscreens”Checked by Product.ai on 2026-10-16FDA's sunscreen page or the OTC Monographs@FDA portal not listing bemotrizinol as a permitted sunscreen active ingredient.Research area Primary source readingCited in Skin type & outdoor sweat, How does US Broad Spectrum compare with European and PA++++ UVA ratings?
Annex VI of EU Regulation 1223/2009, in the consolidated text of 18 May 2026, lists Terephthalylidene Dicamphor Sulfonic Acid (10% as acid), Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (10%) and Diethylamino Hydroxybenzoyl Hexyl Benzoate (10%) among the UV filters (sunscreen ingredients that absorb UV rays) allowed in cosmetic products.European Commission (2026-05-18)“LIST OF UV FILTERS ALLOWED IN COSMETIC PRODUCTS ... Terephthalylidene Dicamphor Sulfonic Acid ... 10 %(as acid) ... Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine ... 10 % ... Diethylamino Hydroxybenzoyl Hexyl Benzoate ... 10 %”Checked by Product.ai on 2026-10-16A later consolidated Annex VI that removes one of these three entries or sets a different maximum concentration for it, including the as-acid basis for the first.Research area Primary source readingCited in Skin type & outdoor sweat, How does US Broad Spectrum compare with European and PA++++ UVA ratings?
A 2021 survey in the International Journal of Women's Dermatology went to 218 dermatology trainees and faculty at hospitals affiliated with Harvard Medical School, and 77 took part (35.3% response rate). Its table of sunscreen brands those dermatologists most frequently recommended lists Neutrogena 37 (48%), Elta MD 27 (35.1%), CeraVe 17 (22.1%), La Roche-Posay 14 (18.2%) and Vanicream 9 (11.7%).International Journal of Women's Dermatology (via PubMed Central) (2021)“There were 218 surveys sent out to dermatology trainees and dermatology faculty across all hospitals affiliated with Harvard Medical School ... 77 consented to participate in the survey (response rate: 35.3%). ... Most frequently recommended sunscreen brands by dermatologists. Brand n (%) Neutrogena 37 (48) Elta MD 27 (35.1) Cerave 17 (22.1) La Roche-Posay 14 (18.2) Vanicream 9 (11.7)”Checked by Product.ai on 2026-10-16The paper's methods naming a different respondent count or a sample beyond Harvard Medical School affiliated hospitals, or its table of most frequently recommended sunscreen brands giving different counts or percentages for these brands.Research area Primary source readingCited in Skin type & outdoor sweat, Derm, Asian & everyday brands
The DailyMed label for La Roche-Posay Anthelios Face Light Fluid Sunscreen, filed by L'Oreal USA Products Inc, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 7% as its active ingredients.DailyMed (U.S. National Library of Medicine), label filed by L'Oreal USA Products Inc (2024-01-31)“Avobenzone 3% Homosalate 10% Octisalate 5% Octocrylene 7%”Checked by Product.ai on 2026-10-16The current DailyMed label for this product listing a different active ingredient or a different percentage.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
L'Oréal's press release of 24 May 2022 says Anthelios UVMune 400 was launched in pharmacies in March 2022 and was available at that time as either an Invisible Fluid SPF50+ or a Hydrating Cream SPF50+ (SPF is sun protection factor).L'Oréal Groupe (2022-05-24)“Anthelios UVMune 400 was launched in pharmacies in March 2022 and is available as either Invisible Fluid SPF50+ or Hydrating Cream SPF50+.”Checked by Product.ai on 2026-10-16The release naming a different launch month or year for Anthelios UVMune 400, or a product format other than Invisible Fluid SPF50+ and Hydrating Cream SPF50+.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
The DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55, filed by Kenvue Brands LLC, lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 10% as its active ingredients.DailyMed (U.S. National Library of Medicine), label filed by Kenvue Brands LLC (2026-10-01)“NEUTROGENA ULTRA SHEER DRY TOUCH SUNSCREEN BROAD SPECTRUM SPF55 ... Packager: Kenvue Brands LLC ... Active ingredients Purpose Avobenzone 3% Sunscreen Homosalate 10% Sunscreen Octisalate 5% Sunscreen Octocrylene 10% Sunscreen”Checked by Product.ai on 2026-10-16The current DailyMed label for Neutrogena Ultra Sheer Dry Touch Sunscreen Broad Spectrum SPF 55 listing a different active ingredient or percentage.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
The DailyMed label for Coppertone Sport Sunscreen lotion, filed by Beiersdorf Inc, lists avobenzone 3%, homosalate 15%, octisalate 5% and octocrylene 10% as its active ingredients.DailyMed (U.S. National Library of Medicine), label filed by Beiersdorf Inc (2025-12-31)“Avobenzone 3%, Homosalate 15%, Octisalate 5%, Octocrylene 10%”Checked by Product.ai on 2026-10-16The current DailyMed label for Coppertone Sport Sunscreen lotion listing a different active ingredient or percentage.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
FDA's Drugs@FDA listing for application 021502 shows Anthelios SX as the only over-the-counter (OTC) drug listed with the same active ingredient, strength, and dosage form/route (the form and way it is used), and notes that OTC drugs listed there do not receive therapeutic equivalence ratings (FDA's ratings of whether drugs can be substituted).U.S. Food and Drug Administration, Drugs@FDA (undated)“Other OTC Drugs with the Same Active Ingredient, Strength and Dosage Form/Route ANTHELIOS SX The products listed here are over-the-counter (OTC) drugs and do not receive therapeutic equivalence ratings.”Checked by Product.ai on 2026-10-16FDA's Drugs@FDA listing for application 021502 showing a second over-the-counter drug with the same active ingredient, strength, and dosage form/route alongside Anthelios SX.Research area Primary source readingCited in Derm, Asian & everyday brands
On 16 October 2026, EltaMD's own online store listed UV Clear Broad Spectrum SPF 46 at $46.00 for the 1.7 oz size and $78.00 for the 3.7 oz size.EltaMD (2026-10-16)“"title":"1.7 oz" ... "price":"46.00" ... "title":"3.7 oz" ... "price":"78.00"”Checked by Product.ai on 2026-10-16A dated copy of EltaMD's store listing for UV Clear Broad Spectrum SPF 46 from 16 October 2026 showing a price other than $46.00 for the 1.7 oz size or $78.00 for the 3.7 oz size.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
CeraVe's page for Hydrating Mineral Sunscreen Face Lotion SPF 50 says the formula has three essential ceramides and niacinamide, and lists titanium dioxide 9% and zinc oxide 7% as the active ingredients.CeraVe (undated)“Our formula has three essential ceramides ... as well as niacinamide ... Active Ingredients : Titanium Dioxide (9%), Zinc Oxide (7%) Inactive Ingredients ... Niacinamide ... Ceramide NP, Ceramide AP, Ceramide EOP”Checked by Product.ai on 2026-10-16CeraVe's page for this sunscreen no longer naming niacinamide or ceramides in the formula, or listing different active ingredients or percentages.Research area Primary source readingCited in Derm, Asian & everyday brands, Which sunscreen works for oily, acne-prone, or sensitive skin?, Active filters & daily cost
CeraVe's own product page for Ultra-Light Moisturizing Lotion SPF 30 lists avobenzone 3%, homosalate 10%, octisalate 5% and octocrylene 2.7% as its active ingredients.CeraVe (undated)“ACTIVE INGREDIENTS: AVOBENZONE 3%, HOMOSALATE 10%, OCTISALATE 5%, OCTOCRYLENE 2.7%”Checked by Product.ai on 2026-10-16CeraVe's product page for Ultra-Light Moisturizing Lotion SPF 30 lists a different set of active ingredients or omits avobenzone or octocrylene.Research area Primary source readingCited in Derm, Asian & everyday brands, How does US Broad Spectrum compare with European and PA++++ UVA ratings?, Active filters & daily cost
Dermatology Times reported in February 2006 that Helioplex is a proprietary combination of avobenzone, oxybenzone and a photostabilizing solvent (an ingredient that helps avobenzone resist breaking down in sunlight) called Hallbrite TQ.Dermatology Times (2006-02-01)“Helioplex is a proprietary combination of avobenzone ... oxybenzone and a photostabilizing solvent, Hallbrite TQ”Checked by Product.ai on 2026-10-16The February 2006 Dermatology Times article not describing Helioplex as a combination of avobenzone, oxybenzone and Hallbrite TQ, or a 2006 Neutrogena ingredient disclosure for Helioplex listing no oxybenzone.Research area Primary source readingCited in Derm, Asian & everyday brands, How does US Broad Spectrum compare with European and PA++++ UVA ratings?, Active filters & daily cost
Supergoop's product page for Unseen Sunscreen SPF 50 lists its active ingredients as avobenzone 3%, homosalate 7%, octisalate 5% and octocrylene 9%.Supergoop! (undated)“Avobenzone 3%, Homosalate 7%, Octisalate 5%, Octocrylene 9%”Checked by Product.ai on 2026-10-16The Drug Facts panel on a current Unseen Sunscreen SPF 50 package lists different active ingredients or different percentages.Research area Primary source readingCited in Derm, Asian & everyday brands, Active filters & daily cost
A 2015 abstract in Photodermatology, Photoimmunology & Photomedicine reports that zinc oxide and titanium dioxide reflect only 4 to 5 percent of light across the UV range, and that the rest of the UV protection comes from the particles absorbing UV photons through their semiconductor band gap (the energy a particle needs to take in light).Photodermatology, Photoimmunology & Photomedicine (abstract held by Europe PMC) (2015-11-10)“The average range of reflection for zinc oxide and titanium dioxide throughout the UV range was only 4-5% (less than SPF 2), providing minimal UV protection via this mechanism. The remainder of the UV protection is provided by semiconductor band gap mediated absorbance of the UV photons.”Checked by Product.ai on 2026-10-16A measurement of zinc oxide or titanium dioxide showing average UV reflectance well above 5 percent across the UV range.Research area Primary source readingCited in SPF numbers & UVA protection, How do mineral filters and iron-oxide tints block UV and visible light?
A 2001 abstract in Photochemistry and Photobiology reports that Tinosorb S prevented the photodegradation (breakdown in sunlight) of avobenzone in a concentration-dependent way, meaning more Tinosorb S gave more protection.Photochemistry and Photobiology (abstract served by PubMed, PMID 11594052) (2001-09)“Tinosorb S prevented the photodegradation of AVB in a concentration-dependent way”Checked by Product.ai on 2026-10-16An irradiation test in which adding Tinosorb S does not reduce avobenzone loss, or in which more Tinosorb S gives no further protection.Research area Primary source readingCited in SPF numbers & UVA protection, How does US Broad Spectrum compare with European and PA++++ UVA ratings?
The FDA's sunscreen rule at 21 CFR 201.327 (the Code of Federal Regulations section on sunscreen labeling) defines the minimal erythema dose (MED) as the smallest UV dose that produces perceptible redness of the skin with clearly defined borders at 16 to 24 hours after UV exposure.U.S. Government Publishing Office (govinfo), Code of Federal Regulations, 21 CFR 201.327 (2024-04-01)“The minimal erythema dose (MED) is the smallest UV dose that produces perceptible redness of the skin (erythema) with clearly defined borders at 16 to 24 hours after UV exposure.”Checked by Product.ai on 2026-10-16The current text of 21 CFR 201.327 defining the minimal erythema dose as something other than the smallest UV dose that produces perceptible redness, or at a time other than 16 to 24 hours.Research area Primary source readingCited in Does SPF 50 or SPF 100 protect better than SPF 30 in real life?
Johnson & Johnson Consumer Inc. said on July 14, 2021 that its internal testing found low levels of benzene in some samples and that the only sunscreen products affected by its voluntary recall were aerosol products.Johnson & Johnson (2021-07-14)“Internal testing identified low levels of benzene in some samples of the products. ... The only sunscreen products impacted are aerosol products, specifically:”Checked by Product.ai on 2026-10-16The July 14, 2021 release names non-aerosol sunscreen products in the recall or attributes the detection to a party other than the company's internal testing.Research area Primary source readingCited in Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
The U.S. Food and Drug Administration says sunscreen labels must tell buyers to protect the product in its container from excessive heat and direct sun, and that a sunscreen product without an expiration date should be considered expired three years after purchase.U.S. Food and Drug Administration (2026-10-16)“This is why sunscreen labels must say: 'Protect the product in this container from excessive heat and direct sun.' ... That means a sunscreen product that doesn't have an expiration date should be considered expired three years after purchase”Checked by Product.ai on 2026-10-16The FDA page dropping the required heat-and-sun label statement or stating a horizon other than three years for an undated sunscreen.Research area Primary source readingCited in Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
A lab study by Spencer and Young in the Journal of Emerging Investigators tested 22 sunscreens by spreading them on plastic wrap placed on an ultraviolet (UV) light, after storing them for 18 to 24 hours at temperatures from -10°C to 50°C. Sunscreens stored at 50°C blocked 64.8% of UV light, and those stored at -10°C blocked 74%.Journal of Emerging Investigators (Spencer SN, Young RR) (2026-05-26)“We tested 22 sunscreens by spreading sunscreen on plastic wrap placed on a UV light. ... Before adding to plastic wrap, sunscreens were stored at -10°C, 6°C, 22°C, 40°C, and 50°C for 18-24 hours before measuring UV absorption. ... Sunscreens stored at -10°C blocked 74% of UV light. Sunscreens stored at 50°C blocked only 64.8% of UV light.”Checked by Product.ai on 2026-10-16The study's abstract giving a count other than 22 sunscreens, a storage period other than 18 to 24 hours, or equal or higher UV blocking for sunscreens stored at 50 degrees Celsius than for those stored at minus 10 degrees.Research area Primary source readingCited in Active filters & daily cost, Does sunscreen expire, how often do you reapply, and how do you wash it off?
The Legislature of the State of Hawaii made it unlawful, beginning January 1, 2021, to sell, offer for sale, or distribute for sale in the state any sunscreen that contains oxybenzone or octinoxate without a prescription issued by a licensed healthcare provider.Legislature of the State of Hawaii (Session Laws of Hawaii 2018) (2018-07-03)“Beginning January 1, 2021, it shall be unlawful to sell, offer for sale, or distribute for sale in the State any sunscreen that contains oxybenzone or octinoxate, or both, without a prescription issued by a licensed healthcare provider.”Checked by Product.ai on 2026-10-16The enacted text of Act 104 (HRS 342D) names different chemicals, a different start date, or no prescription exception.Research area Primary source readingCited in Does sunscreen expire, how often do you reapply, and how do you wash it off?

Challenge a reading

Think a finding here misstates its primary source? Tell us which one and why.

Check a sunscreen claim on Product.ai

Check a sunscreen claim

Evidence freshness

Readings checked on 2026-10-16.

Who publishes this

Demand.io, Inc. · founded 2009 · Product.ai checks product claims against primary sources. · Product.ai · llms.txt

How this page was made: Product.ai builds each guide from primary-source readings using AI-assisted workflows under human editorial review, so shoppers can check every finding against its cited source rather than affiliate rankings.

Agents get structured access by key, and search crawlers read the same free pages as everyone.